archr/Arch-R
0
0
Fork 0
mirror of https://github.com/archr-linux/Arch-R.git synced 2026-07-12 18:19:42 -07:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'archr-linux:new-arch' into new-arch

Browse Source
This commit is contained in:
PM2D
2026-03-27 17:30:38 +07:00
committed by GitHub
parent 722a961c2b 36b8bfdc54
commit d818f96b93
5 changed files with 317 additions and 106 deletions
Download Patch File Download Diff File Expand all files Collapse all files
config/archr-dts/rk3326-gameconsole-soysauce.dts
+58 -91
View File
@@ -4,12 +4,12 @@
*
* Device tree for R36S "soysauce" variant (Y3506 boards).
* Hardware differences from standard R36S:
* - Panel reset GPIO: GPIO3_PB0 (standard uses GPIO3_PC0)
* - Panel enable GPIO: GPIO1_PC2 (standard has none)
* - Speaker control GPIO: GPIO3_PC4 (same pin, different function)
* - LED GPIOs: GPIO0_PA5 (red), GPIO0_PA0 (blue) on soysauce
* - No backlight-supply regulator (backlight powered directly)
* - Different panel timing parameters (varies by sub-variant)
* - All buttons on GPIO3 (standard uses GPIO1/GPIO2)
* - Analog mux on GPIO0 (standard uses GPIO3)
* - Panel reset GPIO: GPIO3_PB0
* - Panel enable GPIO: GPIO1_PC2
* - amux-channel-mapping reordered
* - Different joypad product ID (0x1100 "GO-Super Gamepad")
*/
/dts-v1/;
@@ -24,15 +24,6 @@
this = "soysauce";
};
/* Soysauce uses speaker amp on same GPIO as standard R36S */
spk_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&spk_amp_enable_h>;
pinctrl-names = "default";
sound-name-prefix = "Speaker Amp";
};
/* LED indicators (soysauce-specific) */
leds {
compatible = "gpio-leds";
@@ -57,35 +48,28 @@
rumble-boost-weak = <0x0000>;
rumble-boost-strong = <0x0000>;
joypad-name = "r36s_Gamepad";
joypad-product = <0x1188>;
joypad-revision = <0x0188>;
joypad-name = "GO-Super Gamepad";
joypad-product = <0x1100>;
joypad-revision = <0x0100>;
status = "okay";
/* gpio pincontrol setup */
pinctrl-names = "default";
pinctrl-0 = <&btn_pins>;
pinctrl-1 = <&pwm0_pin>;
/* Analog mux define */
/* Analog mux on GPIO0 (different from standard R36S) */
io-channel-names = "amux_adc";
io-channels = <&saradc 1>;
/* adc mux channel count */
amux-count = <4>;
/* adc mux select(a,b) gpio */
amux-a-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
amux-b-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
/* adc mux enable gpio */
amux-en-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
amux-channel-mapping = <3 2 0 1>;
amux-a-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
amux-b-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
amux-en-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
/* adc calculate scale */
button-adc-scale = <2>;
/* adc deadzone range */
button-adc-deadzone = <64>;
button-adc-fuzz = <32>;
button-adc-flat = <32>;
@@ -98,113 +82,100 @@
abs_ry-p-tuning = <200>;
abs_ry-n-tuning = <200>;
/* poll device interval (ms) */
poll-interval = <10>;
