documentation: convert the Documentation directory to UTF-8

Convert files within the Documentation directory to UTF-8. Adrian Bunk: small additional fixes Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2026-01-06 11:08:10 -08:00 · 2007-05-09 08:50:42 +02:00
parent dd4ef01c40
commit be2a608bd0
45 changed files with 85 additions and 85 deletions
--- a/Documentation/arm/Samsung-S3C24XX/H1940.txt
+++ b/Documentation/arm/Samsung-S3C24XX/H1940.txt
@@ -23,7 +23,7 @@ Support

    http://handhelds.org/moin/moin.cgi/HpIpaqH1940

-  Herbert Pötzl pages:
+  Herbert Pötzl pages:

    http://vserver.13thfloor.at/H1940/

@@ -32,7 +32,7 @@ Maintainers
 -----------

  This project is being maintained and developed by a variety
-  of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
+  of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.

  Thanks to the many others who have also provided support.

--- a/Documentation/auxdisplay/cfag12864b
+++ b/Documentation/auxdisplay/cfag12864b
@@ -78,9 +78,9 @@ Select (17)------------------------------(16) Data / Instruction
 Ground (18)---[GND]              [+5v]---(19) LED +
 Ground (19)---[GND]
 Ground (20)---[GND]              E    A             Values:
-Ground (21)---[GND]       [GND]---[P1]---(18) Vee    · R = Resistor = 22 ohm
-Ground (22)---[GND]                |                 · P1 = Preset = 10 Kohm
-Ground (23)---[GND]       ----   S ------( 3) V0     · P2 = Preset = 1 Kohm
+Ground (21)---[GND]       [GND]---[P1]---(18) Vee    - R = Resistor = 22 ohm
+Ground (22)---[GND]                |                 - P1 = Preset = 10 Kohm
+Ground (23)---[GND]       ----   S ------( 3) V0     - P2 = Preset = 1 Kohm
 Ground (24)---[GND]       |  |
 Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -

--- a/Documentation/binfmt_misc.txt
+++ b/Documentation/binfmt_misc.txt
@@ -113,4 +113,4 @@ cause unexpected behaviour and can be a security hazard.
 There is a web page about binfmt_misc at
 http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html

-Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
+Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
--- a/Documentation/crypto/api-intro.txt
+++ b/Documentation/crypto/api-intro.txt
@@ -177,7 +177,7 @@ Portions of this API were derived from the following projects:
 and;
  
  Nettle (http://www.lysator.liu.se/~nisse/nettle/)
-    Niels Möller
+    Niels Möller

 Original developers of the crypto algorithms:

@@ -200,8 +200,8 @@ SHA1 algorithm contributors:
  
 DES algorithm contributors:
  Raimar Falke
-  Gisle Sælensminde
-  Niels Möller
+  Gisle Sælensminde
+  Niels Möller

 Blowfish algorithm contributors:
  Herbert Valerio Riedel
--- a/Documentation/dvb/README.dvb-usb
+++ b/Documentation/dvb/README.dvb-usb
@@ -228,5 +228,5 @@ Patches, comments and suggestions are very very welcome.

   Ulf Hermenau for helping me out with traditional chinese.

-   André Smoktun and Christian Frömmel for supporting me with
+   André Smoktun and Christian Frömmel for supporting me with
    hardware and listening to my problems very patiently.
--- a/Documentation/dvb/contributors.txt
+++ b/Documentation/dvb/contributors.txt
@@ -66,7 +66,7 @@ Michael Dreher <michael@5dot1.de>
 Andreas 'randy' Weinberger
  for the support of the Fujitsu-Siemens Activy budget DVB-S

-Kenneth Aafløy <ke-aa@frisurf.no>
+Kenneth Aafløy <ke-aa@frisurf.no>
  for adding support for Typhoon DVB-S budget card

 Ernst Peinlich <e.peinlich@inode.at>
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -215,11 +215,11 @@ vertical retrace time is the sum of the upper margin, the lower margin and the
 vsync length.

