Merge tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly minor cleanups and bugfixes that address harmless
  problems.

  The largest branch is a conversion of the omap platform to use GPIO
  descriptors throughout the tree, for any devices that are not fully
  converted to devicetree.

  The Samsung Exynos platform gains back support for the Exynos4212 chip
  that was previously unused and removed but is now used for the Samsung
  Galaxy Tab3"

* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: omap2: Fix copy/paste bug
  MAINTAINERS: Replace my email address
  Input: ads7846 - fix pointer cast warning
  Input: ads7846 - Fix usage of match data
  ARM: omap2: Fix checkpatch issues
  arm: omap1: replace printk() with pr_err macro
  ARM: omap: Fix checkpatch issues
  ARM: s3c: Switch i2c drivers back to use .probe()
  ARM: versatile: mark mmc_status() static
  ARM: spear: include "pl080.h" for pl080_get_signal() prototype
  ARM: sa1100: address missing prototype warnings
  ARM: pxa: fix missing-prototypes warnings
  ARM: orion5x: fix d2net gpio initialization
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: omap1: add missing include
  ARM: lpc32xx: add missing include
  ARM: imx: add missing include
  ARM: highbank: add missing include
  ARM: ep93xx: fix missing-prototype warnings
  ARM: davinci: fix davinci_cpufreq_init() declaration
  ...

MAINTAINERS

@@ -3893,7 +3893,7 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/b44.*
 
 BROADCOM B53/SF2 ETHERNET SWITCH DRIVER
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 L:	netdev@vger.kernel.org
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)
 S:	Supported
@@ -3904,7 +3904,7 @@ F:	include/linux/dsa/brcm.h
 F:	include/linux/platform_data/b53.h
 
 BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -3918,7 +3918,7 @@ N:	bcm283*
 N:	raspberrypi
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
@@ -3957,7 +3957,7 @@ F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
 F:	drivers/pinctrl/bcm/pinctrl-bcm4908.c
 
 BROADCOM BCM5301X ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
@@ -3970,7 +3970,7 @@ F:	arch/arm/boot/dts/broadcom/bcm953012*
 F:	arch/arm/mach-bcm/bcm_5301x.c
 
 BROADCOM BCM53573 ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -3985,7 +3985,7 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -4005,7 +4005,7 @@ BROADCOM BCMBCA ARM ARCHITECTURE
 M:	William Zhang <william.zhang@broadcom.com>
 M:	Anand Gore <anand.gore@broadcom.com>
 M:	Kursad Oney <kursad.oney@broadcom.com>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -4030,7 +4030,7 @@ N:	bcm[9]?6858
 N:	bcm[9]?6878
 
 BROADCOM BDC DRIVER
-M:	Justin Chen <justinpopo6@gmail.com>
+M:	Justin Chen <justin.chen@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-usb@vger.kernel.org
@@ -4046,7 +4046,7 @@ S:	Maintained
 F:	drivers/cpufreq/bmips-cpufreq.c
 
 BROADCOM BMIPS MIPS ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
@@ -4114,14 +4114,14 @@ F:	drivers/net/wireless/broadcom/brcm80211/
 
 BROADCOM BRCMSTB GPIO DRIVER
 M:	Doug Berger <opendmb@gmail.com>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
 F:	drivers/gpio/gpio-brcmstb.c
 
 BROADCOM BRCMSTB I2C DRIVER
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
@@ -4137,7 +4137,7 @@ F:	Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
 F:	drivers/tty/serial/8250/8250_bcm7271.c
 
 BROADCOM BRCMSTB USB EHCI DRIVER
-M:	Justin Chen <justinpopo6@gmail.com>
+M:	Justin Chen <justin.chen@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-usb@vger.kernel.org
@@ -4154,7 +4154,7 @@ F:	Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
 F:	drivers/usb/misc/brcmstb-usb-pinmap.c
 
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
-M:	Justin Chen <justinpopo6@gmail.com>
+M:	Justin Chen <justin.chen@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-kernel@vger.kernel.org
@@ -4173,7 +4173,7 @@ F:	drivers/spi/spi-bcm63xx-hsspi.c
 F:	drivers/spi/spi-bcmbca-hsspi.c
 
 BROADCOM ETHERNET PHY DRIVERS
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4184,7 +4184,7 @@ F:	include/linux/brcmphy.h
 
 BROADCOM GENET ETHERNET DRIVER
 M:	Doug Berger <opendmb@gmail.com>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4268,7 +4268,7 @@ F:	drivers/firmware/broadcom/*
 
 BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
 M:	Rafał Miłecki <rafal@milecki.pl>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
@@ -4284,7 +4284,7 @@ F:	drivers/bcma/
 F:	include/linux/bcma/
 
 BROADCOM SPI DRIVER
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -4318,7 +4318,7 @@ F:	drivers/memory/brcmstb_dpfe.c
 
 BROADCOM STB NAND FLASH DRIVER
 M:	Brian Norris <computersforpeace@gmail.com>
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
@@ -4328,7 +4328,7 @@ F:	include/linux/platform_data/brcmnand.h
 BROADCOM STB PCIE DRIVER
 M:	Jim Quinlan <jim2101024@gmail.com>
 M:	Nicolas Saenz Julienne <nsaenz@kernel.org>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
@@ -4336,7 +4336,7 @@ F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 
 BROADCOM SYSTEMPORT ETHERNET DRIVER
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -19032,7 +19032,7 @@ K:	\bsecure_computing
 K:	\bTIF_SECCOMP\b
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mmc@vger.kernel.org

arch/arm/common/sa1111.c

@@ -695,7 +695,7 @@ static u32 sa1111_dma_mask[] = {
 /*
  * Configure the SA1111 shared memory controller.
  */
-void
+static void
 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 		     unsigned int cas_latency)
 {

arch/arm/mach-davinci/common.c

@@ -11,6 +11,7 @@
 #include <linux/etherdevice.h>
 #include <linux/davinci_emac.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/davinci-cpufreq.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>

arch/arm/mach-davinci/common.h

@@ -55,12 +55,6 @@ extern void davinci_common_init(const struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
 void davinci_init_late(void);
 
