This is the 6.1.84 stable release
* tag 'v6.1.84': (1865 commits)
Linux 6.1.84
tools/resolve_btfids: fix build with musl libc
USB: core: Fix deadlock in usb_deauthorize_interface()
x86/sev: Skip ROM range scans and validation for SEV-SNP guests
scsi: libsas: Fix disk not being scanned in after being removed
scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()
scsi: lpfc: Correct size for wqe for memset()
scsi: lpfc: Correct size for cmdwqe/rspwqe for memset()
tls: fix use-after-free on failed backlog decryption
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
scsi: qla2xxx: Fix double free of fcport
scsi: qla2xxx: Fix command flush on cable pull
scsi: qla2xxx: NVME|FCP prefer flag not being honored
scsi: qla2xxx: Update manufacturer detail
scsi: qla2xxx: Split FCE|EFT trace control
scsi: qla2xxx: Fix N2N stuck connection
scsi: qla2xxx: Prevent command send on chip reset
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
...
Change-Id: If6edd552c88012d97f5eefc5e1d97a4f1683f171
Conflicts:
drivers/gpu/drm/bridge/sii902x.c
drivers/gpu/drm/rockchip/rockchip_lvds.c
drivers/media/i2c/imx335.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci-plat.c
sound/soc/rockchip/rockchip_i2s_tdm.c
commit 08e23d05fa6dc4fc13da0ccf09defdd4bbc92ff4 upstream.
Fix buffer overflow in trans_stat_show().
Convert simple snprintf to the more secure scnprintf with size of
PAGE_SIZE.
Add condition checking if we are exceeding PAGE_SIZE and exit early from
loop. Also add at the end a warning that we exceeded PAGE_SIZE and that
stats is disabled.
Return -EFBIG in the case where we don't have enough space to write the
full transition table.
Also document in the ABI that this function can return -EFBIG error.
Link: https://lore.kernel.org/all/20231024183016.14648-2-ansuelsmth@gmail.com/
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041
Fixes: e552bbaf5b ("PM / devfreq: Add sysfs node for representing frequency transition information.")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 6.1.57 stable release
* tag 'v6.1.57': (2054 commits)
Linux 6.1.57
xen/events: replace evtchn_rwlock with RCU
ipv6: remove one read_lock()/read_unlock() pair in rt6_check_neigh()
btrfs: file_remove_privs needs an exclusive lock in direct io write
netlink: remove the flex array from struct nlmsghdr
btrfs: fix fscrypt name leak after failure to join log transaction
btrfs: fix an error handling path in btrfs_rename()
vrf: Fix lockdep splat in output path
ipv6: remove nexthop_fib6_nh_bh()
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
ksmbd: fix uaf in smb20_oplock_break_ack
ksmbd: fix race condition between session lookup and expire
x86/sev: Use the GHCB protocol when available for SNP CPUID requests
RDMA/mlx5: Fix NULL string error
RDMA/mlx5: Fix mutex unlocking on error flow for steering anchor creation
RDMA/siw: Fix connection failure handling
RDMA/srp: Do not call scsi_done() from srp_abort()
RDMA/uverbs: Fix typo of sizeof argument
RDMA/cma: Fix truncation compilation warning in make_cma_ports
RDMA/cma: Initialize ib_sa_multicast structure to 0 when join
...
Change-Id: I79b925ca5822e02e0b9f497b1db93fef0e1dadd3
Conflicts:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/iommu/rockchip-iommu.c
drivers/power/supply/rk817_charger.c
drivers/scsi/sd.c
include/linux/pci.h
commit 5693d077595de721f9ddbf9d37f40e5409707dfe upstream.
srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.
Reported by kmemleak.
Fixes: 0fe3a66410 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fdded8448924e3631d466eea499b11606c43640 upstream.
The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.
The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.
Fixes: ce26c5bb95 ("PM / devfreq: Add basic governors")
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are 4 warnings there:
drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'val' not described in 'qos_min_notifier_call'
drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'ptr' not described in 'qos_min_notifier_call'
drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'val' not described in 'qos_max_notifier_call'
drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'ptr' not described in 'qos_max_notifier_call'
It turns that neither val nor ptr are actually used on those
function, so document as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
On a devfreq PROBE_DEFER, the freq_table in the driver profile struct,
is never reset and may be leaved in an undefined state.
