Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "These were the main changes in this cycle:

   - More -rt motivated separation of CONFIG_PREEMPT and
     CONFIG_PREEMPTION.

   - Add more low level scheduling topology sanity checks and warnings
     to filter out nonsensical topologies that break scheduling.

   - Extend uclamp constraints to influence wakeup CPU placement

   - Make the RT scheduler more aware of asymmetric topologies and CPU
     capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y

   - Make idle CPU selection more consistent

   - Various fixes, smaller cleanups, updates and enhancements - please
     see the git log for details"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  sched/fair: Define sched_idle_cpu() only for SMP configurations
  sched/topology: Assert non-NUMA topology masks don't (partially) overlap
  idle: fix spelling mistake "iterrupts" -> "interrupts"
  sched/fair: Remove redundant call to cpufreq_update_util()
  sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
  sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
  sched/fair: calculate delta runnable load only when it's needed
  sched/cputime: move rq parameter in irqtime_account_process_tick
  stop_machine: Make stop_cpus() static
  sched/debug: Reset watchdog on all CPUs while processing sysrq-t
  sched/core: Fix size of rq::uclamp initialization
  sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
  sched/fair: Load balance aggressively for SCHED_IDLE CPUs
  sched/fair : Improve update_sd_pick_busiest for spare capacity case
  watchdog: Remove soft_lockup_hrtimer_cnt and related code
  sched/rt: Make RT capacity-aware
  sched/fair: Make EAS wakeup placement consider uclamp restrictions
  sched/fair: Make task_fits_capacity() consider uclamp restrictions
  sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
  sched/uclamp: Make uclamp util helpers use and return UL values
  ...

arch/arc/kernel/entry.S

@@ -337,11 +337,11 @@ resume_user_mode_begin:
 resume_kernel_mode:
 
 	; Disable Interrupts from this point on
-	; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
-	; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
+	; CONFIG_PREEMPTION: This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPTION: To ensure restore_regs is intr safe
 	IRQ_DISABLE	r9
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 
 	; Can't preempt if preemption disabled
 	GET_CURR_THR_INFO_FROM_SP   r10

arch/arm/include/asm/switch_to.h

@@ -10,7 +10,7 @@
  * to ensure that the maintenance completes in case we migrate to another
  * CPU.
  */
-#if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP) && defined(CONFIG_CPU_V7)
+#if defined(CONFIG_PREEMPTION) && defined(CONFIG_SMP) && defined(CONFIG_CPU_V7)
 #define __complete_pending_tlbi()	dsb(ish)
 #else
 #define __complete_pending_tlbi()

arch/arm/kernel/entry-armv.S

@@ -211,7 +211,7 @@ __irq_svc:
 	svc_entry
 	irq_handler
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
 	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
 	teq	r8, #0				@ if preempt count != 0
@@ -226,7 +226,7 @@ ENDPROC(__irq_svc)
 
 	.ltorg
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 svc_preempt:
 	mov	r8, lr
 1:	bl	preempt_schedule_irq		@ irq en/disable is done inside

arch/arm/kernel/traps.c

@@ -248,6 +248,8 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 
 #ifdef CONFIG_PREEMPT
 #define S_PREEMPT " PREEMPT"
+#elif defined(CONFIG_PREEMPT_RT)
+#define S_PREEMPT " PREEMPT_RT"
 #else
 #define S_PREEMPT ""
 #endif

arch/arm/mm/cache-v7.S

@@ -135,13 +135,13 @@ flush_levels:
 	and	r1, r1, #7			@ mask of the bits for current cache only
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr
 	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	restore_irqs_notrace r9
 #endif
 	and	r2, r1, #7			@ extract the length of the cache lines

arch/arm/mm/cache-v7m.S

@@ -183,13 +183,13 @@ flush_levels:
 	and	r1, r1, #7			@ mask of the bits for current cache only
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	write_csselr r10, r1			@ set current cache level
 	isb					@ isb to sych the new cssr&csidr
 	read_ccsidr r1				@ read the new csidr
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	restore_irqs_notrace r9
 #endif
 	and	r2, r1, #7			@ extract the length of the cache lines

arch/arm64/Kconfig

@@ -34,32 +34,32 @@ config ARM64
 	select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
-	select ARCH_INLINE_READ_LOCK if !PREEMPT
-	select ARCH_INLINE_READ_LOCK_BH if !PREEMPT
-	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPT
-	select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPT
-	select ARCH_INLINE_READ_UNLOCK if !PREEMPT
-	select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPT
-	select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPT
-	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPT
-	select ARCH_INLINE_WRITE_LOCK if !PREEMPT
-	select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPT
-	select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPT
-	select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPT
-	select ARCH_INLINE_WRITE_UNLOCK if !PREEMPT
-	select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPT
-	select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPT
-	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPT
-	select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPT
-	select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPT
-	select ARCH_INLINE_SPIN_LOCK if !PREEMPT
-	select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPT
-	select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPT
-	select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPT
-	select ARCH_INLINE_SPIN_UNLOCK if !PREEMPT
-	select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPT
-	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPT
-	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPT
+	select ARCH_INLINE_READ_LOCK if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
 	select ARCH_KEEP_MEMBLOCK
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_QUEUED_RWLOCKS

