Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann: "A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne" * tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom arm: mach-spear: Add missing of_node_put() in time.c ARM: cns3xxx: Fix refcount leak in cns3xxx_init MAINTAINERS: Update email address arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region ARM: dts: bcm2711-rpi-400: Fix GPIO line names bus: bt1-axi: Don't print error on -EPROBE_DEFER bus: bt1-apb: Don't print error on -EPROBE_DEFER ARM: Fix refcount leak in axxia_boot_secondary ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity ARM: dts: imx6qdl: correct PU regulator ramp delay firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe MAINTAINERS: Update BCM2711/BCM2835 maintainer ...
2026-01-06 11:08:10 -08:00 · 2022-06-26 14:12:56 -07:00
parent 413c1f1491 7f05811287
commit 1709b88739
37 changed files with 205 additions and 193 deletions
--- a/9
+++ b/9
@@ -2469,6 +2469,7 @@ ARM/NXP S32G ARCHITECTURE
 M:	Chester Lin <clin@suse.com>
 R:	Andreas Färber <afaerber@suse.de>
 R:	Matthias Brugger <mbrugger@suse.com>
+R:	NXP S32 Linux Team <s32@nxp.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/freescale/s32g*.dts*
@@ -3812,12 +3813,12 @@ N:	bcmbca
 N:	bcm[9]?47622

 BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
-M:	Nicolas Saenz Julienne <nsaenz@kernel.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git
+T:	git git://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 F:	drivers/staging/vc04_services
@@ -16536,7 +16537,7 @@ F:	Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
 F:	drivers/cpufreq/qcom-cpufreq-nvmem.c

 QUALCOMM CRYPTO DRIVERS
-M:	Thara Gopinath <thara.gopinath@linaro.org>
+M:	Thara Gopinath <thara.gopinath@gmail.com>
 L:	linux-crypto@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -16647,7 +16648,7 @@ F:	include/linux/if_rmnet.h

 QUALCOMM TSENS THERMAL DRIVER
 M:	Amit Kucheria <amitk@kernel.org>
-M:	Thara Gopinath <thara.gopinath@linaro.org>
+M:	Thara Gopinath <thara.gopinath@gmail.com>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1586,7 +1586,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
-	aspeed-bmc-nuvia-dc-scm.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mihawk.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
@@ -1599,6 +1598,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
 	aspeed-bmc-quanta-q71l.dtb \
 	aspeed-bmc-quanta-s6q.dtb \
 	aspeed-bmc-supermicro-x11spi.dtb \
--- a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -6,8 +6,8 @@
 #include "aspeed-g6.dtsi"

 / {
-	model = "Nuvia DC-SCM BMC";
-	compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600";
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";

 	aliases {
 		serial4 = &uart5;
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -28,12 +28,12 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };

 &genet_mdio {
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -593,7 +593,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_atmel_conn>;
 		reg = <0x4a>;
-		reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
 		status = "disabled";
 	};
 };
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -762,7 +762,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -120,6 +120,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};

@@ -1153,7 +1154,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
--- a/arch/arm/boot/dts/stm32mp15-scmi.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-scmi.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	soc {
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+	};
+};
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -115,33 +115,6 @@
 		status = "disabled";
 	};

-	firmware {
-		optee: optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-			status = "disabled";
-		};
-
-		scmi: scmi {
-			compatible = "linaro,scmi-optee";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			linaro,optee-channel-id = <0>;
-			shmem = <&scmi_shm>;
-			status = "disabled";
-
-			scmi_clk: protocol@14 {
-				reg = <0x14>;
-				#clock-cells = <1>;
-			};
-
-			scmi_reset: protocol@16 {
-				reg = <0x16>;
-				#reset-cells = <1>;
-			};
-		};
-	};
-
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -149,20 +122,6 @@
 		interrupt-parent = <&intc>;
 		ranges;

-		scmi_sram: sram@2ffff000 {
-			compatible = "mmio-sram";
-			reg = <0x2ffff000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x2ffff000 0x1000>;
-
-			scmi_shm: scmi-sram@0 {
-				compatible = "arm,scmi-shmem";
-				reg = <0 0x80>;
-				status = "disabled";
-			};
-		};
-
 		timers2: timer@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
--- a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
@@ -54,10 +55,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -76,11 +73,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
@@ -63,10 +64,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -85,11 +82,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
@@ -59,10 +60,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -81,11 +78,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
@@ -68,10 +69,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -90,11 +87,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -ENOENT;

 	syscon = of_iomap(syscon_np, 0);
+	of_node_put(syscon_np);
 	if (!syscon)
 		return -ENOMEM;

--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -372,6 +372,7 @@ static void __init cns3xxx_init(void)
 		/* De-Asscer SATA Reset */
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
 	}
+	of_node_put(dn);

 	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
 	if (of_device_is_available(dn)) {
@@ -385,6 +386,7 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
+	of_node_put(dn);

 	pm_power_off = cns3xxx_power_off;

--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -149,6 +149,7 @@ static void exynos_map_pmu(void)
 	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
 	if (np)
 		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 }

 static void __init exynos_init_irq(void)
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -218,13 +218,13 @@ void __init spear_setup_of_timer(void)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: No irq passed for timer via DT\n", __func__);
-		return;
+		goto err_put_np;
 	}

 	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
 		pr_err("%s: of iomap failed\n", __func__);
-		return;
+		goto err_put_np;
 	}

 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -239,6 +239,8 @@ void __init spear_setup_of_timer(void)
 		goto err_prepare_enable_clk;
 	}

+	of_node_put(np);
+
 	spear_clockevent_init(irq);
 	spear_clocksource_init();

@@ -248,4 +250,6 @@ err_prepare_enable_clk:
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
+err_put_np:
+	of_node_put(np);
 }
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -280,8 +280,8 @@
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_bus>;
-			clocks = <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>,
-				 <&cmu_peri CLK_GOUT_UART0_PCLK>;
+			clocks = <&cmu_peri CLK_GOUT_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>;
 			clock-names = "uart", "clk_uart_baud0";
 			samsung,uart-fifosize = <64>;
 			status = "disabled";
@@ -293,8 +293,8 @@
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart1_bus>;
-			clocks = <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>,
-				 <&cmu_peri CLK_GOUT_UART1_PCLK>;
+			clocks = <&cmu_peri CLK_GOUT_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>;
 			clock-names = "uart", "clk_uart_baud0";
 			samsung,uart-fifosize = <256>;
 			status = "disabled";
@@ -306,8 +306,8 @@
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart2_bus>;
-			clocks = <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>,
-				 <&cmu_peri CLK_GOUT_UART2_PCLK>;
+			clocks = <&cmu_peri CLK_GOUT_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>;
 			clock-names = "uart", "clk_uart_baud0";
 			samsung,uart-fifosize = <256>;
 			status = "disabled";
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -79,7 +79,7 @@
 		};
 	};

-	soc {
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -456,13 +456,11 @@
 		clock-names = "clk_ahb", "clk_xin";
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
-		ti,otap-del-sel-hs400 = <0x4>;
 	};

 	sdhci1: mmc@fa00000 {
--- a/Show More
+++ b/Show More