/* required for R36S */
invert-absx;
invert-absy;
/* All buttons on GPIO3 (soysauce layout) */
sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
label = "GPIO KEY BTN-A";
linux,code = <BTN_EAST>;
};
sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
label = "GPIO BTN-B";
linux,code = <BTN_SOUTH>;
};
sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
label = "GPIO BTN-Y";
linux,code = <BTN_WEST>;
};
sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
label = "GPIO BTN-X";
linux,code = <BTN_NORTH>;
};
sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_THUMBL";
linux,code = <BTN_THUMBL>;
};
sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_THUMBR";
linux,code = <BTN_THUMBR>;
};
sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_FN";
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_MODE";
linux,code = <BTN_MODE>;
};
sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-LEFT";
linux,code = <BTN_TL>;
};
sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-RIGHT";
linux,code = <BTN_TR>;
};
sw19 {
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_SELECT";
linux,code = <BTN_SELECT>;
};
sw20 {
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-RIGHT2";
linux,code = <BTN_TR2>;
};
sw21 {
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-LEFT2";
linux,code = <BTN_TL2>;
};
sw21 {
gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-RIGHT2";
linux,code = <BTN_TR2>;
};
sw22 {
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_START";
linux,code = <BTN_START>;
};
};
};
/* Override sound card from r3xs.dtsi: add speaker amplifier */
/ {
rk817-sound {
simple-audio-card,aux-devs = <&spk_amp>;
simple-audio-card,routing =
"MICL", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR",
"Speaker Amp INL", "SPKO";
};
};
/* Soysauce panel: different reset GPIO + additional enable GPIO */
&internal_display {
compatible = "archr,generic-dsi", "rocknix,generic-dsi";
@@ -213,37 +184,33 @@
};
&rk817_codec {
/* Soysauce has spk-ctl on GPIO3_PC4 */
spk-ctl-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
};
&pinctrl {
btns {
btn_pins: btn-pins {
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
speaker {
spk_amp_enable_h: spk-amp-enable-h {
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins =
<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
config/mipi-generator/generator.sh
Regular → Executable
+10 -10
View File
@@ -189,18 +189,18 @@ if [ -d "$SOYSAUCE_DIR" ]; then
log ""
declare -A SOYSAUCE_PANELS=(
[soysauce_v03_1104]="Y3506_V03_20241104/rk3326-r36s-linux.dtb"
[soysauce_v03_1210]="Y3506_v03_20241210/rk3326-r36s-linux.dtb"
[soysauce_v03_0317]="Y3506_V03_20250317/rk3326-r36s-linux.dtb"
[soysauce_v04_253x]="Y3506_V04_20250529 253x Panel 6/rk3326-r36s-linux.dtb"
[soysauce_v04_2548]="Y3506_V04_20250529 2548/rk3326-r36s-linux.dtb"
[soysauce_v05_2551]="Y3506_V05_20251215 2551/rk3326-r36s-linux.dtb"
[soysauce_v05_2601]="Y3506_V05_20251215 2601/rk3326-r36s-linux.dtb"