  +----------+---------------------------------------------+----------+-------+
-  |          |                ^                            |          |       |
+  |          |                ↑                            |          |       |
  |          |                |upper_margin                |          |       |
-  |          |                ¥                            |          |       |
+  |          |                ↓                            |          |       |
  +----------###############################################----------+-------+
-  |          #                ^                            #          |       |
+  |          #                ↑                            #          |       |
  |          #                |                            #          |       |
  |          #                |                            #          |       |
  |          #                |                            #          |       |
@@ -238,15 +238,15 @@ vsync length.
  |          #                |                            #          |       |
  |          #                |                            #          |       |
  |          #                |                            #          |       |
-  |          #                ¥                            #          |       |
+  |          #                ↓                            #          |       |
  +----------###############################################----------+-------+
-  |          |                ^                            |          |       |
+  |          |                ↑                            |          |       |
  |          |                |lower_margin                |          |       |
-  |          |                ¥                            |          |       |
+  |          |                ↓                            |          |       |
  +----------+---------------------------------------------+----------+-------+
-  |          |                ^                            |          |       |
+  |          |                ↑                            |          |       |
  |          |                |vsync_len                   |          |       |
-  |          |                ¥                            |          |       |
+  |          |                ↓                            |          |       |
  +----------+---------------------------------------------+----------+-------+

 The frame buffer device expects all horizontal timings in number of dotclocks
--- a/Documentation/fb/sstfb.txt
+++ b/Documentation/fb/sstfb.txt
@@ -2,9 +2,9 @@
 Introduction

 	  This is a frame buffer device driver for 3dfx' Voodoo Graphics 
-	(aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based 
+	(aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based 
 	video boards. It's highly experimental code, but is guaranteed to work
-	on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
+	on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
 	and with me "between chair and keyboard". Some people tested other
 	combinations and it seems that it works.
 	  The main page is located at <http://sstfb.sourceforge.net>, and if
--- a/Documentation/hwmon/adm1026
+++ b/Documentation/hwmon/adm1026
@@ -80,7 +80,7 @@ temperature sensor inputs. Both the PWM output and the DAC output can be
 used to control fan speed. Usually only one of these two outputs will be
 used. Write the minimum PWM or DAC value to the appropriate control
 register. Then set the low temperature limit in the tmin values for each
-temperature sensor. The range of control is fixed at 20 °C, and the
+temperature sensor. The range of control is fixed at 20 °C, and the
 largest difference between current and tmin of the temperature sensors sets
 the control output. See the datasheet for several example circuits for
 controlling fan speed with the PWM and DAC outputs. The fan speed sensors
--- a/Documentation/hwmon/gl518sm
+++ b/Documentation/hwmon/gl518sm
@@ -13,7 +13,7 @@ Supported chips:

 Authors:
        Frodo Looijaard <frodol@dds.nl>,
-        Kyösti Mälkki <kmalkki@cc.hut.fi>
+        Kyösti Mälkki <kmalkki@cc.hut.fi>
        Hong-Gunn Chew <hglinux@gunnet.org>
        Jean Delvare <khali@linux-fr.org>

--- a/Documentation/hwmon/lm83
+++ b/Documentation/hwmon/lm83
@@ -45,7 +45,7 @@ Unconfirmed motherboards:
 The LM82 is confirmed to have been found on most AMD Geode reference
 designs and test platforms.

-The driver has been successfully tested by Magnus Forsström, who I'd
+The driver has been successfully tested by Magnus Forsström, who I'd
 like to thank here. More testers will be of course welcome.

 The fact that the LM83 is only scarcely used can be easily explained.
--- a/Documentation/hwmon/sis5595
+++ b/Documentation/hwmon/sis5595
@@ -8,7 +8,7 @@ Supported chips:
    Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.

