Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "26 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
  userfaultfd: remove wrong comment from userfaultfd_ctx_get()
  fat: fix using uninitialized fields of fat_inode/fsinfo_inode
  sh: cayman: IDE support fix
  kasan: fix races in quarantine_remove_cache()
  kasan: resched in quarantine_remove_cache()
  mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
  thp: fix another corner case of munlock() vs. THPs
  rmap: fix NULL-pointer dereference on THP munlocking
  mm/memblock.c: fix memblock_next_valid_pfn()
  userfaultfd: selftest: vm: allow to build in vm/ directory
  userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED
  userfaultfd: non-cooperative: fix fork fctx->new memleak
  mm/cgroup: avoid panic when init with low memory
  drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
  mm/vmstats: add thp_split_pud event for clarity
  include/linux/fs.h: fix unsigned enum warning with gcc-4.2
  userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete
  userfaultfd: non-cooperative: robustness check
  userfaultfd: non-cooperative: rollback userfaultfd_exit
  x86, mm: unify exit paths in gup_pte_range()
  ...

Documentation/dev-tools/kcov.rst

@@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims
 to collect more or less stable coverage that is function of syscall inputs.
 To achieve this goal it does not collect coverage in soft/hard interrupts
 and instrumentation of some inherently non-deterministic parts of kernel is
-disbled (e.g. scheduler, locking).
+disabled (e.g. scheduler, locking).
 
 Usage
 -----

Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt

@@ -45,7 +45,7 @@ Required Properties:
 Optional Properties:
 - reg-names: In addition to the required properties, the following are optional
   - "efuse-address"	- Contains efuse base address used to pick up ABB info.
-  - "ldo-address"	- Contains address of ABB LDO overide register address.
+  - "ldo-address"	- Contains address of ABB LDO override register.
 	"efuse-address" is required for this.
 - ti,ldovbb-vset-mask	- Required if ldo-address is set, mask for LDO override
 	register to provide override vset value.

Documentation/vm/userfaultfd.txt

@@ -172,10 +172,6 @@ the same read(2) protocol as for the page fault notifications. The
 manager has to explicitly enable these events by setting appropriate
 bits in uffdio_api.features passed to UFFDIO_API ioctl:
 
-UFFD_FEATURE_EVENT_EXIT - enable notification about exit() of the
-non-cooperative process. When the monitored process exits, the uffd
-manager will get UFFD_EVENT_EXIT.
-
 UFFD_FEATURE_EVENT_FORK - enable userfaultfd hooks for fork(). When
 this feature is enabled, the userfaultfd context of the parent process
 is duplicated into the newly created process. The manager receives

arch/cris/arch-v32/drivers/cryptocop.c

@@ -2086,7 +2086,7 @@ static void cryptocop_job_queue_close(void)
 		dma_in_cfg.en = regk_dma_no;
 		REG_WR(dma, IN_DMA_INST, rw_cfg, dma_in_cfg);
 
-		/* Disble the cryptocop. */
+		/* Disable the cryptocop. */
 		rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg);
 		rw_cfg.en = 0;
 		REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg);

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -347,23 +347,58 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
 	__r;							\
 })
 
+static inline int __pte_write(pte_t pte)
+{
+	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE));
+}
+
+#ifdef CONFIG_NUMA_BALANCING
+#define pte_savedwrite pte_savedwrite
+static inline bool pte_savedwrite(pte_t pte)
+{
+	/*
+	 * Saved write ptes are prot none ptes that doesn't have
+	 * privileged bit sit. We mark prot none as one which has
+	 * present and pviliged bit set and RWX cleared. To mark
+	 * protnone which used to have _PAGE_WRITE set we clear
+	 * the privileged bit.
+	 */
+	return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED));
+}
+#else
+#define pte_savedwrite pte_savedwrite
+static inline bool pte_savedwrite(pte_t pte)
+{
+	return false;
+}
+#endif
+
+static inline int pte_write(pte_t pte)
+{
+	return __pte_write(pte) || pte_savedwrite(pte);
+}
+
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
 {
-	if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_WRITE)) == 0)
-		return;
-
-	pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0);
+	if (__pte_write(*ptep))
+		pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0);
+	else if (unlikely(pte_savedwrite(*ptep)))
+		pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 0);
 }
 
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
 {
-	if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_WRITE)) == 0)
-		return;
-
-	pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1);
+	/*
+	 * We should not find protnone for hugetlb, but this complete the
+	 * interface.
+	 */
+	if (__pte_write(*ptep))
+		pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1);
+	else if (unlikely(pte_savedwrite(*ptep)))
+		pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 1);
 }
 
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
@@ -397,11 +432,6 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
 	pte_update(mm, addr, ptep, ~0UL, 0, 0);
 }
 
