This is the 6.1.99 stable release
* tag 'v6.1.99': (1975 commits)
Linux 6.1.99
Revert "usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB"
Linux 6.1.98
nilfs2: fix incorrect inode allocation from reserved inodes
null_blk: Do not allow runt zone with zone capacity smaller then zone size
spi: cadence: Ensure data lines set to low during dummy-cycle period
nfc/nci: Add the inconsistency check between the input data length and count
kbuild: fix short log for AS in link-vmlinux.sh
nvmet: fix a possible leak when destroy a ctrl during qp establishment
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
regmap-i2c: Subtract reg size from max_write
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
nvme-multipath: find NUMA path only for online numa-node
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
fs/ntfs3: Mark volume as dirty if xattr is broken
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
...
Change-Id: Ibf9c2caa3bbffb7a960e82ec6c2b0b497753778c
Conflicts:
arch/arm64/boot/dts/rockchip/rk3328.dtsi
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
drivers/pinctrl/pinctrl-rockchip.c
drivers/usb/gadget/function/u_audio.c
include/linux/usb/quirks.h
mm/cma.c
sound/soc/rockchip/rockchip_i2s_tdm.c
Current Code USB2 PHY use extcon notifier to send USB charger
types to power driver. If we use gpio to detect vbus or id state,
the extcon device is allocated and registered by extcon-usb-gpio.c
driver and USB2 PHY obtains this extcon device through DTS. If
these cables are missing, it will cause USB2 PHY driver to be
unable to set the status of these cables, leading to functional
abnormalities.
Change-Id: Iec27dfde4ec8bf12294bd6c57c3db5dada2f35cd
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Jianwei Zheng <jianwei.zheng@rock-chips.com>
[ Upstream commit b1781d0a1458070d40134e4f3412ec9d70099bec ]
IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change EXTCON_MAX8997's use of "depends on" for
IRQ_DOMAIN to "select".
Link: https://lore.kernel.org/lkml/20240213060028.9744-1-rdunlap@infradead.org/
Fixes: dca1a71e41 ("extcon: Add support irq domain for MAX8997 muic")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is the 6.1.57 stable release
* tag 'v6.1.57': (2054 commits)
Linux 6.1.57
xen/events: replace evtchn_rwlock with RCU
ipv6: remove one read_lock()/read_unlock() pair in rt6_check_neigh()
btrfs: file_remove_privs needs an exclusive lock in direct io write
netlink: remove the flex array from struct nlmsghdr
btrfs: fix fscrypt name leak after failure to join log transaction
btrfs: fix an error handling path in btrfs_rename()
vrf: Fix lockdep splat in output path
ipv6: remove nexthop_fib6_nh_bh()
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
ksmbd: fix uaf in smb20_oplock_break_ack
ksmbd: fix race condition between session lookup and expire
x86/sev: Use the GHCB protocol when available for SNP CPUID requests
RDMA/mlx5: Fix NULL string error
RDMA/mlx5: Fix mutex unlocking on error flow for steering anchor creation
RDMA/siw: Fix connection failure handling
RDMA/srp: Do not call scsi_done() from srp_abort()
RDMA/uverbs: Fix typo of sizeof argument
RDMA/cma: Fix truncation compilation warning in make_cma_ports
RDMA/cma: Initialize ib_sa_multicast structure to 0 when join
...
Change-Id: I79b925ca5822e02e0b9f497b1db93fef0e1dadd3
Conflicts:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/iommu/rockchip-iommu.c
drivers/power/supply/rk817_charger.c
drivers/scsi/sd.c
include/linux/pci.h
This is the 6.1.43 stable release
* tag 'v6.1.43': (3386 commits)
Linux 6.1.43
dma-buf: fix an error pointer vs NULL bug
dma-buf: keep the signaling time of merged fences v3
test_firmware: return ENOMEM instead of ENOSPC on failed memory allocation
selftests: mptcp: sockopt: use 'iptables-legacy' if available
mptcp: ensure subflow is unhashed before cleaning the backlog
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
drm/amd/display: Write to correct dirty_rect
drm/amd/display: perform a bounds check before filling dirty rectangles
tracing: Fix trace_event_raw_event_synth() if else statement
drm/amd/display: set per pipe dppclk to 0 when dpp is off
rbd: retrieve and check lock owner twice before blocklisting
rbd: harden get_lock_owner_info() a bit
rbd: make get_lock_owner_info() return a single locker or NULL
dm cache policy smq: ensure IO doesn't prevent cleaner policy progress
drm/i915/dpt: Use shmem for dpt objects
ceph: never send metrics if disable_send_metrics is set
PM: sleep: wakeirq: fix wake irq arming
...
Conflicts:
arch/arm/boot/dts/rk3288.dtsi
arch/arm64/boot/dts/rockchip/rk3568.dtsi
arch/arm64/boot/dts/rockchip/rk356x.dtsi
drivers/dma/pl330.c
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/mmc/core/card.h
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
drivers/nvme/host/nvme.h
drivers/pci/controller/pcie-rockchip.c
drivers/power/supply/rk817_charger.c
drivers/tty/serial/8250/8250_port.c
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/udc/core.c
drivers/usb/host/xhci.h
drivers/usb/typec/tcpm/tcpm.c
Revert commit c649bf43a2 ("net: ethernet: stmmac: dwmac-rk: rework optional clock handling").