 Authors:
-        Kyösti Mälkki <kmalkki@cc.hut.fi>,
+        Kyösti Mälkki <kmalkki@cc.hut.fi>,
        Mark D. Studebaker <mdsxyz123@yahoo.com>,
        Aurelien Jarno <aurelien@aurel32.net> 2.6 port

--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -8,7 +8,7 @@ Supported chips:
    Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)

 Authors:
-        Kyösti Mälkki <kmalkki@cc.hut.fi>,
+        Kyösti Mälkki <kmalkki@cc.hut.fi>,
        Mark D. Studebaker <mdsxyz123@yahoo.com>
        Bob Dougherty <bobd@stanford.edu>
        (Some conversion-factor data were contributed by
--- a/Documentation/hwmon/w83792d
+++ b/Documentation/hwmon/w83792d
@@ -107,7 +107,7 @@ Known problems:
 	  by CR[0x49h].
 	- The function of vid and vrm has not been finished, because I'm NOT
 	  very familiar with them. Adding support is welcome.
- 	- The function of chassis open detection needs more tests.
+ 	- The function of chassis open detection needs more tests.
 	- If you have ASUS server board and chip was not found: Then you will
 	  need to upgrade to latest (or beta) BIOS. If it does not help please
 	  contact us.
--- a/Documentation/i2c/busses/i2c-i810
+++ b/Documentation/i2c/busses/i2c-i810
@@ -7,7 +7,7 @@ Supported adapters:
 Authors: 
 	Frodo Looijaard <frodol@dds.nl>, 
 	Philip Edelbrock <phil@netroedge.com>,
-        Kyösti Mälkki <kmalkki@cc.hut.fi>,
+        Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Ralph Metzler <rjkm@thp.uni-koeln.de>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>

--- a/Documentation/i2c/busses/i2c-sis96x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -60,7 +60,7 @@ Mark D. Studebaker <mdsxyz123@yahoo.com>
 - design hints and bug fixes
 Alexander Maylsh <amalysh@web.de>
 - ditto, plus an important datasheet... almost the one I really wanted
-Hans-Günter Lütke Uphues <hg_lu@t-online.de>
+Hans-Günter Lütke Uphues <hg_lu@t-online.de>
 - patch for SiS735
 Robert Zwerus <arzie@dds.nl>
 - testing for SiS645DX
--- a/Documentation/i2c/busses/i2c-via
+++ b/Documentation/i2c/busses/i2c-via
@@ -4,7 +4,7 @@ Supported adapters:
  * VIA Technologies, InC. VT82C586B
    Datasheet: Publicly available at the VIA website

-Author: Kyösti Mälkki <kmalkki@cc.hut.fi>
+Author: Kyösti Mälkki <kmalkki@cc.hut.fi>

 Description
 -----------
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -17,7 +17,7 @@ Supported adapters:
    Datasheet: available on request and under NDA from VIA

 Authors:
-	Kyösti Mälkki <kmalkki@cc.hut.fi>,
+	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
 	Jean Delvare <khali@linux-fr.org>

--- a/Documentation/i2c/i2c-protocol
+++ b/Documentation/i2c/i2c-protocol
@@ -68,7 +68,7 @@ We have found some I2C devices that needs the following modifications:

  Flags I2C_M_IGNORE_NAK
    Normally message is interrupted immediately if there is [NA] from the
-    client. Setting this flag treats any [NA] as [A], and all of
+    client. Setting this flag treats any [NA] as [A], and all of
    message is sent.
    These messages may still fail to SCL lo->hi timeout.

--- a/Documentation/i2o/README
+++ b/Documentation/i2o/README
@@ -30,13 +30,13 @@ Juha Sievanen, University of Helsinki Finland
 	Bug fixes
 	Core code extensions

-Auvo Häkkinen, University of Helsinki Finland
+Auvo Häkkinen, University of Helsinki Finland
 	LAN OSM code
 	/Proc interface to LAN class
 	Bug fixes
 	Core code extensions

-Taneli Vähäkangas, University of Helsinki Finland
+Taneli Vähäkangas, University of Helsinki Finland
 	Fixes to i2o_config

 CREDITS
--- a/Show More
+++ b/Show More