Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller
2019-05-02 22:14:21 -04:00
167 changed files with 1378 additions and 730 deletions

View File

@@ -370,11 +370,15 @@ autosuspend the interface's device. When the usage counter is = 0
then the interface is considered to be idle, and the kernel may
autosuspend the device.
Drivers need not be concerned about balancing changes to the usage
counter; the USB core will undo any remaining "get"s when a driver
is unbound from its interface. As a corollary, drivers must not call
any of the ``usb_autopm_*`` functions after their ``disconnect``
routine has returned.
Drivers must be careful to balance their overall changes to the usage
counter. Unbalanced "get"s will remain in effect when a driver is
unbound from its interface, preventing the device from going into
runtime suspend should the interface be bound to a driver again. On
the other hand, drivers are allowed to achieve this balance by calling
the ``usb_autopm_*`` functions even after their ``disconnect`` routine
has returned -- say from within a work-queue routine -- provided they
retain an active reference to the interface (via ``usb_get_intf`` and
``usb_put_intf``).
Drivers using the async routines are responsible for their own
synchronization and mutual exclusion.

View File

@@ -1342,6 +1342,7 @@ tag - INTEGER
Default value is 0.
xfrm4_gc_thresh - INTEGER
(Obsolete since linux-4.14)
The threshold at which we will start garbage collecting for IPv4
destination cache entries. At twice this value the system will
refuse new allocations.
@@ -1950,6 +1951,7 @@ echo_ignore_anycast - BOOLEAN
Default: 0
xfrm6_gc_thresh - INTEGER
(Obsolete since linux-4.14)
The threshold at which we will start garbage collecting for IPv6
destination cache entries. At twice this value the system will
refuse new allocations.

View File

@@ -132,7 +132,7 @@ version that should be applied. If there is any doubt, the maintainer
will reply and ask what should be done.
Q: I made changes to only a few patches in a patch series should I resend only those changed?
--------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
A: No, please resend the entire patch series and make sure you do number your
patches such that it is clear this is the latest and greatest set of patches
that can be applied.

View File

@@ -866,14 +866,14 @@ The intent is that compaction has less work to do in the future and to
increase the success rate of future high-order allocations such as SLUB
allocations, THP and hugetlbfs pages.
To make it sensible with respect to the watermark_scale_factor parameter,
the unit is in fractions of 10,000. The default value of 15,000 means
that up to 150% of the high watermark will be reclaimed in the event of
a pageblock being mixed due to fragmentation. The level of reclaim is
determined by the number of fragmentation events that occurred in the
recent past. If this value is smaller than a pageblock then a pageblocks
worth of pages will be reclaimed (e.g. 2MB on 64-bit x86). A boost factor
of 0 will disable the feature.
To make it sensible with respect to the watermark_scale_factor
parameter, the unit is in fractions of 10,000. The default value of
15,000 on !DISCONTIGMEM configurations means that up to 150% of the high
watermark will be reclaimed in the event of a pageblock being mixed due
to fragmentation. The level of reclaim is determined by the number of
fragmentation events that occurred in the recent past. If this value is
smaller than a pageblock then a pageblocks worth of pages will be reclaimed
(e.g. 2MB on 64-bit x86). A boost factor of 0 will disable the feature.
=============================================================

View File

@@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 1
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION = -rc7
NAME = Shy Crocodile
# *DOCUMENTATION*
@@ -679,6 +679,7 @@ KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation)
KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += -Os
@@ -720,7 +721,6 @@ ifdef CONFIG_CC_IS_CLANG
KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
# Quiet clang warning: comparison of unsigned expression < 0 is always false
KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the

View File

@@ -18,8 +18,8 @@
model = "snps,hsdk";
compatible = "snps,hsdk";
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
chosen {
bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
@@ -105,7 +105,7 @@
#size-cells = <1>;
interrupt-parent = <&idu_intc>;
ranges = <0x00000000 0xf0000000 0x10000000>;
ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
cgu_rst: reset-controller@8a0 {
compatible = "snps,hsdk-reset";
@@ -269,9 +269,10 @@
};
memory@80000000 {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GiB */
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */
/* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */
};
};