arch/arm64/crypto/sha256-glue.c

@@ -97,7 +97,7 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
 		 * input when running on a preemptible kernel, but process the
 		 * data block by block instead.
 		 */
-		if (IS_ENABLED(CONFIG_PREEMPT) &&
+		if (IS_ENABLED(CONFIG_PREEMPTION) &&
 		    chunk + sctx->count % SHA256_BLOCK_SIZE > SHA256_BLOCK_SIZE)
 			chunk = SHA256_BLOCK_SIZE -
 				sctx->count % SHA256_BLOCK_SIZE;

arch/arm64/include/asm/assembler.h

@@ -675,8 +675,8 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
  * where <label> is optional, and marks the point where execution will resume
  * after a yield has been performed. If omitted, execution resumes right after
  * the endif_yield_neon invocation. Note that the entire sequence, including
- * the provided patchup code, will be omitted from the image if CONFIG_PREEMPT
- * is not defined.
+ * the provided patchup code, will be omitted from the image if
+ * CONFIG_PREEMPTION is not defined.
  *
  * As a convenience, in the case where no patchup code is required, the above
  * sequence may be abbreviated to
@@ -704,7 +704,7 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
 	.endm
 
 	.macro		if_will_cond_yield_neon
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	get_current_task	x0
 	ldr		x0, [x0, #TSK_TI_PREEMPT]
 	sub		x0, x0, #PREEMPT_DISABLE_OFFSET

arch/arm64/include/asm/preempt.h

@@ -79,11 +79,11 @@ static inline bool should_resched(int preempt_offset)
 	return pc == preempt_offset;
 }
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 void preempt_schedule(void);
 #define __preempt_schedule() preempt_schedule()
 void preempt_schedule_notrace(void);
 #define __preempt_schedule_notrace() preempt_schedule_notrace()
-#endif /* CONFIG_PREEMPT */
+#endif /* CONFIG_PREEMPTION */
 
 #endif /* __ASM_PREEMPT_H */

arch/arm64/kernel/entry.S

@@ -602,7 +602,7 @@ el1_irq:
 
 	irq_handler
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	ldr	x24, [tsk, #TSK_TI_PREEMPT]	// get preempt count
 alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	/*

arch/arm64/kernel/traps.c

@@ -144,9 +144,12 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 
 #ifdef CONFIG_PREEMPT
 #define S_PREEMPT " PREEMPT"
+#elif defined(CONFIG_PREEMPT_RT)
+#define S_PREEMPT " PREEMPT_RT"
 #else
 #define S_PREEMPT ""
 #endif
+
 #define S_SMP " SMP"
 
 static int __die(const char *str, int err, struct pt_regs *regs)

arch/c6x/kernel/entry.S

@@ -18,7 +18,7 @@
 #define DP	B14
 #define SP	B15
 
-#ifndef CONFIG_PREEMPT
+#ifndef CONFIG_PREEMPTION
 #define resume_kernel restore_all
 #endif
 
@@ -287,7 +287,7 @@ work_notifysig:
 	;; is a little bit different
 	;;
 ENTRY(ret_from_exception)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	MASK_INT B2
 #endif
 
@@ -557,7 +557,7 @@ ENDPROC(_nmi_handler)
 	;;
 	;; Jump to schedule() then return to ret_from_isr
 	;;
-#ifdef	CONFIG_PREEMPT
+#ifdef	CONFIG_PREEMPTION
 resume_kernel:
 	GET_THREAD_INFO A12
 	LDW	.D1T1	*+A12(THREAD_INFO_PREEMPT_COUNT),A1
@@ -582,7 +582,7 @@ preempt_schedule:
 	B	.S2	preempt_schedule_irq
 #endif
 	ADDKPC	.S2	preempt_schedule,B3,4
-#endif /* CONFIG_PREEMPT */
+#endif /* CONFIG_PREEMPTION */
 
 ENTRY(enable_exception)
 	DINT

arch/csky/kernel/entry.S

@@ -277,7 +277,7 @@ ENTRY(csky_irq)
 	zero_fp
 	psrset	ee
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	mov	r9, sp			/* Get current stack  pointer */
 	bmaski	r10, THREAD_SHIFT
 	andn	r9, r10			/* Get thread_info */
@@ -294,7 +294,7 @@ ENTRY(csky_irq)
 	mov	a0, sp
 	jbsr	csky_do_IRQ
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	subi	r12, 1
 	stw	r12, (r9, TINFO_PREEMPT)
 	cmpnei	r12, 0

arch/h8300/kernel/entry.S

@@ -284,12 +284,12 @@ badsys:
 	mov.l	er0,@(LER0:16,sp)
 	bra	resume_userspace
 
-#if !defined(CONFIG_PREEMPT)
+#if !defined(CONFIG_PREEMPTION)
 #define resume_kernel restore_all
 #endif
 
 ret_from_exception:
-#if defined(CONFIG_PREEMPT)
+#if defined(CONFIG_PREEMPTION)
 	orc	#0xc0,ccr
 #endif
 ret_from_interrupt:
@@ -319,7 +319,7 @@ work_resched:
 restore_all:
 	RESTORE_ALL			/* Does RTE */
 