-static inline int pte_write(pte_t pte)
-{
-	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE));
-}
-
 static inline int pte_dirty(pte_t pte)
 {
 	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_DIRTY));
@@ -465,19 +495,12 @@ static inline pte_t pte_clear_savedwrite(pte_t pte)
 	VM_BUG_ON(!pte_protnone(pte));
 	return __pte(pte_val(pte) | _PAGE_PRIVILEGED);
 }
-
-#define pte_savedwrite pte_savedwrite
-static inline bool pte_savedwrite(pte_t pte)
+#else
+#define pte_clear_savedwrite pte_clear_savedwrite
+static inline pte_t pte_clear_savedwrite(pte_t pte)
 {
-	/*
-	 * Saved write ptes are prot none ptes that doesn't have
-	 * privileged bit sit. We mark prot none as one which has
-	 * present and pviliged bit set and RWX cleared. To mark
-	 * protnone which used to have _PAGE_WRITE set we clear
-	 * the privileged bit.
-	 */
-	VM_BUG_ON(!pte_protnone(pte));
-	return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED));
+	VM_WARN_ON(1);
+	return __pte(pte_val(pte) & ~_PAGE_WRITE);
 }
 #endif /* CONFIG_NUMA_BALANCING */
 
@@ -506,6 +529,8 @@ static inline unsigned long pte_pfn(pte_t pte)
 /* Generic modifiers for PTE bits */
 static inline pte_t pte_wrprotect(pte_t pte)
 {
+	if (unlikely(pte_savedwrite(pte)))
+		return pte_clear_savedwrite(pte);
 	return __pte(pte_val(pte) & ~_PAGE_WRITE);
 }
 
@@ -926,6 +951,7 @@ static inline int pmd_protnone(pmd_t pmd)
 
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
+#define __pmd_write(pmd)	__pte_write(pmd_pte(pmd))
 #define pmd_savedwrite(pmd)	pte_savedwrite(pmd_pte(pmd))
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -982,11 +1008,10 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
 static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pmd_t *pmdp)
 {
-
-	if ((pmd_raw(*pmdp) & cpu_to_be64(_PAGE_WRITE)) == 0)
-		return;
-
-	pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0);
+	if (__pmd_write((*pmdp)))
+		pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0);
+	else if (unlikely(pmd_savedwrite(*pmdp)))
+		pmd_hugepage_update(mm, addr, pmdp, 0, _PAGE_PRIVILEGED);
 }
 
 static inline int pmd_trans_huge(pmd_t pmd)

arch/powerpc/kvm/book3s_64_mmu_hv.c

@@ -601,7 +601,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 							 hva, NULL, NULL);
 			if (ptep) {
 				pte = kvmppc_read_update_linux_pte(ptep, 1);
-				if (pte_write(pte))
+				if (__pte_write(pte))
 					write_ok = 1;
 			}
 			local_irq_restore(flags);

arch/powerpc/kvm/book3s_hv_rm_mmu.c

@@ -256,7 +256,7 @@ long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags,
 		}
 		pte = kvmppc_read_update_linux_pte(ptep, writing);
 		if (pte_present(pte) && !pte_protnone(pte)) {
-			if (writing && !pte_write(pte))
+			if (writing && !__pte_write(pte))
 				/* make the actual HPTE be read-only */
 				ptel = hpte_make_readonly(ptel);
 			is_ci = pte_ci(pte);

arch/sh/boards/mach-cayman/setup.c

@@ -128,7 +128,6 @@ static int __init smsc_superio_setup(void)
 	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
 	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
 
-#ifdef CONFIG_IDE
 	/*
 	 * Only IDE1 exists on the Cayman
 	 */
@@ -158,7 +157,6 @@ static int __init smsc_superio_setup(void)
 	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
 	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
 	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-#endif
 
 	/* Exit the configuration state */
 	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);

arch/x86/kernel/ftrace.c

@@ -535,7 +535,7 @@ static void run_sync(void)
 {
 	int enable_irqs = irqs_disabled();
 
-	/* We may be called with interrupts disbled (on bootup). */
+	/* We may be called with interrupts disabled (on bootup). */
 	if (enable_irqs)
 		local_irq_enable();
 	on_each_cpu(do_sync_core, NULL, 1);

arch/x86/mm/gup.c

@@ -106,32 +106,35 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	struct dev_pagemap *pgmap = NULL;
-	int nr_start = *nr;
-	pte_t *ptep;
+	int nr_start = *nr, ret = 0;
+	pte_t *ptep, *ptem;
 
-	ptep = pte_offset_map(&pmd, addr);
+	/*
+	 * Keep the original mapped PTE value (ptem) around since we
+	 * might increment ptep off the end of the page when finishing
+	 * our loop iteration.
+	 */
+	ptem = ptep = pte_offset_map(&pmd, addr);
 	do {
 		pte_t pte = gup_get_pte(ptep);
 		struct page *page;
 