View File

@@ -30,10 +30,10 @@
#else
.macro PREALLOC_INSTR
.macro PREALLOC_INSTR reg, off
.endm
.macro PREFETCHW_INSTR
.macro PREFETCHW_INSTR reg, off
.endm
#endif

View File

@@ -113,10 +113,24 @@ static void read_decode_cache_bcr_arcv2(int cpu)
}
READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
if (cbcr.c)
if (cbcr.c) {
ioc_exists = 1;
else
/*
* As for today we don't support both IOC and ZONE_HIGHMEM enabled
* simultaneously. This happens because as of today IOC aperture covers
* only ZONE_NORMAL (low mem) and any dma transactions outside this
* region won't be HW coherent.
* If we want to use both IOC and ZONE_HIGHMEM we can use
* bounce_buffer to handle dma transactions to HIGHMEM.
* Also it is possible to modify dma_direct cache ops or increase IOC
* aperture size if we are planning to use HIGHMEM without PAE.
*/
if (IS_ENABLED(CONFIG_HIGHMEM) || is_pae40_enabled())
ioc_enable = 0;
} else {
ioc_enable = 0;
}
/* HS 2.0 didn't have AUX_VOL */
if (cpuinfo_arc700[cpu].core.family > 0x51) {
@@ -1158,19 +1172,6 @@ noinline void __init arc_ioc_setup(void)
if (!ioc_enable)
return;
/*
* As for today we don't support both IOC and ZONE_HIGHMEM enabled
* simultaneously. This happens because as of today IOC aperture covers
* only ZONE_NORMAL (low mem) and any dma transactions outside this
* region won't be HW coherent.
* If we want to use both IOC and ZONE_HIGHMEM we can use
* bounce_buffer to handle dma transactions to HIGHMEM.
* Also it is possible to modify dma_direct cache ops or increase IOC
* aperture size if we are planning to use HIGHMEM without PAE.
*/
if (IS_ENABLED(CONFIG_HIGHMEM))
panic("IOC and HIGHMEM can't be used simultaneously");
/* Flush + invalidate + disable L1 dcache */
__dc_disable();

View File

@@ -73,7 +73,7 @@ config ARM
select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_EXIT_THREAD
select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL
select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
select HAVE_FUNCTION_TRACER if !XIP_KERNEL
select HAVE_GCC_PLUGINS
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)

View File

@@ -47,8 +47,8 @@ config DEBUG_WX
choice
prompt "Choose kernel unwinder"
default UNWINDER_ARM if AEABI && !FUNCTION_GRAPH_TRACER
default UNWINDER_FRAME_POINTER if !AEABI || FUNCTION_GRAPH_TRACER
default UNWINDER_ARM if AEABI
default UNWINDER_FRAME_POINTER if !AEABI
help
This determines which method will be used for unwinding kernel stack
traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
@@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER
config UNWINDER_ARM
bool "ARM EABI stack unwinder"
depends on AEABI
depends on AEABI && !FUNCTION_GRAPH_TRACER
select ARM_UNWIND
help
This option enables stack unwinding support in the kernel

View File

@@ -1438,7 +1438,21 @@ ENTRY(efi_stub_entry)
@ Preserve return value of efi_entry() in r4
mov r4, r0
bl cache_clean_flush
@ our cache maintenance code relies on CP15 barrier instructions
@ but since we arrived here with the MMU and caches configured
@ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
@ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
@ the enable path will be executed on v7+ only.
mrc p15, 0, r1, c1, c0, 0 @ read SCTLR
tst r1, #(1 << 5) @ CP15BEN bit set?
bne 0f
orr r1, r1, #(1 << 5) @ CP15 barrier instructions
mcr p15, 0, r1, c1, c0, 0 @ write SCTLR
ARM( .inst 0xf57ff06f @ v7+ isb )
THUMB( isb )
0: bl cache_clean_flush
bl cache_off
@ Set parameters for booting zImage according to boot protocol

