Merge v6.3-rc4 into drm-next

I just landed the fence deadline PR from Rob that a bunch of drivers
want/need to apply driver-specific patches. Backmerge -rc4 so that
they don't have to be stuck on -rc2 for no reason at all.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

.gitignore

@@ -78,6 +78,7 @@ modules.order
 # RPM spec file (make rpm-pkg)
 #
 /*.spec
+/rpmbuild/
 
 #
 # Debian directory (make deb-pkg)

.mailmap

@@ -28,6 +28,7 @@ Alexander Lobakin <alobakin@pm.me> <bloodyreaper@yandex.ru>
 Alexander Mikhalitsyn <alexander@mihalicyn.com> <alexander.mikhalitsyn@virtuozzo.com>
 Alexander Mikhalitsyn <alexander@mihalicyn.com> <aleksandr.mikhalitsyn@canonical.com>
 Alexandre Belloni <alexandre.belloni@bootlin.com> <alexandre.belloni@free-electrons.com>
+Alexandre Ghiti <alex@ghiti.fr> <alexandre.ghiti@canonical.com>
 Alexei Starovoitov <ast@kernel.org> <alexei.starovoitov@gmail.com>
 Alexei Starovoitov <ast@kernel.org> <ast@fb.com>
 Alexei Starovoitov <ast@kernel.org> <ast@plumgrid.com>
@@ -121,7 +122,7 @@ Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@gmail.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
 <dev.kurt@vandijck-laurijssen.be> <kurt.van.dijck@eia.be>
-Dikshita Agarwal <dikshita@qti.qualcomm.com> <dikshita@codeaurora.org>
+Dikshita Agarwal <quic_dikshita@quicinc.com> <dikshita@codeaurora.org>
 Dmitry Baryshkov <dbaryshkov@gmail.com>
 Dmitry Baryshkov <dbaryshkov@gmail.com> <[dbaryshkov@gmail.com]>
 Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_baryshkov@mentor.com>
@@ -132,6 +133,8 @@ Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>
 Domen Puncer <domen@coderock.org>
 Douglas Gilbert <dougg@torque.net>
 Ed L. Cashin <ecashin@coraid.com>
+Enric Balletbo i Serra <eballetbo@kernel.org> <enric.balletbo@collabora.com>
+Enric Balletbo i Serra <eballetbo@kernel.org> <eballetbo@iseebcn.com>
 Erik Kaneda <erik.kaneda@intel.com> <erik.schmauss@intel.com>
 Eugen Hristev <eugen.hristev@collabora.com> <eugen.hristev@microchip.com>
 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
@@ -194,6 +197,7 @@ Jan Glauber <jan.glauber@gmail.com> <jang@linux.vnet.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
 Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@linux.intel.com>
 Jarkko Sakkinen <jarkko@kernel.org> <jarkko@profian.com>
+Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@tuni.fi>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@nvidia.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
@@ -213,6 +217,9 @@ Jens Axboe <axboe@suse.de>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
 Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
 Jessica Zhang <quic_jesszhan@quicinc.com> <jesszhan@codeaurora.org>
+Jiri Pirko <jiri@resnulli.us> <jiri@nvidia.com>
+Jiri Pirko <jiri@resnulli.us> <jiri@mellanox.com>
+Jiri Pirko <jiri@resnulli.us> <jpirko@redhat.com>
 Jiri Slaby <jirislaby@kernel.org> <jirislaby@gmail.com>
 Jiri Slaby <jirislaby@kernel.org> <jslaby@novell.com>
 Jiri Slaby <jirislaby@kernel.org> <jslaby@suse.com>
@@ -374,6 +381,7 @@ Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
 Rajeev Nandan <quic_rajeevny@quicinc.com> <rajeevny@codeaurora.org>
+Rajendra Nayak <quic_rjendra@quicinc.com> <rnayak@codeaurora.org>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
@@ -382,6 +390,9 @@ Rémi Denis-Courmont <rdenis@simphalempin.com>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo@ribalda.com>
 Ricardo Ribalda <ribalda@kernel.org> Ricardo Ribalda Delgado <ribalda@kernel.org>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo.ribalda@gmail.com>
+Richard Leitner <richard.leitner@linux.dev> <dev@g0hl1n.net>
+Richard Leitner <richard.leitner@linux.dev> <me@g0hl1n.net>
+Richard Leitner <richard.leitner@linux.dev> <richard.leitner@skidata.com>
 Robert Foss <rfoss@kernel.org> <robert.foss@linaro.org>
 Roman Gushchin <roman.gushchin@linux.dev> <guro@fb.com>
 Roman Gushchin <roman.gushchin@linux.dev> <guroan@gmail.com>
@@ -392,6 +403,7 @@ Ross Zwisler <zwisler@kernel.org> <ross.zwisler@linux.intel.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
+Sai Prakash Ranjan <quic_saipraka@quicinc.com> <saiprakash.ranjan@codeaurora.org>
 Sakari Ailus <sakari.ailus@linux.intel.com> <sakari.ailus@iki.fi>
 Sam Ravnborg <sam@mars.ravnborg.org>
 Sankeerth Billakanti <quic_sbillaka@quicinc.com> <sbillaka@codeaurora.org>
@@ -432,6 +444,10 @@ Thomas Graf <tgraf@suug.ch>
 Thomas Körper <socketcan@esd.eu> <thomas.koerper@esd.eu>
 Thomas Pedersen <twp@codeaurora.org>
 Tiezhu Yang <yangtiezhu@loongson.cn> <kernelpatch@126.com>
+Tobias Klauser <tklauser@distanz.ch> <tobias.klauser@gmail.com>
+Tobias Klauser <tklauser@distanz.ch> <klto@zhaw.ch>
+Tobias Klauser <tklauser@distanz.ch> <tklauser@nuerscht.ch>
+Tobias Klauser <tklauser@distanz.ch> <tklauser@xenon.tklauser.home>
 Todor Tomov <todor.too@gmail.com> <todor.tomov@linaro.org>
 Tony Luck <tony.luck@intel.com>
 TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>

