Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...

Documentation/ABI/testing/sysfs-bus-vdpa

@@ -0,0 +1,57 @@
+What:		/sys/bus/vdpa/driver_autoprobe
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		This file determines whether new devices are immediately bound
+		to a driver after the creation. It initially contains 1, which
+		means the kernel automatically binds devices to a compatible
+		driver immediately after they are created.
+
+		Writing "0" to this file disable this feature, any other string
+		enable it.
+
+What:		/sys/bus/vdpa/driver_probe
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		Writing a device name to this file will cause the kernel binds
+		devices to a compatible driver.
+
+		This can be useful when /sys/bus/vdpa/driver_autoprobe is
+		disabled.
+
+What:		/sys/bus/vdpa/drivers/.../bind
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		Writing a device name to this file will cause the driver to
+		attempt to bind to the device. This is useful for overriding
+		default bindings.
+
+What:		/sys/bus/vdpa/drivers/.../unbind
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		Writing a device name to this file will cause the driver to
+		attempt to unbind from the device. This may be useful when
+		overriding default bindings.
+
+What:		/sys/bus/vdpa/devices/.../driver_override
+Date:		November 2021
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		This file allows the driver for a device to be specified.
+		When specified, only a driver with a name matching the value
+		written to driver_override will have an opportunity to bind to
+		the device. The override is specified by writing a string to the
+		driver_override file (echo vhost-vdpa > driver_override) and may
+		be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver. If no driver with a
+		matching name is currently loaded in the kernel, the device will
+		not bind to any driver. This also allows devices to opt-out of
+		driver binding using a driver_override name such as "none".
+		Only a single driver may be specified in the override, there is
+		no support for parsing delimiters.

MAINTAINERS

@@ -20377,6 +20377,7 @@ M:	"Michael S. Tsirkin" <mst@redhat.com>
 M:	Jason Wang <jasowang@redhat.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-vdpa
 F:	Documentation/devicetree/bindings/virtio/
 F:	drivers/block/virtio_blk.c
 F:	drivers/crypto/virtio/

arch/um/drivers/virt-pci.c

@@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev)
 	int i;
 
         /* Stop all virtqueues */
-        vdev->config->reset(vdev);
+        virtio_reset_device(vdev);
         vdev->config->del_vqs(vdev);
 
 	device_set_wakeup_enable(&vdev->dev, false);

drivers/block/virtio_blk.c

@@ -976,7 +976,7 @@ static void virtblk_remove(struct virtio_device *vdev)
 	mutex_lock(&vblk->vdev_mutex);
 
 	/* Stop all the virtqueues. */
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	/* Virtqueues are stopped, nothing can use vblk->vdev anymore. */
 	vblk->vdev = NULL;
@@ -995,7 +995,7 @@ static int virtblk_freeze(struct virtio_device *vdev)
 	struct virtio_blk *vblk = vdev->priv;
 
 	/* Ensure we don't receive any more interrupts */
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	/* Make sure no work handler is accessing the device. */
 	flush_work(&vblk->config_work);

drivers/bluetooth/virtio_bt.c

@@ -367,7 +367,7 @@ static void virtbt_remove(struct virtio_device *vdev)
 	struct hci_dev *hdev = vbt->hdev;
 
 	hci_unregister_dev(hdev);
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	hci_free_dev(hdev);
 	vbt->hdev = NULL;

drivers/char/hw_random/virtio-rng.c

@@ -179,9 +179,9 @@ static void remove_common(struct virtio_device *vdev)
 	vi->data_avail = 0;
 	vi->data_idx = 0;
 	complete(&vi->have_data);
-	vdev->config->reset(vdev);
 	if (vi->hwrng_register_done)
 		hwrng_unregister(&vi->hwrng);
+	virtio_reset_device(vdev);
 	vdev->config->del_vqs(vdev);
 	ida_simple_remove(&rng_index_ida, vi->index);
 	kfree(vi);

drivers/char/virtio_console.c

@@ -1958,7 +1958,7 @@ static void virtcons_remove(struct virtio_device *vdev)
 	spin_unlock_irq(&pdrvdata_lock);
 
 	/* Disable interrupts for vqs */
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	/* Finish up work that's lined up */
 	if (use_multiport(portdev))
 		cancel_work_sync(&portdev->control_work);
@@ -2148,7 +2148,7 @@ static int virtcons_freeze(struct virtio_device *vdev)
 
 	portdev = vdev->priv;
 
