treewide: fix typos

Found via `codespell -q 3 -S "*.patch,*.po" -L acount,afile,distroname,parm,serie,synopsys`

.gitignore

@@ -1,4 +1,4 @@
-# build directorys
+# build directories
 /build.*/
 /builds
 /.fakeroot.*

config/path

@@ -3,7 +3,7 @@
 
 set -e
 
-# setup initial directorys (relative to root)
+# setup initial directories (relative to root)
   CONFIG=config
   SCRIPTS=scripts
   PACKAGES=packages

config/show_config

@@ -64,7 +64,7 @@ show_config() {
     config_message+="\n - Include firmware:\t\t\t ${config_firmware}"
   done
 
-  # Image Filsystem
+  # Image Filesystem
 
   config_message+="\n\n Image Filesystems:"
   config_message+="\n ${dashes}${dashes}"

distributions/LibreELEC/options

@@ -221,7 +221,7 @@
 # mediacenter also automount internally drives at boottime via udev (yes / no)
   UDEVIL="yes"
 
-# Support for partitioning and formating disks in initramfs (yes / no)
+# Support for partitioning and formatting disks in initramfs (yes / no)
 # This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
   INITRAMFS_PARTED_SUPPORT="no"
 

packages/addons/browser/chrome/source/bin/chrome-downloader

@@ -52,7 +52,7 @@ rm -f ${CONTROL_FILE} ${DATA_FILE}
 rm -f ${CONTROL_FILE} ${DATA_FILE}
 
 ## extract chrome
-# extrat chrome.deb data to temp
+# extract chrome.deb data to temp
 kodi-send --action="Notification(Extracting Chrome,starting,1000,${ICON})" >/dev/null
 deb_extract_data ${CHROME_FILE} $ADDON_DIR/tmp_download
 

packages/addons/browser/chrome/source/bin/chrome-start

@@ -16,7 +16,7 @@ if [ -e $ADDON_HOME/env ]; then
   . $ADDON_HOME/env
 fi
 
-# fix file permissons (zip packaging)
+# fix file permissions (zip packaging)
 chmod +x $ADDON_DIR/chrome-bin/chrome
 chmod 4755 $ADDON_DIR/chrome-bin/chrome-sandbox
 

packages/addons/driver/hdhomerun/source/bin/userspace-driver.sh

@@ -77,7 +77,7 @@ if [ -z "$(pidof userhdhomerun)" ]; then
 
         [ "$DVBMODE" = "auto" ] && DVBMODE=""
 
-        # remove setttings for this tuner
+        # remove settings for this tuner
         awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^tuner_type=|^use_full_name=|^disable=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $DVBHDHOMERUN_CONF_TMP >${DVBHDHOMERUN_CONF_TMP}-types
         mv ${DVBHDHOMERUN_CONF_TMP}-types $DVBHDHOMERUN_CONF_TMP
         echo "" >>$DVBHDHOMERUN_CONF_TMP

packages/addons/driver/sundtek-mediatv/source/bin/sundtek-mediatv.start

@@ -189,7 +189,7 @@ if [ -z "$(pidof mediasrv)" ]; then
 
       [ ! -f $KEYMAP ] && KEYMAP=""
 
-      # remove setttings for this tuner
+      # remove settings for this tuner
       awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^[^\[]|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
       mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
       echo "" >>$SUNDTEK_CONF_TMP

packages/addons/service/minidlna/source/config/minidlna.conf

@@ -34,7 +34,7 @@ inotify=yes
 enable_tivo=no
 
 # set this to beacon to use legacy broadcast discovery method
-# defauts to bonjour if avahi is available
+# defaults to bonjour if avahi is available
 tivo_discovery=bonjour
 
 # set this to strictly adhere to DLNA standards.

packages/databases/mariadb-connector-c/package.mk

@@ -8,7 +8,7 @@ PKG_LICENSE="LGPL"
 PKG_SITE="https://mariadb.org/"
 PKG_URL="https://github.com/mariadb-corporation/mariadb-connector-c/archive/v${PKG_VERSION}.tar.gz"
 PKG_DEPENDS_TARGET="toolchain zlib openssl"
-PKG_LONGDESC="mariadb-connector: library to conntect to mariadb/mysql database server"
+PKG_LONGDESC="mariadb-connector: library to connect to mariadb/mysql database server"
 PKG_BUILD_FLAGS="-gold"
 