Documentation/driver-api/vfio.rst

@@ -242,7 +242,7 @@ group and can access them as follows::
 VFIO User API
 -------------------------------------------------------------------------------
 
-Please see include/linux/vfio.h for complete API documentation.
+Please see include/uapi/linux/vfio.h for complete API documentation.
 
 VFIO bus driver API
 -------------------------------------------------------------------------------

Documentation/filesystems/vfs.rst

@@ -1222,7 +1222,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",

Documentation/firmware-guide/acpi/enumeration.rst

@@ -19,7 +19,7 @@ possible we decided to do following:
     platform devices.
 
   - Devices behind real busses where there is a connector resource
-    are represented as struct spi_device or struct i2c_device. Note
+    are represented as struct spi_device or struct i2c_client. Note
     that standard UARTs are not busses so there is no struct uart_device,
     although some of them may be represented by struct serdev_device.
 

Documentation/maintainer/rebasing-and-merging.rst

@@ -213,11 +213,7 @@ point rather than some random spot.  If your upstream-bound branch has
 emptied entirely into the mainline during the merge window, you can pull it
 forward with a command like::
 
-  git merge v5.2-rc1^0
-
-The "^0" will cause Git to do a fast-forward merge (which should be
-possible in this situation), thus avoiding the addition of a spurious merge
-commit.
+  git merge --ff-only v5.2-rc1
 
 The guidelines laid out above are just that: guidelines.  There will always
 be situations that call out for a different solution, and these guidelines