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	if (use_multiport(portdev))
 		virtqueue_disable_cb(portdev->c_ivq);

drivers/crypto/virtio/virtio_crypto_core.c

@@ -404,7 +404,7 @@ static int virtcrypto_probe(struct virtio_device *vdev)
 free_engines:
 	virtcrypto_clear_crypto_engines(vcrypto);
 free_vqs:
-	vcrypto->vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	virtcrypto_del_vqs(vcrypto);
 free_dev:
 	virtcrypto_devmgr_rm_dev(vcrypto);
@@ -436,7 +436,7 @@ static void virtcrypto_remove(struct virtio_device *vdev)
 
 	if (virtcrypto_dev_started(vcrypto))
 		virtcrypto_dev_stop(vcrypto);
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	virtcrypto_free_unused_reqs(vcrypto);
 	virtcrypto_clear_crypto_engines(vcrypto);
 	virtcrypto_del_vqs(vcrypto);
@@ -456,7 +456,7 @@ static int virtcrypto_freeze(struct virtio_device *vdev)
 {
 	struct virtio_crypto *vcrypto = vdev->priv;
 
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	virtcrypto_free_unused_reqs(vcrypto);
 	if (virtcrypto_dev_started(vcrypto))
 		virtcrypto_dev_stop(vcrypto);
@@ -492,7 +492,7 @@ static int virtcrypto_restore(struct virtio_device *vdev)
 free_engines:
 	virtcrypto_clear_crypto_engines(vcrypto);
 free_vqs:
-	vcrypto->vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	virtcrypto_del_vqs(vcrypto);
 	return err;
 }

drivers/firmware/arm_scmi/virtio.c

@@ -452,7 +452,7 @@ static void scmi_vio_remove(struct virtio_device *vdev)
 	 * outstanding message on any vqueue to be ignored by complete_cb: now
 	 * we can just stop processing buffers and destroy the vqueues.
 	 */
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	vdev->config->del_vqs(vdev);
 	/* Ensure scmi_vdev is visible as NULL */
 	smp_store_mb(scmi_vdev, NULL);

drivers/gpio/gpio-virtio.c

@@ -450,7 +450,7 @@ static void virtio_gpio_request_vq(struct virtqueue *vq)
 
 static void virtio_gpio_free_vqs(struct virtio_device *vdev)
 {
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	vdev->config->del_vqs(vdev);
 }
 

drivers/gpu/drm/virtio/virtgpu_kms.c

@@ -279,7 +279,7 @@ void virtio_gpu_deinit(struct drm_device *dev)
 	flush_work(&vgdev->ctrlq.dequeue_work);
 	flush_work(&vgdev->cursorq.dequeue_work);
 	flush_work(&vgdev->config_changed_work);
-	vgdev->vdev->config->reset(vgdev->vdev);
+	virtio_reset_device(vgdev->vdev);
 	vgdev->vdev->config->del_vqs(vgdev->vdev);
 }
 

drivers/i2c/busses/i2c-virtio.c

@@ -165,7 +165,7 @@ err_free:
 
 static void virtio_i2c_del_vqs(struct virtio_device *vdev)
 {
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	vdev->config->del_vqs(vdev);
 }
 

drivers/iommu/virtio-iommu.c

@@ -1189,7 +1189,7 @@ static void viommu_remove(struct virtio_device *vdev)
 	iommu_device_unregister(&viommu->iommu);
 
 	/* Stop all virtqueues */
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	vdev->config->del_vqs(vdev);
 
 	dev_info(&vdev->dev, "device removed\n");

drivers/net/caif/caif_virtio.c

@@ -754,7 +754,7 @@ static void cfv_remove(struct virtio_device *vdev)
 	debugfs_remove_recursive(cfv->debugfs);
 
 	vringh_kiov_cleanup(&cfv->ctx.riov);
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	vdev->vringh_config->del_vrhs(cfv->vdev);
 	cfv->vr_rx = NULL;
 	vdev->config->del_vqs(cfv->vdev);

drivers/net/virtio_net.c

@@ -3312,7 +3312,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	return 0;
 
 free_unregister_netdev:
-	vi->vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	unregister_netdev(dev);
 free_failover:
@@ -3328,7 +3328,7 @@ free:
 
 static void remove_vq_common(struct virtnet_info *vi)
 {
-	vi->vdev->config->reset(vi->vdev);
+	virtio_reset_device(vi->vdev);
 