View File

@@ -133,9 +133,9 @@ __secondary_data:
*/
.text
__after_proc_init:
#ifdef CONFIG_ARM_MPU
M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
#ifdef CONFIG_ARM_MPU
M_CLASS(ldr r3, [r12, 0x50])
AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0
and r3, r3, #(MMFR0_PMSA) @ PMSA field

View File

@@ -103,10 +103,15 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
* to be revisited if support for multiple ftrace entry points
* is added in the future, but for now, the pr_err() below
* deals with a theoretical issue only.
*
* Note that PLTs are place relative, and plt_entries_equal()
* checks whether they point to the same target. Here, we need
* to check if the actual opcodes are in fact identical,
* regardless of the offset in memory so use memcmp() instead.
*/
trampoline = get_plt_entry(addr, mod->arch.ftrace_trampoline);
if (!plt_entries_equal(mod->arch.ftrace_trampoline,
&trampoline)) {
if (memcmp(mod->arch.ftrace_trampoline, &trampoline,
sizeof(trampoline))) {
if (plt_entry_is_initialized(mod->arch.ftrace_trampoline)) {
pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n");
return -EINVAL;

View File

@@ -363,7 +363,7 @@ void __init arm64_memblock_init(void)
* Otherwise, this is a no-op
*/
u64 base = phys_initrd_start & PAGE_MASK;
u64 size = PAGE_ALIGN(phys_initrd_size);
u64 size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
/*
* We can only add back the initrd memory if we don't end up

View File

@@ -186,8 +186,9 @@ enum which_ebpf_reg {
* separate frame pointer, so BPF_REG_10 relative accesses are
* adjusted to be $sp relative.
*/
int ebpf_to_mips_reg(struct jit_ctx *ctx, const struct bpf_insn *insn,
enum which_ebpf_reg w)
static int ebpf_to_mips_reg(struct jit_ctx *ctx,
const struct bpf_insn *insn,
enum which_ebpf_reg w)
{
int ebpf_reg = (w == src_reg || w == src_reg_no_fp) ?
insn->src_reg : insn->dst_reg;

View File

@@ -266,6 +266,7 @@ CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_HUGETLBFS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y

