Theses are reported when using nixpkgs to build the kernel.
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Change-Id: I12350a9fb5626e42b02c0fbcedf3401ffaa24ca2
CIX ISP driver currently consumes mntn_public_interface.h, but lives
outside of the tree. Without those headers in the kernel header package,
dkms cannot build this module.
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Change-Id: Ifa3345164a9e3461a6fbb61f6f645c854e2184ce
commit 0d7597749f5a3ac67851d3836635d084df15fb66 upstream.
When KCOV or GCOV is enabled, dead code can be left behind, in which
case objtool silences unreachable and undefined behavior (fallthrough)
warnings.
Fallthrough warnings, and their variant "end of section" warnings, were
silenced with the following commit:
6b023c784204 ("objtool: Silence more KCOV warnings")
Another variant of a fallthrough warning is a jump to the end of a
function. If that function happens to be at the end of a section, the
jump destination doesn't actually exist.
Normally that would be a fatal objtool error, but for KCOV/GCOV it's
just another undefined behavior fallthrough. Silence it like the
others.
Fixes the following warning:
drivers/iommu/dma-iommu.o: warning: objtool: iommu_dma_sw_msi+0x92: can't find jump dest instruction at .text+0x54d5
Fixes: 6b023c784204 ("objtool: Silence more KCOV warnings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/08fbe7d7e1e20612206f1df253077b94f178d93e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/314f8809-cd59-479b-97d7-49356bf1c8d1@infradead.org/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26d7fb4fd4ca1180e2fa96587dea544563b4962a upstream.
Commit 62baf70c3274 caused the ANA log page to be re-read, even on
controllers that do not support ANA. While this should generally
harmless, some controllers hang on the unsupported log page and
never finish probing.
Fixes: 62baf70c3274 ("nvme: re-read ANA log page after ns scan completes")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Srikanth Aithal <sraithal@amd.com>
[hch: more detailed commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b73c3ccdca95c237750c981054997c71d33e09d7 upstream.
Commit e27fbe16af5c ("MIPS: cm: Detect CM quirks from device tree")
introduced
arch/mips/include/asm/mips-cm.h:119:13: error: ‘mips_cm_update_property’
defined but not used [-Werror=unused-function]
Fix this by making empty function implementation inline
Fixes: e27fbe16af5c ("MIPS: cm: Detect CM quirks from device tree")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44d9b3f584c59a606b521e7274e658d5b866c699 upstream.
When `jr3_pci_detach()` is called during device removal, it calls
`timer_delete_sync()` to stop the timer, but the timer expiry function
always reschedules the timer, so the synchronization is ineffective.
Call `timer_shutdown_sync()` instead. It does not matter that the timer
expiry function pointer is cleared, because the device is being removed.
Fixes: 07b509e658 ("Staging: comedi: add jr3_pci driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415123901.13483-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c2227656d9003f4d77afc76f34dd81b95e4c2c4 upstream.
vmxnet3 driver's XDP handling is buggy for packet sizes using ring0 (that
is, packet sizes between 128 - 3k bytes).
We noticed MTU-related connectivity issues with Cilium's service load-
balancing in case of vmxnet3 as NIC underneath. A simple curl to a HTTP
backend service where the XDP LB was doing IPIP encap led to overly large
packet sizes but only for *some* of the packets (e.g. HTTP GET request)
while others (e.g. the prior TCP 3WHS) looked completely fine on the wire.
In fact, the pcap recording on the backend node actually revealed that the
node with the XDP LB was leaking uninitialized kernel data onto the wire
for the affected packets, for example, while the packets should have been
152 bytes their actual size was 1482 bytes, so the remainder after 152 bytes
was padded with whatever other data was in that page at the time (e.g. we
saw user/payload data from prior processed packets).
We only noticed this through an MTU issue, e.g. when the XDP LB node and
the backend node both had the same MTU (e.g. 1500) then the curl request
got dropped on the backend node's NIC given the packet was too large even
though the IPIP-encapped packet normally would never even come close to
the MTU limit. Lowering the MTU on the XDP LB (e.g. 1480) allowed to let
the curl request succeed (which also indicates that the kernel ignored the
padding, and thus the issue wasn't very user-visible).
Commit e127ce7699c1 ("vmxnet3: Fix missing reserved tailroom") was too eager
to also switch xdp_prepare_buff() from rcd->len to rbi->len. It really needs
to stick to rcd->len which is the actual packet length from the descriptor.
The latter we also feed into vmxnet3_process_xdp_small(), by the way, and
it indicates the correct length needed to initialize the xdp->{data,data_end}
parts. For e127ce7699c1 ("vmxnet3: Fix missing reserved tailroom") the
relevant part was adapting xdp_init_buff() to address the warning given the
xdp_data_hard_end() depends on xdp->frame_sz. With that fixed, traffic on
the wire looks good again.