This comes from the fact that we store the freq_table in the driver
profile struct that is commonly defined as static and not reset on
PROBE_DEFER.
We currently skip the reinit of the freq_table if we found
it's already defined since a driver may declare his own freq_table.
This logic is flawed in the case devfreq core generate a freq_table, set
it in the profile struct and then PROBE_DEFER, freeing the freq_table.
In this case devfreq will found a NOT NULL freq_table that has been
freed, skip the freq_table generation and probe the driver based on the
wrong table.
To fix this and correctly handle PROBE_DEFER, use a local freq_table and
max_state in the devfreq struct and never modify the freq_table present
in the profile struct if it does provide it.
Fixes: 0ec09ac2ce ("PM / devfreq: Set the freq_table of devfreq device")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Don't print warning when a governor PROBE_DEFER as it's not a real
GOV_START fail.
Fixes: a03dacb031 ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Suppose devfreq_update_status() failure in devfreq_set_target() is not a
critical error, reduces the log severity.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
https://source.android.com/security/bulletin/2021-12-01
CVE-2021-33909
CVE-2021-38204
CVE-2021-0961
* tag 'ASB-2021-12-05_12-5.10': (3010 commits)
ANDROID: workqueue: export symbol of the function wq_worker_comm()
ANDROID: GKI: Update symbols to symbol list
ANDROID: vendor_hooks: Add hooks for binder proc transaction
ANDROID: GKI: Add symbols abi for USB IP kernel modules.
ANDROID: GKI: Fix file mode on mtk abi file
UPSTREAM: erofs: fix deadlock when shrink erofs slab
ANDROID: init_task: Init android vendor and oem data
UPSTREAM: sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
ANDROID: Update symbol list for mtk
UPSTREAM: erofs: fix unsafe pagevec reuse of hooked pclusters
UPSTREAM: erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()
UPSTREAM: usb: dwc3: gadget: Fix null pointer exception
ANDROID: fips140: support "evaluation testing" builds via build.sh
FROMGIT: sched/scs: Reset task stack state in bringup_cpu()
ANDROID: dma-buf: heaps: fix dma-buf heap pool pages stat
ANDROID: ABI: Add several spi_mem related symbols
UPSTREAM: spi: spi-mem: add spi_mem_dtr_supports_op()
ANDROID: gki_defconfig: enable CONFIG_SPI_MEM
ANDROID: ABI: Add several iio related symbols
ANDROID: ABI: Update symbol list for IMX
...
Change-Id: I09cddc92fa34553b944e62cc5cbbba94a84e5437
Conflicts:
arch/arm/boot/dts/rk322x.dtsi
arch/arm64/boot/dts/rockchip/rk3399.dtsi
drivers/dma-buf/heaps/system_heap.c
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_lvds.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/mtd/nand/spi/core.c
drivers/pci/controller/pcie-rockchip-host.c
drivers/soc/rockchip/Kconfig
drivers/usb/dwc3/core.c
drivers/usb/dwc3/core.h
Since commit ea572f8160 ("PM / devfreq: Change return type of
devfreq_set_freq_table()"), all devfreq devices are expected to have a
valid freq_table. The devfreq core unconditionally dereferences
freq_table in the sysfs code and in get_freq_range().
Therefore, we need to ensure that freq_table is both non-null and
non-empty (length is > 0). If either check fails, replace the table
using set_freq_table() or return the error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ Upstream commit 18b380ed61 ]
Set err code in the error path before jumping to the end of the function.
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Calculate current load with busytime / totaltime from status,
also show the current frequency.
Change-Id: Ic310035db9c5478aa3d0b1e526b47c451fe09d23
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Set err code in the error path before jumping to the end of the function.
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ Upstream commit 62453f1ba5 ]
Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.
Fixes: 83f8ca45af ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8b50a79957 upstream.
The devfreq->lock is held for time of setup. Release the lock in the
error path, before jumping to the end of the function.
Change the goto destination which frees the allocated memory.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.
Fixes: 83f8ca45af ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq->lock is held for time of setup. Release the lock in the
error path, before jumping to the end of the function.
Change the goto destination which frees the allocated memory.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Currently the default behavior is to manually having the devfreq
backend to register themselves as a devfreq cooling device.
Instead of adding the code in the drivers for the thermal cooling
device registering, let's provide a flag in the devfreq's profile to
tell the common devfreq code to register the newly created devfreq as
a cooling device.
Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