 	/* Free unused buffers in both send and recv, if any. */
 	free_unused_bufs(vi);

drivers/net/wireless/mac80211_hwsim.c

@@ -4498,7 +4498,7 @@ static void remove_vqs(struct virtio_device *vdev)
 {
 	int i;
 
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	for (i = 0; i < ARRAY_SIZE(hwsim_vqs); i++) {
 		struct virtqueue *vq = hwsim_vqs[i];

drivers/nvdimm/virtio_pmem.c

@@ -105,7 +105,7 @@ static void virtio_pmem_remove(struct virtio_device *vdev)
 
 	nvdimm_bus_unregister(nvdimm_bus);
 	vdev->config->del_vqs(vdev);
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 }
 
 static struct virtio_driver virtio_pmem_driver = {

drivers/rpmsg/virtio_rpmsg_bus.c

@@ -1024,7 +1024,7 @@ static void rpmsg_remove(struct virtio_device *vdev)
 	size_t total_buf_space = vrp->num_bufs * vrp->buf_size;
 	int ret;
 
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 
 	ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device);
 	if (ret)

drivers/scsi/virtio_scsi.c

@@ -778,7 +778,7 @@ static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq,
 static void virtscsi_remove_vqs(struct virtio_device *vdev)
 {
 	/* Stop all the virtqueues. */
-	vdev->config->reset(vdev);
+	virtio_reset_device(vdev);
 	vdev->config->del_vqs(vdev);
 }
 

drivers/vdpa/alibaba/eni_vdpa.c

@@ -58,7 +58,7 @@ static struct virtio_pci_legacy_device *vdpa_to_ldev(struct vdpa_device *vdpa)
 	return &eni_vdpa->ldev;
 }
 
-static u64 eni_vdpa_get_features(struct vdpa_device *vdpa)
+static u64 eni_vdpa_get_device_features(struct vdpa_device *vdpa)
 {
 	struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
 	u64 features = vp_legacy_get_features(ldev);
@@ -69,7 +69,7 @@ static u64 eni_vdpa_get_features(struct vdpa_device *vdpa)
 	return features;
 }
 
-static int eni_vdpa_set_features(struct vdpa_device *vdpa, u64 features)
+static int eni_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
 {
 	struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
 
@@ -84,6 +84,13 @@ static int eni_vdpa_set_features(struct vdpa_device *vdpa, u64 features)
 	return 0;
 }
 
+static u64 eni_vdpa_get_driver_features(struct vdpa_device *vdpa)
+{
+	struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
+
+	return vp_legacy_get_driver_features(ldev);
+}
+
 static u8 eni_vdpa_get_status(struct vdpa_device *vdpa)
 {
 	struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
@@ -401,8 +408,9 @@ static void eni_vdpa_set_config_cb(struct vdpa_device *vdpa,
 }
 
 static const struct vdpa_config_ops eni_vdpa_ops = {
-	.get_features	= eni_vdpa_get_features,
-	.set_features	= eni_vdpa_set_features,
+	.get_device_features = eni_vdpa_get_device_features,
+	.set_driver_features = eni_vdpa_set_driver_features,
+	.get_driver_features = eni_vdpa_get_driver_features,
 	.get_status	= eni_vdpa_get_status,
 	.set_status	= eni_vdpa_set_status,
 	.reset		= eni_vdpa_reset,
@@ -450,11 +458,6 @@ static u16 eni_vdpa_get_num_queues(struct eni_vdpa *eni_vdpa)
 	return num;
 }
 
-static void eni_vdpa_free_irq_vectors(void *data)
-{
-	pci_free_irq_vectors(data);
-}
-
 static int eni_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct device *dev = &pdev->dev;
@@ -488,13 +491,6 @@ static int eni_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	eni_vdpa->vdpa.dma_dev = &pdev->dev;
 	eni_vdpa->queues = eni_vdpa_get_num_queues(eni_vdpa);
 
-	ret = devm_add_action_or_reset(dev, eni_vdpa_free_irq_vectors, pdev);
-	if (ret) {
-		ENI_ERR(pdev,
-			"failed for adding devres for freeing irq vectors\n");
-		goto err;
-	}
-
 	eni_vdpa->vring = devm_kcalloc(&pdev->dev, eni_vdpa->queues,
 				      sizeof(*eni_vdpa->vring),
 				      GFP_KERNEL);