 PKG_CMAKE_OPTS_TARGET="-DWITH_EXTERNAL_ZLIB=ON

packages/graphics/vulkan/glslang/package.mk

@@ -27,7 +27,7 @@ PKG_CMAKE_OPTS_COMMON="-DBUILD_EXTERNAL=ON \
                        -Wno-dev"
 
 post_unpack() {
-  # Enables SPIR-V optimzer capability needed for ENABLE_OPT CMake build option
+  # Enables SPIR-V optimizer capability needed for ENABLE_OPT CMake build option
   mkdir -p ${PKG_BUILD}/External/spirv-tools
     tar --strip-components=1 \
       -xf "${SOURCES}/spirv-tools/spirv-tools-$(get_pkg_version spirv-tools).tar.gz" \

packages/graphics/vulkan/vulkan-tools/package.mk

@@ -59,6 +59,6 @@ pre_make_target() {
 }
 
 post_makeinstall_target() {
-  # Clean up - two graphic test tools are superflous
+  # Clean up - two graphic test tools are superfluous
   safe_remove ${INSTALL}/usr/bin/vkcubepp
 }

packages/multimedia/nvidia-vaapi-driver/package.mk

@@ -8,4 +8,4 @@ PKG_LICENSE="MIT"
 PKG_SITE="https://github.com/elFarto/nvidia-vaapi-driver"
 PKG_URL="https://github.com/elFarto/nvidia-vaapi-driver/archive/v${PKG_VERSION}.tar.gz"
 PKG_DEPENDS_TARGET="toolchain libva nv-codec-headers gst-plugins-bad"
-PKG_LONGDESC="A VA-API implemention using NVIDIA's NVDEC"
+PKG_LONGDESC="A VA-API implementation using NVIDIA's NVDEC"

packages/readme.md

@@ -98,7 +98,7 @@ But not always. To select a specific toolchain, you only need to set the `PKG_TO
 | configure   | preconfigured [GNU Build System](https://en.wikipedia.org/wiki/GNU_Build_System) |
 | ninja       | [Ninja Build](https://ninja-build.org/) |
 | make        | [Makefile Based](https://www.gnu.org/software/make/) |
-| manual      | only runs self writen build steps, see [Functions](#functions) |
+| manual      | only runs self written build steps, see [Functions](#functions) |
 
 ###### Auto-Detection
 The auto-detections looks for specific files in the source path.
@@ -158,8 +158,8 @@ Full list of overwrittable functions.
 | pre_build_\[stage]      | yes    | Runs before of the start of the build |
 | pre_configure<br>pre_configure_\[stage]<br>configure_\[stage]<br>post_configure_\[stage] | yes | Configure the package for the compile. This is only relevant for toolchain, that supports it (e.g. meson, cmake, configure, manual) |
 | make_\[stage]<br>pre_make_\[stage]<br>post_make_\[stage] | yes | Build of the package |
-| makeinstall_\[stage]<br>pre_makeinstall_\[stage]<br>post_makeinstall_\[stage] | yes | Installation of the files in the correct pathes<br>host: TOOLCHAIN<br>target: SYSROOT and IMAGE<br>bootstrap and init: temporary destination
-| addon                   | -      | Copy all files together for addon creation. This is requiered for addons |
+| makeinstall_\[stage]<br>pre_makeinstall_\[stage]<br>post_makeinstall_\[stage] | yes | Installation of the files in the correct paths<br>host: TOOLCHAIN<br>target: SYSROOT and IMAGE<br>bootstrap and init: temporary destination
+| addon                   | -      | Copy all files together for addon creation. This is required for addons |
 | post_install_addon      | -      | Post processing of installed addon files in `${INSTALL}` directory |
 