-#if defined(CONFIG_PREEMPT)
+#if defined(CONFIG_PREEMPTION)
 resume_kernel:
 	mov.l	@(TI_PRE_COUNT:16,er4),er0
 	bne	restore_all:8

arch/hexagon/kernel/vm_entry.S

@@ -265,12 +265,12 @@ event_dispatch:
 	 * should be in the designated register (usually R19)
 	 *
 	 * If we were in kernel mode, we don't need to check scheduler
-	 * or signals if CONFIG_PREEMPT is not set.  If set, then it has
+	 * or signals if CONFIG_PREEMPTION is not set.  If set, then it has
 	 * to jump to a need_resched kind of block.
-	 * BTW, CONFIG_PREEMPT is not supported yet.
+	 * BTW, CONFIG_PREEMPTION is not supported yet.
 	 */
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	R0 = #VM_INT_DISABLE
 	trap1(#HVM_TRAP1_VMSETIE)
 #endif

arch/ia64/kernel/entry.S

@@ -670,12 +670,12 @@ GLOBAL_ENTRY(ia64_leave_syscall)
 	 *
 	 * p6 controls whether current_thread_info()->flags needs to be check for
 	 * extra work.  We always check for extra work when returning to user-level.
-	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
+	 * With CONFIG_PREEMPTION, we also check for extra work when the preempt_count
 	 * is 0.  After extra work processing has been completed, execution
 	 * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
 	 * needs to be redone.
 	 */
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	RSM_PSR_I(p0, r2, r18)			// disable interrupts
 	cmp.eq pLvSys,p0=r0,r0			// pLvSys=1: leave from syscall
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
@@ -685,7 +685,7 @@ GLOBAL_ENTRY(ia64_leave_syscall)
 (pUStk)	mov r21=0			// r21 <- 0
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
-#else /* !CONFIG_PREEMPT */
+#else /* !CONFIG_PREEMPTION */
 	RSM_PSR_I(pUStk, r2, r18)
 	cmp.eq pLvSys,p0=r0,r0		// pLvSys=1: leave from syscall
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
@@ -814,12 +814,12 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 *
 	 * p6 controls whether current_thread_info()->flags needs to be check for
 	 * extra work.  We always check for extra work when returning to user-level.
-	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
+	 * With CONFIG_PREEMPTION, we also check for extra work when the preempt_count
 	 * is 0.  After extra work processing has been completed, execution
 	 * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
 	 * needs to be redone.
 	 */
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	RSM_PSR_I(p0, r17, r31)			// disable interrupts
 	cmp.eq p0,pLvSys=r0,r0			// pLvSys=0: leave from kernel
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
@@ -1120,7 +1120,7 @@ skip_rbs_switch:
 
 	/*
 	 * On entry:
-	 *	r20 = &current->thread_info->pre_count (if CONFIG_PREEMPT)
+	 *	r20 = &current->thread_info->pre_count (if CONFIG_PREEMPTION)
 	 *	r31 = current->thread_info->flags
 	 * On exit:
 	 *	p6 = TRUE if work-pending-check needs to be redone

arch/ia64/kernel/kprobes.c

@@ -841,7 +841,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 		return 1;
 	}
 
-#if !defined(CONFIG_PREEMPT)
+#if !defined(CONFIG_PREEMPTION)
 	if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
 		/* Boost up -- we can execute copied instructions directly */
 		ia64_psr(regs)->ri = p->ainsn.slot;

arch/microblaze/kernel/entry.S

@@ -728,7 +728,7 @@ no_intr_resched:
 	bri	6f;
 /* MS: Return to kernel state. */
 2:
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	/* MS: get preempt_count from thread info */
 	lwi	r5, r11, TI_PREEMPT_COUNT;

arch/mips/include/asm/asmmacro.h

@@ -63,7 +63,7 @@
 	.endm
 
 	.macro	local_irq_disable reg=t0
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	lw      \reg, TI_PRE_COUNT($28)
 	addi    \reg, \reg, 1
 	sw      \reg, TI_PRE_COUNT($28)
@@ -73,7 +73,7 @@
 	xori	\reg, \reg, 1
 	mtc0	\reg, CP0_STATUS
 	irq_disable_hazard
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 	lw      \reg, TI_PRE_COUNT($28)
 	addi    \reg, \reg, -1
 	sw      \reg, TI_PRE_COUNT($28)