The kernel has support for (nearly) every compression algorithm known to
man, each to handle some particular microscopic niche.
Unfortunately all of these always get compiled in if you want to support
INITRDs, and can be only disabled when CONFIG_EXPERT is set.
I don't see why I need to set EXPERT just to properly configure the initrd
compression algorithms, and not always include every possible algorithm
Usually the initrd is just compressed with gzip anyways, at least that's
true on all distributions I use.
Remove the dependencies for initrd compression on CONFIG_EXPERT.
Make the various options just default y, which should be good enough to
not break any previous configuration.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current debug levels are not optimal. Especially if one want to provoke
big numbers of faults(broken device simulator) then any verbose level will
produce giant numbers of identical logging messages. Let's add ratelimit
parameter for that purpose.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on ext2_direct_IO
Tested with O_DIRECT file open and sysbench/mariadb with 1% written
queries improvement (update_non_index test) on a volume created with
mkaffs.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.
set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset adds execveat(2) for x86, and is derived from Meredydd
Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528).
The primary aim of adding an execveat syscall is to allow an
implementation of fexecve(3) that does not rely on the /proc filesystem,
at least for executables (rather than scripts). The current glibc version
of fexecve(3) is implemented via /proc, which causes problems in sandboxed
or otherwise restricted environments.
Given the desire for a /proc-free fexecve() implementation, HPA suggested
(https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be
an appropriate generalization.
Also, having a new syscall means that it can take a flags argument without
back-compatibility concerns. The current implementation just defines the
AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be
added in future -- for example, flags for new namespaces (as suggested at
https://lkml.org/lkml/2006/7/11/474).
Related history:
- https://lkml.org/lkml/2006/12/27/123 is an example of someone
realizing that fexecve() is likely to fail in a chroot environment.
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered
documenting the /proc requirement of fexecve(3) in its manpage, to
"prevent other people from wasting their time".
- https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a
problem where a process that did setuid() could not fexecve()
because it no longer had access to /proc/self/fd; this has since
been fixed.
This patch (of 4):
Add a new execveat(2) system call. execveat() is to execve() as openat()
is to open(): it takes a file descriptor that refers to a directory, and
resolves the filename relative to that.
In addition, if the filename is empty and AT_EMPTY_PATH is specified,
execveat() executes the file to which the file descriptor refers. This
replicates the functionality of fexecve(), which is a system call in other
UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and
so relies on /proc being mounted).
The filename fed to the executed program as argv[0] (or the name of the
script fed to a script interpreter) will be of the form "/dev/fd/<fd>"
(for an empty filename) or "/dev/fd/<fd>/<filename>", effectively
reflecting how the executable was found. This does however mean that
execution of a script in a /proc-less environment won't work; also, script
execution via an O_CLOEXEC file descriptor fails (as the file will not be
accessible after exec).
Based on patches by Meredydd Luff.
Signed-off-by: David Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running FSX with direct I/O mode, fsx resulted in DATA past EOF issues.
fsx ./file2 -Z -r 4096 -w 4096
...
..
truncating to largest ever: 0x907c
fallocating to largest ever: 0x11137
truncating to largest ever: 0x2c6fe
truncating to largest ever: 0x2cfdf
fallocating to largest ever: 0x40000
Mapped Read: non-zero data past EOF (0x18628) page offset 0x629 is 0x2a4e
...
..
The reason being, it is doing a truncate down, but the zeroing does not
happen on the last block boundary when offset is not aligned. Even though
it calls truncate_setsize()->truncate_inode_pages()->
truncate_inode_pages_range() and considers the partial zeroout but it
retrieves the page using find_lock_page() - which only looks the page in
the cache. So, zeroing out does not happen in case of direct IO.
Make a truncate page based around block_truncate_page for FAT filesystem
and invoke that helper to zerout in case the offset is not aligned with
the blocksize.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When zbud is initialized through the zpool wrapper, pool->ops which
points to user-defined operations is always set regardless of whether it
is specified from the upper layer. This causes zbud_reclaim_page() to
iterate its loop for evicting pool pages out without any gain.
This patch sets the user-defined ops only when it is needed, so that
zbud_reclaim_page() can bail out the reclamation loop earlier if there
is no user-defined operations specified.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Sunae Seo <sunae.seo@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In current zram, we use DEVICE_ATTR() to define sys device attributes.
SO, we need to set (S_IRUGO | S_IWUSR) permission and other arguments
manually. Linux already provids the macro DEVICE_ATTR_[RW|RO|WO] to
define sys device attribute. It is simple and readable.
This patch uses kernel defined macro DEVICE_ATTR_[RW|RO|WO] to define
zram device attribute.
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In zs_create_pool(), prev_class is assigned (ZS_SIZE_CLASSES - 1) times.
And the prev_class only references to the previous size_class. So we do
not need unnecessary assignement.
This patch assigns *prev_class* when a new size_class structure is
allocated and uses prev_class to check whether the first class has been
allocated.
[akpm@linux-foundation.org: remove now-unused ZS_SIZE_CLASSES]
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In struct zram_table_entry, the element *value* contains obj size and obj
zram flags. Bit 0 to bit (ZRAM_FLAG_SHIFT - 1) represent obj size, and
bit ZRAM_FLAG_SHIFT to the highest bit of unsigned long represent obj
zram_flags. So the first zram flag(ZRAM_ZERO) should be from
ZRAM_FLAG_SHIFT instead of (ZRAM_FLAG_SHIFT + 1).
This patch fixes this cosmetic issue.
Also fix a typo, "page in now accessed" -> "page is now accessed"
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim
found zsmalloc even does not support allocating an obj with the size of
ZS_MAX_ALLOC_SIZE in some situations.
For example:
In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then:
ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by:
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE)
ZS_SIZE_CLASS_DELTA is 256 bytes
So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) /
ZS_SIZE_CLASS_DELTA + 1
= 256
In zs_create_pool(), the max size obj which can be allocated will be:
ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312
We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT
allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper
users we can do.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html
[2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html
This patch fixes this issue by dynamiclly calculating zs_size_classes when
module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the
max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it.
[akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability]
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kunmap_atomic should use virtual address getting by kmap_atomic.
However, some pieces of code in zsmalloc uses modified address, not the
one got by kmap_atomic for kunmap_atomic.
It's okay for working because zsmalloc modifies the address inner
PAGE_SIZE bounday so it works with current kmap_atomic's implementation.
But it's still fragile with potential changing of kmap_atomic so let's
correct it.
I got a subtle bug when I implemented a new feature of zsmalloc
(compaction) due to a link's mishandling (the link was over page
boundary). Although it was totally my mistake, it took a while to find
the cause because an unpredictable kmapped address was unmapped causing an
almost random crash.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mahendran Ganesh reported that zpool-enabled zsmalloc should not call
zpool_unregister_driver() from zs_init() if cpu notifier registration has
failed, because error handling is performed before we register the driver
via zpool_register_driver() call.
Factor out cpu notifier registration and unregistration code and fix
zs_init() error handling.
link: http://lkml.iu.edu//hypermail/linux/kernel/1411.1/04156.html
[akpm@linux-foundation.org: squash bogus gcc warning]
[akpm@linux-foundation.org: use __init and __exit]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen
Dmitry Monakhov
Fabian Frederick
Riku Voipio
Masanari Iida
David Drysdale
Namjae Jeon
Jan Kara
Heesub Shin
Markus Elfring
Mahendran Ganesh
Minchan Kim
Sergey Senozhatsky