 ## Directory structure
@@ -271,7 +271,7 @@ Issue | Level | Meaning |
     * new kernel driver
     * ...
 2. Find a place in the packages tree
-    * look into the package tree structure, which is generally self explaind.
+    * look into the package tree structure, which is generally self explanitory.
     * do not place it in an existing package (directory that includes a `package.mk`)
     * when you found a place, create a directory with the name of your package (use same value for `PKG_NAME`!!)
 3. Create an initial `package.mk`
@@ -295,7 +295,7 @@ PKG_LICENSE="LGPL"
 PKG_SITE="https://mariadb.org/"
 PKG_URL="https://github.com/MariaDB/mariadb-connector-c/archive/v$PKG_VERSION.tar.gz"
 PKG_DEPENDS_TARGET="toolchain zlib openssl"
-PKG_LONGDESC="mariadb-connector: library to conntect to mariadb/mysql database server"
+PKG_LONGDESC="mariadb-connector: library to connect to mariadb/mysql database server"
 PKG_BUILD_FLAGS="-gold"
 
 PKG_CMAKE_OPTS_TARGET="-DWITH_EXTERNAL_ZLIB=ON \

packages/security/openssl/package.mk

@@ -96,7 +96,7 @@ post_makeinstall_target() {
     ln -sf /run/libreelec/cacert.pem ${INSTALL}/etc/ssl/cacert.pem
     ln -sf /run/libreelec/cacert.pem ${INSTALL}/etc/ssl/cert.pem
 
-  # backwards comatibility
+  # backwards compatibility
   mkdir -p ${INSTALL}/etc/pki/tls
     ln -sf /run/libreelec/cacert.pem ${INSTALL}/etc/pki/tls/cacert.pem
   mkdir -p ${INSTALL}/etc/pki/tls/certs

packages/sysutils/busybox/scripts/apt-get

@@ -9,7 +9,7 @@ message="$message\n "
 message="$message\n 'apt-get' is a command to install, update and remove software which"
 message="$message\n is stored in a non local repo. 'apt-get' does nothing then connecting to such"
 message="$message\n repo, downloads the software, unpacks the software, updates a big"
-message="$message\n local database with all filepaths and other informations about the"
+message="$message\n local database with all filepaths and other information about the"
 message="$message\n installed software or removes or updates installed Software."
 message="$message\n "
 message="$message\n With LibreELEC it is not possible to change the system for security and"

packages/sysutils/busybox/scripts/createlog

@@ -104,7 +104,7 @@ mkdir -p $BASEDIR/$LOGDIR
     getlog_cmd cat /storage/.config/shutdown.sh
   fi
   getlog_cmd ls -laR /storage/.config/system.d
-  # note: we dont add .mount units here as they may contan
+  # note: we dont add .mount units here as they may contain
   # login credentials
   for i in /storage/.config/system.d/*.service ; do
     if [ -f "$i" ] && [ ! -L "$i" ]; then

packages/sysutils/busybox/scripts/fs-resize

@@ -20,7 +20,7 @@ if [ -e /storage/.please_resize_me ] ; then
   date -Iseconds >>$LOG
 
   # this sh** was never intended to be used
-  # on already installed and runing system
+  # on an already installed and running system
   if [ -d /storage/.kodi -o -d /storage/.config -o -d /storage/.cache ] ; then
     rm -f /storage/.please_resize_me
     sync

packages/sysutils/busybox/scripts/getedid

@@ -136,7 +136,7 @@ create_edid() {
 }
 
 intel_amd() {
-  # check which output is connnected:
+  # check which output is connected:
   counter=0
   for i in /sys/class/drm/*; do
     if [ "$(cat "$i"/status 2>/dev/null)" = "connected" ]; then

packages/sysutils/busybox/scripts/getedid-drm

@@ -20,7 +20,7 @@ delete_edid() {
 create_edid() {
   CONNECTORS=$(dump-active-edids -q)
   if [ $? -ne 0 -o -z "${CONNECTORS}" ]; then
-    echo "error: cannot detemine active connectors"
+    echo "error: cannot determine active connectors"
     exit 1
   fi
   create-edid-cpio -q