View File

@@ -95,28 +95,15 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
unsigned long entries, unsigned long dev_hpa,
struct mm_iommu_table_group_mem_t **pmem)
{
struct mm_iommu_table_group_mem_t *mem;
long i, ret, locked_entries = 0;
struct mm_iommu_table_group_mem_t *mem, *mem2;
long i, ret, locked_entries = 0, pinned = 0;
unsigned int pageshift;
mutex_lock(&mem_list_mutex);
list_for_each_entry_rcu(mem, &mm->context.iommu_group_mem_list,
next) {
/* Overlap? */
if ((mem->ua < (ua + (entries << PAGE_SHIFT))) &&
(ua < (mem->ua +
(mem->entries << PAGE_SHIFT)))) {
ret = -EINVAL;
goto unlock_exit;
}
}
unsigned long entry, chunk;
if (dev_hpa == MM_IOMMU_TABLE_INVALID_HPA) {
ret = mm_iommu_adjust_locked_vm(mm, entries, true);
if (ret)
goto unlock_exit;
return ret;
locked_entries = entries;
}
@@ -148,17 +135,27 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
}
down_read(&mm->mmap_sem);
ret = get_user_pages_longterm(ua, entries, FOLL_WRITE, mem->hpages, NULL);
up_read(&mm->mmap_sem);
if (ret != entries) {
/* free the reference taken */
for (i = 0; i < ret; i++)
put_page(mem->hpages[i]);
chunk = (1UL << (PAGE_SHIFT + MAX_ORDER - 1)) /
sizeof(struct vm_area_struct *);
chunk = min(chunk, entries);
for (entry = 0; entry < entries; entry += chunk) {
unsigned long n = min(entries - entry, chunk);
vfree(mem->hpas);
kfree(mem);
ret = -EFAULT;
goto unlock_exit;
ret = get_user_pages_longterm(ua + (entry << PAGE_SHIFT), n,
FOLL_WRITE, mem->hpages + entry, NULL);
if (ret == n) {
pinned += n;
continue;
}
if (ret > 0)
pinned += ret;
break;
}
up_read(&mm->mmap_sem);
if (pinned != entries) {
if (!ret)
ret = -EFAULT;
goto free_exit;
}
pageshift = PAGE_SHIFT;
@@ -183,21 +180,43 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
}
good_exit:
ret = 0;
atomic64_set(&mem->mapped, 1);
mem->used = 1;
mem->ua = ua;
mem->entries = entries;
*pmem = mem;
mutex_lock(&mem_list_mutex);
list_for_each_entry_rcu(mem2, &mm->context.iommu_group_mem_list, next) {
/* Overlap? */
if ((mem2->ua < (ua + (entries << PAGE_SHIFT))) &&
(ua < (mem2->ua +
(mem2->entries << PAGE_SHIFT)))) {
ret = -EINVAL;
mutex_unlock(&mem_list_mutex);
goto free_exit;
}
}
list_add_rcu(&mem->next, &mm->context.iommu_group_mem_list);
unlock_exit:
if (locked_entries && ret)
mm_iommu_adjust_locked_vm(mm, locked_entries, false);
mutex_unlock(&mem_list_mutex);
*pmem = mem;
return 0;
free_exit:
/* free the reference taken */
for (i = 0; i < pinned; i++)
put_page(mem->hpages[i]);
vfree(mem->hpas);
kfree(mem);
unlock_exit:
mm_iommu_adjust_locked_vm(mm, locked_entries, false);
return ret;
}
@@ -266,7 +285,7 @@ static void mm_iommu_release(struct mm_iommu_table_group_mem_t *mem)
long mm_iommu_put(struct mm_struct *mm, struct mm_iommu_table_group_mem_t *mem)
{
long ret = 0;
unsigned long entries, dev_hpa;
unsigned long unlock_entries = 0;
mutex_lock(&mem_list_mutex);
@@ -287,17 +306,17 @@ long mm_iommu_put(struct mm_struct *mm, struct mm_iommu_table_group_mem_t *mem)
goto unlock_exit;
}
/* @mapped became 0 so now mappings are disabled, release the region */
entries = mem->entries;
dev_hpa = mem->dev_hpa;
mm_iommu_release(mem);
if (mem->dev_hpa == MM_IOMMU_TABLE_INVALID_HPA)
unlock_entries = mem->entries;
if (dev_hpa == MM_IOMMU_TABLE_INVALID_HPA)
mm_iommu_adjust_locked_vm(mm, entries, false);
/* @mapped became 0 so now mappings are disabled, release the region */
mm_iommu_release(mem);
unlock_exit:
mutex_unlock(&mem_list_mutex);
mm_iommu_adjust_locked_vm(mm, unlock_entries, false);
return ret;
}
EXPORT_SYMBOL_GPL(mm_iommu_put);

View File

@@ -324,7 +324,7 @@ config ARCH_ENABLE_SPLIT_PMD_PTLOCK
config PPC_RADIX_MMU
bool "Radix MMU Support"
depends on PPC_BOOK3S_64
depends on PPC_BOOK3S_64 && HUGETLB_PAGE
select ARCH_HAS_GIGANTIC_PAGE if (MEMORY_ISOLATION && COMPACTION) || CMA
default y
help

View File

@@ -352,7 +352,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
boot_params->hdr.loadflags &= ~KASLR_FLAG;
/* Save RSDP address for later use. */
boot_params->acpi_rsdp_addr = get_rsdp_addr();
/* boot_params->acpi_rsdp_addr = get_rsdp_addr(); */
sanitize_boot_params(boot_params);

View File

@@ -29,12 +29,12 @@ extern int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz);
extern time_t __vdso_time(time_t *t);
#ifdef CONFIG_PARAVIRT_CLOCK
extern u8 pvclock_page
extern u8 pvclock_page[PAGE_SIZE]
__attribute__((visibility("hidden")));
#endif
#ifdef CONFIG_HYPERV_TSCPAGE
extern u8 hvclock_page
extern u8 hvclock_page[PAGE_SIZE]
__attribute__((visibility("hidden")));
#endif

Some files were not shown because too many files have changed in this diff Show More