[ss_v03_20241104]="Y3506_V03_20241104/rk3326-r36s-linux.dtb"
[ss_v03_20241210]="Y3506_v03_20241210/rk3326-r36s-linux.dtb"
[ss_v03_20250317]="Y3506_V03_20250317/rk3326-r36s-linux.dtb"
[ss_v04_20250529_253x]="Y3506_V04_20250529 253x Panel 6/rk3326-r36s-linux.dtb"
[ss_v04_20250529_2548]="Y3506_V04_20250529 2548/rk3326-r36s-linux.dtb"
[ss_v05_20251215_2551]="Y3506_V05_20251215 2551/rk3326-r36s-linux.dtb"
[ss_v05_20251215_2601]="Y3506_V05_20251215 2601/rk3326-r36s-linux.dtb"
)
SOYSAUCE_ORDER=(soysauce_v03_1104 soysauce_v03_1210 soysauce_v03_0317
soysauce_v04_253x soysauce_v04_2548
soysauce_v05_2551 soysauce_v05_2601)
SOYSAUCE_ORDER=(ss_v03_20241104 ss_v03_20241210 ss_v03_20250317
ss_v04_20250529_253x ss_v04_20250529_2548
ss_v05_20251215_2551 ss_v05_20251215_2601)
for key in "${SOYSAUCE_ORDER[@]}"; do
dtb="${SOYSAUCE_PANELS[$key]}"
projects/ArchR/bootloader/mkimage
+22 -3
View File
@@ -67,15 +67,34 @@ mkimage_dtb() {
case "$DEVICE" in
RK3326)
mmd ::dtbs 2>/dev/null || true
mcopy "${RELEASE_DIR}/3rdparty/bootloader/device_trees/"*.dtb ::dtbs/
# Copy only DTBs listed in config.xml for this SUBDEVICE
DTB_LIST=$(xmlstarlet sel -t -v "//archr/RK3326/${SUBDEVICE}/file" "${PROJECT_DIR}/${PROJECT}/config.xml" 2>/dev/null)
if [ -n "${DTB_LIST}" ]; then
for dtb_name in ${DTB_LIST}; do
DTB_FILE="${RELEASE_DIR}/3rdparty/bootloader/device_trees/rockchip/${dtb_name}.dtb"
[ ! -f "${DTB_FILE}" ] && DTB_FILE="${RELEASE_DIR}/3rdparty/bootloader/device_trees/${dtb_name}.dtb"
if [ -f "${DTB_FILE}" ]; then
mcopy "${DTB_FILE}" ::dtbs/
else
echo "WARNING: DTB not found: ${dtb_name}.dtb"
fi
done
else
# Fallback: copy all DTBs if config.xml parsing fails
mcopy "${RELEASE_DIR}/3rdparty/bootloader/device_trees/"*.dtb ::dtbs/
fi
mcopy "${RELEASE_DIR}/3rdparty/bootloader/stock" ::
# Copy SUBDEVICE-specific panel overlays, fallback to generic
if [ -d "${RELEASE_DIR}/3rdparty/bootloader/overlays_${SUBDEVICE}" ]; then
echo "image: copying ${SUBDEVICE} panel overlays..."
mmd ::overlays 2>/dev/null || true
mcopy "${RELEASE_DIR}/3rdparty/bootloader/overlays_${SUBDEVICE}/"*.dtbo ::overlays/
elif [ -d "${RELEASE_DIR}/3rdparty/bootloader/overlays" ]; then
mcopy "${RELEASE_DIR}/3rdparty/bootloader/overlays" ::
fi
# Copy soysauce overlays into original image (soysauce shares ADC with original)
if [ "${SUBDEVICE}" = "original" ] && [ -d "${RELEASE_DIR}/3rdparty/bootloader/overlays_soysauce" ]; then
echo "image: copying soysauce panel overlays..."
mmd ::overlays/soysauce 2>/dev/null || true
mcopy "${RELEASE_DIR}/3rdparty/bootloader/overlays_soysauce/"*.dtbo ::overlays/soysauce/
fi
;;
SM8550|SM8650|SM8250|SDM845)
projects/ArchR/devices/RK3326/linux/dts/rockchip/rk3326-gameconsole-soysauce.dts
+225
View File
@@ -0,0 +1,225 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2026 ArchR (https://github.com/archr-linux/Arch-R)
*
* Device tree for R36S "soysauce" variant (Y3506 boards).