Documentation/mm/hugetlbfs_reserv.rst

@@ -5,10 +5,10 @@ Hugetlbfs Reservation
 Overview
 ========
 
-Huge pages as described at Documentation/mm/hugetlbpage.rst are typically
-preallocated for application use.  These huge pages are instantiated in a
-task's address space at page fault time if the VMA indicates huge pages are
-to be used.  If no huge page exists at page fault time, the task is sent
+Huge pages as described at Documentation/admin-guide/mm/hugetlbpage.rst are
+typically preallocated for application use.  These huge pages are instantiated
+in a task's address space at page fault time if the VMA indicates huge pages
+are to be used.  If no huge page exists at page fault time, the task is sent
 a SIGBUS and often dies an unhappy death.  Shortly after huge page support
 was added, it was determined that it would be better to detect a shortage
 of huge pages at mmap() time.  The idea is that if there were not enough

Documentation/mm/physical_memory.rst

@@ -66,7 +66,7 @@ one of the types described below.
   also populated on boot using one of ``kernelcore``, ``movablecore`` and
   ``movable_node`` kernel command line parameters. See
   Documentation/mm/page_migration.rst and
-  Documentation/admin-guide/mm/memory_hotplug.rst for additional details.
+  Documentation/admin-guide/mm/memory-hotplug.rst for additional details.
 
 * ``ZONE_DEVICE`` represents memory residing on devices such as PMEM and GPU.
   It has different characteristics than RAM zone types and it exists to provide

Documentation/netlink/genetlink-c.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 %YAML 1.2
 ---
 $id: http://kernel.org/schemas/netlink/genetlink-c.yaml#

Documentation/netlink/genetlink-legacy.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 %YAML 1.2
 ---
 $id: http://kernel.org/schemas/netlink/genetlink-legacy.yaml#

Documentation/netlink/genetlink.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 %YAML 1.2
 ---
 $id: http://kernel.org/schemas/netlink/genetlink-legacy.yaml#

Documentation/netlink/specs/ethtool.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 
 name: ethtool
 

Documentation/netlink/specs/fou.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 
 name: fou
 

Documentation/netlink/specs/netdev.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 
 name: netdev
 
@@ -9,6 +9,7 @@ definitions:
   -
     type: flags
     name: xdp-act
+    render-max: true
     entries:
       -
         name: basic

Documentation/networking/xdp-rx-metadata.rst

@@ -23,10 +23,13 @@ metadata is supported, this set will grow:
 An XDP program can use these kfuncs to read the metadata into stack
 variables for its own consumption. Or, to pass the metadata on to other
 consumers, an XDP program can store it into the metadata area carried
-ahead of the packet.
+ahead of the packet. Not all packets will necessary have the requested
+metadata available in which case the driver returns ``-ENODATA``.
 
 Not all kfuncs have to be implemented by the device driver; when not
-implemented, the default ones that return ``-EOPNOTSUPP`` will be used.
+implemented, the default ones that return ``-EOPNOTSUPP`` will be used
+to indicate the device driver have not implemented this kfunc.
+
 
 Within an XDP frame, the metadata layout (accessed via ``xdp_buff``) is
 as follows::

Documentation/process/programming-language.rst

@@ -12,10 +12,6 @@ under ``-std=gnu11`` [gcc-c-dialect-options]_: the GNU dialect of ISO C11.
 This dialect contains many extensions to the language [gnu-extensions]_,
 and many of them are used within the kernel as a matter of course.
 
-There is some support for compiling the kernel with ``icc`` [icc]_ for several
-of the architectures, although at the time of writing it is not completed,
-requiring third-party patches.
-
 Attributes
 ----------
 
@@ -35,12 +31,28 @@ in order to feature detect which ones can be used and/or to shorten the code.
 
 Please refer to ``include/linux/compiler_attributes.h`` for more information.
 
