While tracking dev_base_lock users, I found decnet used it in
dnet_select_source(), but for a wrong purpose:
Writers only hold RTNL, not dev_base_lock, so readers must use RCU if
they cannot use RTNL.
Adds an rcu_head in struct dn_ifaddr and handle proper RCU management.
Adds __rcu annotation in dn_route as well.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bond_info_seq_start() uses a read_lock(&dev_base_lock) to make sure
device doesn’t disappear. Same goal can be achieved using RCU.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_base_lock is the legacy way to lock the device list, and is planned
to disappear. (writers hold RTNL, readers hold RCU lock)
Convert aoecmd_cfg_pkts() to RCU locking.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add suspend/resume support using default open/stop interface methods
to do hardware dependant operations.
On suspend, same low power state (soft power mode) will be kept, the
following blocks will be disabled:
- Internal PLL Clock
- Tx/Rx PHY
- MAC
- SPI Interface
Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QDIO is running independent from netdevice state. We are not
allowed to schedule NAPI in case the netdevice is not open.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a certain Hipersockets specific error code in the xmit path, the
qeth driver tries to invoke dev_queue_xmit again.
Commit 79640a4ca6 introduces a busylock
causing locking problems in case of re-invoked dev_queue_xmit by qeth.
This patch removes the attempts to retry packet sending with
dev_queue_xmit from the qeth driver.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fix a bug reported by backyes.
Right the first time pktgen's using queue_map that's not been initialized
by set_cur_queue_map(pkt_dev);
Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: Backyes <backyes@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
After e6484930d7: net: allocate tx queues in register_netdevice
These calls make net drivers oops at load time, so let's avoid people
git-bisect'ing known problems.
Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After e6484930d7: net: allocate tx queues in register_netdevice
It causes an Oops at skge_probe() time.
Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The type of FRAG6_CB(prev)->offset is int, skb->len is *unsigned* int,
and offset is int.
Without this patch, type conversion occurred to this expression, when
(FRAG6_CB(prev)->offset + prev->len) is less than offset.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The basic classifier keeps statistics but does not report it to user space.
This showed up when using basic classifier (with police) as a default catch
all on ingress; no statistics were reported.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing 'FirmwareVersion' attribute only covers the DSP firmware as
provided by Conexant; not the overall version of the device firmware. We
do want to be able to see the full version number too.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Add new ext4 inode tracepoints
ext4: Don't call sb_issue_discard() in ext4_free_blocks()
ext4: do not try to grab the s_umount semaphore in ext4_quota_off
ext4: fix potential race when freeing ext4_io_page structures
ext4: handle writeback of inodes which are being freed
ext4: initialize the percpu counters before replaying the journal
ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()
ext4: fix lazyinit hang after removing request
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
TTY: move .gitignore from drivers/char/ to drivers/tty/vt/
TTY: create drivers/tty/vt and move the vt code there
TTY: create drivers/tty and move the tty core files there
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6:
Staging: ath6kl: remove empty files that mess with 'distclean'
staging: ath6kl: Fixing the driver to use modified mmc_host structure
Staging: solo6x10: fix build problem
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: clkfwk: Fix up checkpatch warnings.
sh: make some needlessly global sh7724 clocks static
sh: add clk_round_parent() to optimize parent clock rate
sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.
sh: nommu: Support building without an uncached mapping.
sh: nommu: use 32-bit phys mode.
sh: mach-se: Fix up SE7206 no ioport build.
sh: intc: Update for single IRQ reservation helper.
sh: clkfwk: Fix up rate rounding error handling.
sh: mach-se: Rip out superfluous 7751 PIO routines.
sh: mach-se: Rip out superfluous 770x PIO routines.
sh: mach-edosk7705: Kill off machtype, consolidate board def.
sh: mach-edosk7705: update for this century, kill off PIO trapping.
sh: mach-se: Rip out superfluous 7206 PIO routines.
sh: mach-systemh: Kill off dead board.
sh: mach-snapgear: Kill off machtype, consolidate board def.
sh: mach-snapgear: Rip out superfluous PIO routines.
sh: mach-microdev: SuperIO-relative ioport mapping.
Commit 5c521830cf (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode. Unfortunately, this
no longer works, because in commit dd3932eddf (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.
For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:
BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b
https://bugzilla.kernel.org/show_bug.cgi?id=22302
Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com
It's not needed to sync the filesystem, and it fixes a lock_dep complaint.
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Use an atomic_t and make sure we don't free the structure while we
might still be submitting I/O for that page.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename). In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed. If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.
To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed. That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).
Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.
kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
Call Trace:
[<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
[<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
[<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
[<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
[<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
[<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
[<ffffffff81087910>] do_writepages+0x1c/0x25
[<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
[<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
[<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
[<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
[<ffffffff810c14a3>] evict+0x22/0x92
[<ffffffff810c1a3d>] iput+0x212/0x249
[<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
[<ffffffff810bdf6b>] d_kill+0x3d/0x5d
[<ffffffff810be613>] dput+0x13a/0x147
[<ffffffff810b990d>] sys_renameat+0x1b5/0x258
[<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
[<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
[<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
[<ffffffff810b99c6>] sys_rename+0x16/0x18
[<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>