* Hardware differences from standard R36S:
* - All buttons on GPIO3 (standard uses GPIO1/GPIO2)
* - Analog mux on GPIO0 (standard uses GPIO3)
* - Panel reset GPIO: GPIO3_PB0
* - Panel enable GPIO: GPIO1_PC2
* - amux-channel-mapping reordered
* - Different joypad product ID (0x1100 "GO-Super Gamepad")
*/
/dts-v1/;
#include "rk3326-gameconsole-r3xs.dtsi"
#include "rk3326-device-group-r36.dtsi"
/ {
model = "Game Console R36S Soysauce";
compatible = "gameconsole,soysauce", "gameconsole,r36s", "rockchip,rk3326";
archr,device_switch {
this = "soysauce";
};
/* LED indicators (soysauce-specific) */
leds {
compatible = "gpio-leds";
led-red {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "red";
default-state = "off";
};
led-blue {
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
label = "blue";
default-state = "off";
};
};
joypad: odroidgo3-joypad {
compatible = "odroidgo3-joypad";
pwms = <&pwm0 0 200000000 0>;
pwm-names = "enable";
rumble-boost-weak = <0x0000>;
rumble-boost-strong = <0x0000>;
joypad-name = "GO-Super Gamepad";
joypad-product = <0x1100>;
joypad-revision = <0x0100>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&btn_pins>;
pinctrl-1 = <&pwm0_pin>;
/* Analog mux on GPIO0 (different from standard R36S) */
io-channel-names = "amux_adc";
io-channels = <&saradc 1>;
amux-count = <4>;
amux-channel-mapping = <3 2 0 1>;
amux-a-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
amux-b-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
amux-en-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
button-adc-scale = <2>;
button-adc-deadzone = <64>;
button-adc-fuzz = <32>;
button-adc-flat = <32>;
abs_x-p-tuning = <200>;
abs_x-n-tuning = <200>;
abs_y-p-tuning = <200>;
abs_y-n-tuning = <200>;
abs_rx-p-tuning = <200>;
abs_rx-n-tuning = <200>;
abs_ry-p-tuning = <200>;
abs_ry-n-tuning = <200>;
poll-interval = <10>;
invert-absx;
invert-absy;
/* All buttons on GPIO3 (soysauce layout) */
sw1 {
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
sw2 {
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
sw3 {
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
sw4 {
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
label = "GPIO DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
sw5 {
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
label = "GPIO KEY BTN-A";
linux,code = <BTN_EAST>;
};
sw6 {
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
label = "GPIO BTN-B";
linux,code = <BTN_SOUTH>;
};
sw7 {
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
label = "GPIO BTN-Y";
linux,code = <BTN_WEST>;
};
sw8 {
gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
label = "GPIO BTN-X";
linux,code = <BTN_NORTH>;
};
sw11 {
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_THUMBL";
linux,code = <BTN_THUMBL>;
};
sw12 {
gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_THUMBR";
linux,code = <BTN_THUMBR>;
};
sw13 {
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_MODE";
linux,code = <BTN_MODE>;
};
sw15 {
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-LEFT";
linux,code = <BTN_TL>;
};
sw16 {
gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-RIGHT";
linux,code = <BTN_TR>;
};
sw19 {
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_SELECT";
linux,code = <BTN_SELECT>;
};
sw20 {
gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-LEFT2";
linux,code = <BTN_TL2>;
};
sw21 {
gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
label = "GPIO TOP-RIGHT2";
linux,code = <BTN_TR2>;
};
sw22 {
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
label = "GPIO BTN_START";
linux,code = <BTN_START>;
};
};
};
/* Soysauce panel: different reset GPIO + additional enable GPIO */
&internal_display {
compatible = "archr,generic-dsi", "rocknix,generic-dsi";
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
};
&rk817_codec {
spk-ctl-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
};
&pinctrl {
btns {
btn_pins: btn-pins {
rockchip,pins =
<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
panel {
panel_reset: panel-reset {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
panel_enable: panel-enable {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
projects/ArchR/devices/RK3326/packages/u-boot/package.mk
+2 -2
View File
@@ -100,10 +100,10 @@ makeinstall_target() {
find_dir_path config/stock && cp -av ${FOUND_PATH} "${INSTALL}/usr/share/bootloader/"
# Generate MIPI panel overlays if not already present
# Generate MIPI panel overlays
MIPI_GEN="${ROOT}/config/mipi-generator"
MIPI_OUT="${MIPI_GEN}/output"
if [ -x "${MIPI_GEN}/generator.sh" ] && [ ! -d "${MIPI_OUT}/original" ] || [ -z "$(ls -A "${MIPI_OUT}/original" 2>/dev/null)" ]; then
if [ -x "${MIPI_GEN}/generator.sh" ]; then
echo "Generating MIPI panel overlays..."
bash "${MIPI_GEN}/generator.sh" || echo "WARNING: Panel overlay generation failed (non-fatal)"
fi