Commit f0e386ee0c ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
Before the commit 896fbe20b4 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
kmsg_dump_get_buffer() uses @syslog to determine if the syslog
prefix should be written to the buffer. However, when calculating
the maximum number of records that can fit into the buffer, it
always counts the bytes from the syslog prefix.
Use @syslog when calculating the maximum number of records that can
fit into the buffer.
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de
Counting text lines in a record simply involves counting the number
of newline characters (+1). However, it is searching the full data
block for newline characters, even though the text data can be (and
often is) a subset of that area. Since the extra area in the data
block was never initialized, the result is that extra newlines may
be seen and counted.
Restrict newline searching to the text data length.
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113144234.6545-1-john.ogness@linutronix.de
Pull printk updates from Petr Mladek:
- Finally allow parallel writes and reads into/from the lockless
ringbuffer. But it is not a complete solution. Readers are still
serialized against each other. And nested writes are still prevented
by printk_safe per-CPU buffers.
- Use ttynull as the ultimate fallback for /dev/console.
- Officially allow disabling console output by using console="" or
console=null
- A few code cleanups
* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: remove logbuf_lock writer-protection of ringbuffer
printk: inline log_output(),log_store() in vprintk_store()
printk: remove obsolete dead assignment
printk/console: Allow to disable console output by using console="" or console=null
init/console: Use ttynull as a fallback when there is no console
printk: ringbuffer: Reference text_data_ring directly in callees.
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock writer-protection of
the ringbuffer. The reader-protection is not removed because some
variables, used by readers, are using @logbuf_lock for synchronization:
@syslog_seq, @syslog_time, @syslog_partial, @console_seq,
struct kmsg_dumper.
For PRINTK_NMI_DIRECT_CONTEXT_MASK, @logbuf_lock usage is not removed
because it may be used for dumper synchronization.
Without @logbuf_lock synchronization of vprintk_store() it is no
longer possible to use the single static buffer for temporarily
sprint'ing the message. Instead, use vsnprintf() to determine the
length and perform the real vscnprintf() using the area reserved from
the ringbuffer. This leads to suboptimal packing of the message data,
but will result in less wasted storage than multiple per-cpu buffers
to support lockless temporary sprint'ing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201209004453.17720-3-john.ogness@linutronix.de
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The commit 48021f9813 ("printk: handle blank console arguments
passed in.") prevented crash caused by empty console= parameter value.
Unfortunately, this value is widely used on Chromebooks to disable
the console output. The above commit caused performance regression
because the messages were pushed on slow console even though nobody
was watching it.
Use ttynull driver explicitly for console="" and console=null
parameters. It has been created for exactly this purpose.
It causes that preferred_console is set. As a result, ttySX and ttyX
are not used as a fallback. And only ttynull console gets registered by
default.
It still allows to register other consoles either by additional console=
parameters or SPCR. It prevents regression because it worked this way even
before. Also it is a sane semantic. Preventing output on all consoles
should be done another way, for example, by introducing mute_console
parameter.
Link: https://lore.kernel.org/r/20201006025935.GA597@jagdpanzerIV.localdomain
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201111135450.11214-3-pmladek@suse.com
A bunch of functions in the new ringbuffer code take both a
printk_ringbuffer struct and a separate prb_data_ring. This is a relic
from an earlier version of the code when a second data ring was present.
Since this is no longer the case remove the extra function argument
from:
- data_make_reusable()
- data_push_tail()
- data_alloc()
- data_realloc()
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
make clang-analyzer on x86_64 defconfig caught my attention with:
kernel/printk/printk_ringbuffer.c:885:3: warning:
Value stored to 'desc' is never read [clang-analyzer-deadcode.DeadStores]
desc = to_desc(desc_ring, head_id);
^
Commit b6cf8b3f33 ("printk: add lockless ringbuffer") introduced
desc_reserve() with this unneeded dead-store assignment.
As discussed with John Ogness privately, this is probably just some minor
left-over from previous iterations of the ringbuffer implementation. So,
simply remove this unneeded dead assignment to make clang-analyzer happy.
As compilers will detect this unneeded assignment and optimize this anyway,
the resulting object code is identical before and after this change.
No functional change. No change to object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201106034005.18822-1-lukas.bulwahn@gmail.com
Pull printk fix from Petr Mladek:
"Prevent overflow in the new lockless ringbuffer"
* tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: ringbuffer: Wrong data pointer when appending small string
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