 		/* Similar to the PMD case, NUMA hinting must take slow path */
-		if (pte_protnone(pte)) {
-			pte_unmap(ptep);
-			return 0;
-		}
+		if (pte_protnone(pte))
+			break;
+
+		if (!pte_allows_gup(pte_val(pte), write))
+			break;
 
 		if (pte_devmap(pte)) {
 			pgmap = get_dev_pagemap(pte_pfn(pte), pgmap);
 			if (unlikely(!pgmap)) {
 				undo_dev_pagemap(nr, nr_start, pages);
-				pte_unmap(ptep);
-				return 0;
+				break;
 			}
-		} else if (!pte_allows_gup(pte_val(pte), write) ||
-			   pte_special(pte)) {
-			pte_unmap(ptep);
-			return 0;
-		}
+		} else if (pte_special(pte))
+			break;
+
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);
 		get_page(page);
@@ -141,9 +144,11 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		(*nr)++;
 
 	} while (ptep++, addr += PAGE_SIZE, addr != end);
-	pte_unmap(ptep - 1);
+	if (addr == end)
+		ret = 1;
+	pte_unmap(ptem);
 
-	return 1;
+	return ret;
 }
 
 static inline void get_head_page_multiple(struct page *page, int nr)

drivers/block/paride/pcd.c

@@ -50,7 +50,7 @@
                         the slower the port i/o.  In some cases, setting
                         this to zero will speed up the device. (default -1)
                         
-            major       You may use this parameter to overide the
+            major       You may use this parameter to override the
                         default major number (46) that this driver
                         will use.  Be sure to change the device
                         name as well.

drivers/block/paride/pd.c

@@ -61,7 +61,7 @@
                         first drive found.
 			
 
-            major       You may use this parameter to overide the
+            major       You may use this parameter to override the
                         default major number (45) that this driver
                         will use.  Be sure to change the device
                         name as well.

drivers/block/paride/pf.c

@@ -59,7 +59,7 @@
                         the slower the port i/o.  In some cases, setting
                         this to zero will speed up the device. (default -1)
 
-	    major	You may use this parameter to overide the
+	    major	You may use this parameter to override the
 			default major number (47) that this driver
 			will use.  Be sure to change the device
 			name as well.

drivers/block/paride/pg.c

@@ -84,7 +84,7 @@
 			the slower the port i/o.  In some cases, setting
 			this to zero will speed up the device. (default -1)
 
-	    major	You may use this parameter to overide the
+	    major	You may use this parameter to override the
 			default major number (97) that this driver
 			will use.  Be sure to change the device
 			name as well.

drivers/block/paride/pt.c

@@ -61,7 +61,7 @@
                         the slower the port i/o.  In some cases, setting
                         this to zero will speed up the device. (default -1)
 
-	    major	You may use this parameter to overide the
+	    major	You may use this parameter to override the
 			default major number (96) that this driver
 			will use.  Be sure to change the device
 			name as well.

drivers/crypto/ux500/cryp/cryp.c

@@ -82,7 +82,7 @@ void cryp_activity(struct cryp_device_data *device_data,
 void cryp_flush_inoutfifo(struct cryp_device_data *device_data)
 {
 	/*
-	 * We always need to disble the hardware before trying to flush the
+	 * We always need to disable the hardware before trying to flush the
 	 * FIFO. This is something that isn't written in the design
 	 * specification, but we have been informed by the hardware designers
 	 * that this must be done.

drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c

@@ -788,7 +788,7 @@ static int sdma_v3_0_start(struct amdgpu_device *adev)
 		}
 	}
 
-	/* disble sdma engine before programing it */
+	/* disable sdma engine before programing it */
 	sdma_v3_0_ctx_switch_enable(adev, false);
 	sdma_v3_0_enable(adev, false);
 

drivers/hv/channel.c

@@ -543,7 +543,7 @@ static int vmbus_close_internal(struct vmbus_channel *channel)
 	/*
 	 * In case a device driver's probe() fails (e.g.,
 	 * util_probe() -> vmbus_open() returns -ENOMEM) and the device is
-	 * rescinded later (e.g., we dynamically disble an Integrated Service
+	 * rescinded later (e.g., we dynamically disable an Integrated Service
 	 * in Hyper-V Manager), the driver's remove() invokes vmbus_close():
 	 * here we should skip most of the below cleanup work.
 	 */

drivers/isdn/hisax/st5481_b.c

@@ -239,7 +239,7 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode)
 			}
 		}
 	} else {
-		// Disble B channel interrupts
+		// Disable B channel interrupts
 		st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel * 2), 0, NULL, NULL);
 
 		// Disable B channel FIFOs

drivers/md/bcache/util.h

@@ -4,7 +4,6 @@
 
 #include <linux/blkdev.h>
 #include <linux/errno.h>
-#include <linux/blkdev.h>
 #include <linux/kernel.h>
 #include <linux/sched/clock.h>
 #include <linux/llist.h>