+Rust
+----
+
+The kernel has experimental support for the Rust programming language
+[rust-language]_ under ``CONFIG_RUST``. It is compiled with ``rustc`` [rustc]_
+under ``--edition=2021`` [rust-editions]_. Editions are a way to introduce
+small changes to the language that are not backwards compatible.
+
+On top of that, some unstable features [rust-unstable-features]_ are used in
+the kernel. Unstable features may change in the future, thus it is an important
+goal to reach a point where only stable features are used.
+
+Please refer to Documentation/rust/index.rst for more information.
+
 .. [c-language] http://www.open-std.org/jtc1/sc22/wg14/www/standards
 .. [gcc] https://gcc.gnu.org
 .. [clang] https://clang.llvm.org
-.. [icc] https://software.intel.com/en-us/c-compilers
 .. [gcc-c-dialect-options] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html
 .. [gnu-extensions] https://gcc.gnu.org/onlinedocs/gcc/C-Extensions.html
 .. [gcc-attribute-syntax] https://gcc.gnu.org/onlinedocs/gcc/Attribute-Syntax.html
 .. [n2049] http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2049.pdf
-
+.. [rust-language] https://www.rust-lang.org
+.. [rustc] https://doc.rust-lang.org/rustc/
+.. [rust-editions] https://doc.rust-lang.org/edition-guide/editions/
+.. [rust-unstable-features] https://github.com/Rust-for-Linux/linux/issues/2

Documentation/process/submitting-patches.rst

@@ -320,7 +320,7 @@ for their time.  Code review is a tiring and time-consuming process, and
 reviewers sometimes get grumpy.  Even in that case, though, respond
 politely and address the problems they have pointed out.  When sending a next
 version, add a ``patch changelog`` to the cover letter or to individual patches
-explaining difference aganst previous submission (see
+explaining difference against previous submission (see
 :ref:`the_canonical_patch_format`).
 
 See Documentation/process/email-clients.rst for recommendations on email

Documentation/scheduler/sched-capacity.rst

@@ -258,7 +258,7 @@ Linux cannot currently figure out CPU capacity on its own, this information thus
 needs to be handed to it. Architectures must define arch_scale_cpu_capacity()
 for that purpose.
 
-The arm and arm64 architectures directly map this to the arch_topology driver
+The arm, arm64, and RISC-V architectures directly map this to the arch_topology driver
 CPU scaling data, which is derived from the capacity-dmips-mhz CPU binding; see
 Documentation/devicetree/bindings/cpu/cpu-capacity.txt.
 

Documentation/translations/zh_CN/mm/hugetlbfs_reserv.rst

@@ -15,7 +15,8 @@ Hugetlbfs 预留
 概述
 ====
 
-Documentation/mm/hugetlbpage.rst 中描述的巨页通常是预先分配给应用程序使用的。如果VMA指
+Documentation/admin-guide/mm/hugetlbpage.rst
+中描述的巨页通常是预先分配给应用程序使用的 。如果VMA指
 示要使用巨页，这些巨页会在缺页异常时被实例化到任务的地址空间。如果在缺页异常
 时没有巨页存在，任务就会被发送一个SIGBUS，并经常不高兴地死去。在加入巨页支
 持后不久，人们决定，在mmap()时检测巨页的短缺情况会更好。这个想法是，如果

Documentation/translations/zh_CN/scheduler/sched-capacity.rst

@@ -231,7 +231,7 @@ CFS调度类基于实体负载跟踪机制（Per-Entity Load Tracking, PELT）
 当前，Linux无法凭自身算出CPU算力，因此必须要有把这个信息传递给Linux的方式。每个架构必须为此
 定义arch_scale_cpu_capacity()函数。
 
-arm和arm64架构直接把这个信息映射到arch_topology驱动的CPU scaling数据中（译注：参考
+arm、arm64和RISC-V架构直接把这个信息映射到arch_topology驱动的CPU scaling数据中（译注：参考
 arch_topology.h的percpu变量cpu_scale），它是从capacity-dmips-mhz CPU binding中衍生计算
 出来的。参见Documentation/devicetree/bindings/cpu/cpu-capacity.txt。