Change-Id: Ib0117e96e04e9a15543ebb69c1a873ba44e41546
[ Upstream commit d20a3a8a32e3fa564ff25da860c5fc1a97642dfe ]
The driver fails to link when CONFIG_POWER_SUPPLY is disabled:
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop':
extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event':
extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe':
extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register'
It should be possible to change the driver to not require this at
compile time and still provide other functions, but adding a hard
Kconfig dependency does not seem to have any practical downsides
and is simpler since the option is normally enabled anyway.
Fixes: 66e31186cd ("extcon: intel-cht-wc: Add support for registering a power_supply class-device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3adbaa30d973093a4f37927baf9596cca51b593d ]
The driver can register a typec port if suitable firmware properties are
present. But if the driver is removed through sysfs unbind, rmmod or
similar, then it does not clean up after itself and the typec port
device remains registered. This can be seen in sysfs, where stale typec
ports get left over in /sys/class/typec.
In order to fix this we have to add an i2c_driver remove function and
call typec_unregister_port(), which is a no-op in the case where no
typec port is created and the pointer remains NULL.
In the process we should also put the fwnode_handle when the typec port
isn't registered anymore, including if an error occurs during probe. The
typec subsystem does not increase or decrease the reference counter for
us, so we track it in the driver's private data.
Note that the conditional check on TYPEC_PWR_MODE_PD was removed in the
probe path because a call to tusb320_set_adv_pwr_mode() will perform an
even more robust validation immediately after, hence there is no
functional change here.
Fixes: bf7571c00d ("extcon: usbc-tusb320: Add USB TYPE-C support")
Cc: stable@vger.kernel.org
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5313121b22fd11db0d14f305c110168b8176efdc ]
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 3adbaa30d973 ("extcon: usbc-tusb320: Unregister typec port on driver removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73346b9965ebda2feb7fef8629e9b28baee820e3 ]
Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:
Function parameter or member 'usb_bits' not described in 'extcon_cable'
Function parameter or member 'chg_bits' not described in 'extcon_cable'
Function parameter or member 'jack_bits' not described in 'extcon_cable'
Function parameter or member 'disp_bits' not described in 'extcon_cable'
Describe the fields added in the past.
Fixes: ceaa98f442 ("extcon: Add the support for the capability of each property")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e77e0b7a9f4cdf91cb0950749b40c840ea63efc ]
Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:
Function parameter or member 'usb_propval' not described in 'extcon_cable'
Function parameter or member 'chg_propval' not described in 'extcon_cable'
Function parameter or member 'jack_propval' not described in 'extcon_cable'
Function parameter or member 'disp_propval' not described in 'extcon_cable'
Describe the fields added in the past.
Fixes: 067c1652e7 ("extcon: Add the support for extcon property according to extcon type")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]
Currently this driver triggers extcon and typec state update in its
probe function, to read out current state reported by the chip and
report the correct state to upper layers. This synchronization is
performed correctly, but only in case the chip indicates a pending
interrupt in reg09 register.
This fails to cover the situation where all interrupts reported by
the chip were already handled by Linux before reboot, then the system
rebooted, and then Linux starts again. In this case, the TUSB320 no
longer reports any interrupts in reg09, and the state update does not
perform any update as it depends on that interrupt indication.
Fix this by turning tusb320_irq_handler() into a thin wrapper around
tusb320_state_update_handler(), where the later now contains the bulk
of the code of tusb320_irq_handler(), but adds new function parameter
"force_update". The "force_update" parameter can be used by the probe
function to assure that the state synchronization is always performed,
independent of the interrupt indicated in reg09. The interrupt handler
tusb320_irq_handler() callback uses force_update=false to avoid state
updates on potential spurious interrupts and retain current behavior.
Fixes: 06bc4ca115 ("extcon: Add driver for TI TUSB320")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Fix the warning:
drivers/extcon/extcon-usbc-tusb320.c:19: warning: expecting prototype
for drivers/extcon/extcon-tusb320.c(). Prototype was for TUSB320_REG8()
instead
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The TI TUSB320 seems like a better fit for USB TYPE-C subsystem,
which can expose details collected by the TUSB320 in a far more
precise way than extcon. Since there are existing users in the
kernel and in DT which depend on the extcon interface, keep it
for now.
Add TYPE-C interface and expose the supported supply current,
direction and connector polarity via the TYPE-C interface.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Move extcon code into separate functions in preparation for addition of
USB TYPE-C support. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There's no need to set the flag explicitly to false, since that
is the default value from zero initialization.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There's no need to set the flag explicitly to false, since that
is the default value from zero initialization.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
there is an unexpected word "the" in the comments that need to be dropped
file: ./drivers/extcon/extcon.c
line: 250
/* Find the the index of extcon cable in edev->supported_cable */
changed to
/* Find the index of extcon cable in edev->supported_cable */
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
