mirror of
https://github.com/armbian/build.git
synced 2026-01-06 09:58:46 -08:00
rockchip64-6.18: mixtile-core3588e: device tree additions & fixes
- on top of Joshua Riek's DT, add: - GPU - NPU - i2c5 (40-pin) - saradc - tsadc (thermals) - pwm2 / tacho / cooling fan - sys-led - usb2 otg (for flashing / UMS - microusb port) - USB3 ports (via usb hub on carrier board) - hdmi0 & hdmi0 audio & vop - uart1 (40-pin)
This commit is contained in:
Ricardo Pardini
Igor
@@ -8,6 +8,7 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
@@ -25,14 +26,26 @@
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 25 95 145 195 255>;
|
||||
cooling-levels = <0 40 51 77 102 128 153 179 204 230 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_EDGE_FALLING>;
|
||||
pwms = <&pwm2 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: led-0 {
|
||||
label = "sys_led";
|
||||
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
@@ -54,6 +67,20 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
@@ -63,10 +90,17 @@
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
@@ -109,6 +143,11 @@
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
@@ -124,6 +163,30 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
@@ -187,6 +250,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
/* maybe on some pin connector? found on vendor kernel */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
};
|
||||
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c4m3_xfer>;
|
||||
@@ -205,6 +276,18 @@
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
/* on 40-pin connector pins: pin 3 is SDA; pin 5 is SCL */
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m2_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// hdmi-0 audio
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
@@ -219,6 +302,107 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* Temperature sensor near the center of the SoC */
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
trips {
|
||||
trip0: trip0 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <45000>; /* 45 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip1: trip1 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <52000>; /* 52 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip2: trip2 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <54000>; /* 54 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip3: trip3 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <56000>; /* 56 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip4: trip4 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <58000>; /* 58 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip5: trip5 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <60000>; /* 60 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip6: trip6 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <62000>; /* 62 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip7: trip7 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <64000>; /* 64 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip8: trip8 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <66000>; /* 66 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip9: trip9 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <70000>; /* 70 celsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip0>;
|
||||
};
|
||||
map1 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip1>;
|
||||
};
|
||||
map2 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip2>;
|
||||
};
|
||||
map3 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip3>;
|
||||
};
|
||||
map4 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip4>;
|
||||
};
|
||||
map5 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip5>;
|
||||
};
|
||||
map6 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip6>;
|
||||
};
|
||||
map7 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip7>;
|
||||
};
|
||||
map8 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip8>;
|
||||
};
|
||||
map9 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l1 {
|
||||
linux,pci-domain = <1>;
|
||||
pinctrl-names = "default";
|
||||
@@ -240,6 +424,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_gpu {
|
||||
domain-supply = <&vdd_gpu_s0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
@@ -278,14 +466,30 @@
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm2m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
@@ -298,61 +502,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Temperature sensor near the center of the SoC */
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
trips {
|
||||
soc_active1: trip-active1 {
|
||||
temperature = <37500>;
|
||||
hysteresis = <1000>;
|
||||
type = "active";
|
||||
};
|
||||
soc_active2: trip-active2 {
|
||||
temperature = <42500>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
soc_active3: trip-active3 {
|
||||
temperature = <47500>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
soc_active4: trip-active4 {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
soc_active5: trip-active5 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map1 {
|
||||
trip = <&soc_active1>;
|
||||
cooling-device = <&fan 1 1>;
|
||||
};
|
||||
map2 {
|
||||
trip = <&soc_active2>;
|
||||
cooling-device = <&fan 2 2>;
|
||||
};
|
||||
map3 {
|
||||
trip = <&soc_active3>;
|
||||
cooling-device = <&fan 3 3>;
|
||||
};
|
||||
map4 {
|
||||
trip = <&soc_active4>;
|
||||
cooling-device = <&fan 4 4>;
|
||||
};
|
||||
map5 {
|
||||
trip = <&soc_active5>;
|
||||
cooling-device = <&fan 5 5>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
@@ -675,7 +824,114 @@
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// required for pcie2x1l1
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg { // for fc000000.usb UDC
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 { // for usb_host1_xhci
|
||||
// usb hub on carrier board is brought up by vcc5v0_host always-on
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg { // for usb_host1_xhci, otherwise "rockchip-usb2phy fd5d4000.syscon:usb2phy@4000: Requested PHY is disabled"
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 { // for usb_host1_xhci
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci { // usb@fc000000
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&u2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci { // usb@fc400000 <-- this works on vendor (as usb8 -> usbdrd3_1/fc400000.usb), there's a hub on the carrier board
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// 40-pin: pin 8 is UART TX; pin 10 is UART RX (unconfirmed)
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
|
||||
};
|
||||
|
||||
// found on vendor kernel, but no idea where it is physically
|
||||
&uart7 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m1_xfer &uart7m1_ctsn &uart7m1_rtsn>;
|
||||
};
|
||||
|
||||
// debug port, on the extra horizontal pins on the carrier board (NOT 40-pin)
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_npu {
|
||||
domain-supply = <&vdd_npu_s0>;
|
||||
};
|
||||
|
||||
&rknn_core_0 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_core_1 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_core_2 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user