-#ifdef CONFIG_CPU_FREQ
-int davinci_cpufreq_init(void);
-#else
-static inline int davinci_cpufreq_init(void) { return 0; }
-#endif
-
 #ifdef CONFIG_SUSPEND
 int davinci_pm_init(void);
 #else

arch/arm/mach-ep93xx/timer-ep93xx.c

@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <asm/mach/time.h>
 #include "soc.h"
+#include "platform.h"
 
 /*************************************************************************
  * Timer handling for EP93xx
@@ -60,7 +61,7 @@ static u64 notrace ep93xx_read_sched_clock(void)
 	return ret;
 }
 
-u64 ep93xx_clocksource_read(struct clocksource *c)
+static u64 ep93xx_clocksource_read(struct clocksource *c)
 {
 	u64 ret;
 

arch/arm/mach-exynos/Kconfig

@@ -78,6 +78,11 @@ config CPU_EXYNOS4210
 	default y
 	depends on ARCH_EXYNOS4
 
+config SOC_EXYNOS4212
+	bool "Samsung Exynos4212"
+	default y
+	depends on ARCH_EXYNOS4
+
 config SOC_EXYNOS4412
 	bool "Samsung Exynos4412"
 	default y

arch/arm/mach-exynos/common.h

@@ -15,6 +15,7 @@
 #define EXYNOS3_SOC_MASK	0xFFFFF000
 
 #define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
 #define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
@@ -34,6 +35,7 @@ static inline int is_samsung_##name(void)	\
 
 IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@@ -52,6 +54,12 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS4412)
 # define soc_is_exynos4412()	is_samsung_exynos4412()
 #else

arch/arm/mach-exynos/exynos.c

@@ -180,6 +180,7 @@ static void __init exynos_dt_machine_init(void)
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos4212") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&
 	     (of_machine_is_compatible("samsung,trats2") ||
 		  of_machine_is_compatible("samsung,midas") ||
@@ -194,6 +195,7 @@ static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos3250",
 	"samsung,exynos4",
 	"samsung,exynos4210",
+	"samsung,exynos4212",
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",

arch/arm/mach-exynos/firmware.c

@@ -63,12 +63,18 @@ static int exynos_cpu_boot(int cpu)
 	 *
 	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (!soc_is_exynos4210() && !soc_is_exynos4412())
+	if (!soc_is_exynos4210() && !soc_is_exynos4212() &&
+	    !soc_is_exynos4412())
 		return 0;
 
 	/*
 	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
 	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }

arch/arm/mach-exynos/pm.c

@@ -161,7 +161,7 @@ void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
-	if (soc_is_exynos4412()) {
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		/* Setting SEQ_OPTION register */
 		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
 			       S5P_CENTRAL_SEQ_OPTION);

arch/arm/mach-exynos/suspend.c

@@ -231,6 +231,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
+EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@@ -640,6 +641,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4_pm_data,
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = &exynos4_pm_data,

arch/arm/mach-highbank/pm.c

@@ -12,6 +12,8 @@
 
 #include <uapi/linux/psci.h>
 
+#include "core.h"
+
 #define HIGHBANK_SUSPEND_PARAM \
 	((0 << PSCI_0_2_POWER_STATE_ID_SHIFT) | \
 	 (1 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | \

arch/arm/mach-imx/pm-imx25.c

@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
+#include "common.h"
 
 static int imx25_suspend_enter(suspend_state_t state)
 {

arch/arm/mach-lpc32xx/serial.c

@@ -15,6 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 #include "lpc32xx.h"
 #include "common.h"

arch/arm/mach-omap1/pm.c

@@ -632,7 +632,7 @@ static int __init omap_pm_init(void)
 
 	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 	if (error)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
+		pr_err("sysfs_create_file failed: %d\n", error);
 
 	if (cpu_is_omap16xx()) {
 		/* configure LOW_PWR pin */

arch/arm/mach-omap1/serial.c

@@ -20,6 +20,7 @@
 
 #include <asm/mach-types.h>
 
+#include "common.h"
 #include "serial.h"
 #include "mux.h"
 #include "pm.h"

arch/arm/mach-omap1/sram-init.c

@@ -23,7 +23,7 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define SRAM_BOOTLOADER_SZ	0x80
-#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+#define ROUND_DOWN(value, boundary)	((value) & (~((boundary) - 1)))
 
 static void __iomem *omap_sram_base;
 static unsigned long omap_sram_start;

arch/arm/mach-omap2/board-generic.c

@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap2/board-n8x0.c

@@ -158,7 +158,7 @@ static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
 				"vsd", 1, GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VIO power, GPIO 9 */
 		GPIO_LOOKUP_IDX("gpio-0-15", 9,
-				"vsd", 1, GPIO_ACTIVE_HIGH),
+				"vio", 1, GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -374,6 +374,7 @@ static void irq_restore_context(void)
 static void irq_save_secure_context(void)
 {
 	u32 ret;
+
 	ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
 				FLAG_START_CRITICAL,
 				0, 0, 0, 0, 0);