Fixes: e127ce7699c1 ("vmxnet3: Fix missing reserved tailroom")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Andrew Sauber <andrew.sauber@isovalent.com>
Cc: Anton Protopopov <aspsk@isovalent.com>
Cc: William Tu <witu@nvidia.com>
Cc: Martin Zaharinov <micron10@gmail.com>
Cc: Ronak Doshi <ronak.doshi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250423133600.176689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18daa52418e7e4629ed1703b64777294209d2622 upstream.
If userspace reads "uevent" device attribute at the same time as another
threads unbinds the device from its driver, change to dev->driver from a
valid pointer to NULL may result in crash. Fix this by using READ_ONCE()
when fetching the pointer, and take bus' drivers klist lock to make sure
driver instance will not disappear while we access it.
Use WRITE_ONCE() when setting the driver pointer to ensure there is no
tearing.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-3-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc1771f718548f7d4b93991b174c6e7b5e1ba410 upstream.
This reverts commit c0a40097f0bc81deafc15f9195d1fb54595cd6d0.
Probing a device can take arbitrary long time. In the field we observed
that, for example, probing a bad micro-SD cards in an external USB card
reader (or maybe cards were good but cables were flaky) sometimes takes
longer than 2 minutes due to multiple retries at various levels of the
stack. We can not block uevent_show() method for that long because udev
is reading that attribute very often and that blocks udev and interferes
with booting of the system.
The change that introduced locking was concerned with dev_uevent()
racing with unbinding the driver. However we can handle it without
locking (which will be done in subsequent patch).
There was also claim that synchronization with probe() is needed to
properly load USB drivers, however this is a red herring: the change
adding the lock was introduced in May of last year and USB loading and
probing worked properly for many years before that.
Revert the harmful locking.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-1-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8fbc0d9cab6c1ee6403f42c0991b0c1d5dbc092 upstream.
Calling C code via a different mapping than it was linked at is
problematic, because the compiler assumes that RIP-relative and absolute
symbol references are interchangeable. GCC in particular may use
RIP-relative per-CPU variable references even when not using -fpic.
So call xen_prepare_pvh() via its kernel virtual mapping on x86_64, so
that those RIP-relative references produce the correct values. This
matches the pre-existing behavior for i386, which also invokes
xen_prepare_pvh() via the kernel virtual mapping before invoking
startup_32 with paging disabled again.
Fixes: 7243b93345 ("xen/pvh: Bootstrap PVH guest")
Tested-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-ID: <20241009160438.3884381-8-ardb+git@google.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
[ Stable context update ]
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 951a04ab3a2db4029debfa48d380ef834b93207e ]
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c178d9e57c8fd4238ff77263b877f6f16182ba ]
During recovery/check operations, the process_checks function loops
through available disks to find a 'primary' source with successfully
read data.
If no suitable source disk is found after checking all possibilities,
the 'primary' index will reach conf->raid_disks * 2. Add an explicit
check for this condition after the loop. If no source disk was found,
print an error message and return early to prevent further processing
without a valid primary source.
Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b044614be12d78d3a93767708b8d02fb7dfa9b0 ]
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:
[ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[ 31.648153] Hardware name: linux,dummy-virt (DT)
[ 31.648970] Call trace:
[ 31.649345] show_stack+0x18/0x24 (C)
[ 31.650960] dump_stack_lvl+0x40/0x84
[ 31.651559] dump_stack+0x18/0x24
[ 31.652264] panic+0x138/0x3b4
[ 31.652812] __ktime_get_real_seconds+0x0/0x10
[ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[ 31.654388] init_module+0x24/0xff4 [test_ubsan]
[ 31.655077] do_one_initcall+0xd4/0x280
[ 31.655680] do_init_module+0x58/0x2b4
That happens because the test corrupts other data in the stack:
400: d5384108 mrs x8, sp_el0
404: f9426d08 ldr x8, [x8, #1240]
408: f85f83a9 ldur x9, [x29, #-8]
40c: eb09011f cmp x8, x9
410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any
As there is no guarantee the compiler will order the local variables
as declared in the module:
volatile char above[4] = { }; /* Protect surrounding memory. */
volatile int arr[4];
volatile char below[4] = { }; /* Protect surrounding memory. */
There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.
So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f4314e66ed8d40b2ee24185d1a06a07a512eb1 ]
On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:
1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
as 'ret' is always zero in this error path
These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c721fc093938745d116c3a21326a0ee03bb491 ]
Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:
dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
94451
This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
