* pci/host-altera:
PCI: altera: Add Altera PCIe MSI driver
PCI: altera: Add Altera PCIe host controller driver
ARM: Add msi.h to Kbuild
* pci/host-designware:
PCI: designware: Make "clocks" and "clock-names" optional DT properties
PCI: designware: Make driver arch-agnostic
ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
Revert "PCI: designware: Program ATU with untranslated address"
PCI: designware: Move calculation of bus addresses to DRA7xx
PCI: designware: Make "num-lanes" an optional DT property
PCI: designware: Require config accesses to be naturally aligned
PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
PCI: designware: Use exact access size in dw_pcie_cfg_read()
PCI: spear: Fix dw_pcie_cfg_read/write() usage
PCI: designware: Set up high part of MSI target address
PCI: designware: Make get_msi_addr() return phys_addr_t, not u32
PCI: designware: Implement multivector MSI IRQ setup
PCI: designware: Factor out MSI msg setup
PCI: Add msi_controller setup_irqs() method for special multivector setup
PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK
* pci/host-generic:
PCI: generic: Fix address window calculation for non-zero starting bus
PCI: generic: Pass starting bus number to pci_scan_root_bus()
PCI: generic: Allow multiple hosts with different map_bus() methods
arm64: dts: Drop linux,pci-probe-only from the Seattle DTS
powerpc/PCI: Fix lookup of linux,pci-probe-only property
PCI: generic: Fix lookup of linux,pci-probe-only property
of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only"
* pci/host-imx6:
PCI: imx6: Add PCIE_PHY_RX_ASIC_OUT_VALID definition
PCI: imx6: Return real error code from imx6_add_pcie_port()
* pci/host-iproc:
PCI: iproc: Fix header comment "Corporation" misspelling
PCI: iproc: Add outbound mapping support
PCI: iproc: Update PCIe device tree bindings
PCI: iproc: Improve link detection logic
PCI: iproc: Fix PCIe reset logic
PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM
PCI: iproc: Remove unused struct iproc_pcie.irqs[]
PCI: iproc: Fix code comment to match code
* pci/host-mvebu:
PCI: mvebu: Remove code restricting accesses to slot 0
PCI: mvebu: Add PCI Express root complex capability block
PCI: mvebu: Improve clock/reset handling
PCI: mvebu: Use gpio_desc to carry around gpio
PCI: mvebu: Use devm_kcalloc() to allocate an array
PCI: mvebu: Use gpio_set_value_cansleep()
PCI: mvebu: Split port parsing and resource claiming from port setup
PCI: mvebu: Fix memory leaks and refcount leaks
PCI: mvebu: Move port parsing and resource claiming to separate function
PCI: mvebu: Use port->name rather than "PCIe%d.%d"
PCI: mvebu: Report full node name when reporting a DT error
PCI: mvebu: Use for_each_available_child_of_node() to walk child nodes
PCI: mvebu: Use of_get_available_child_count()
PCI: mvebu: Use exact config access size; don't read/modify/write
PCI: mvebu: Return zero for reserved or unimplemented config space
* pci/host-rcar:
PCI: rcar: Fix I/O offset for multiple host bridges
PCI: rcar: Set root bus nr to that provided in DT
PCI: rcar: Remove dependency on ARM-specific struct hw_pci
PCI: rcar: Make PCI aware of the I/O resources
PCI: rcar: Build pcie-rcar.c only on ARM
PCI: rcar: Build pci-rcar-gen2.c only on ARM
* pci/host-tegra:
PCI: tegra: Wrap static pgprot_t initializer with __pgprot()
* pci/host-xgene:
PCI/MSI: xgene: Remove msi_controller assignment
Add Altera PCIe MSI driver. This soft IP supports a configurable number of
vectors, which is a DTS parameter.
[bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Layerscape PCIe has its own MSI implementation.
Register ls_pcie_msi_host_init() to avoid using DesignWare's MSI.
[bhelgaas: add comment]
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have
similar PCIe implementation. LUT is added to controller.
Add LS1043a and LS2080a support.
[bhelgaas: move unused field removal into separate patch, include DT update]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update)
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)
Removed unused node, dev, and bus fields from struct ls_pcie.
[bhelgaas: split into separate patch]
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Update the ls_add_pcie_port() signature to keep it consistent with the
other DesignWare-based host drivers.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For the LS1021a PCIe controller, some status registers are located in SCFG,
unlike other Layerscape devices.
Move SCFG-related code to ls1021_pcie_host_init() and rename
ls_pcie_link_up() to ls1021_pcie_link_up() because LTSSM status is also in
SCFG.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Layerscape PCIe controller supports root complex (RC) and endpoint (EP)
modes, which can be set by RCW.
If not in RC mode, return -ENODEV without claiming the controller.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ls_pcie_establish_link() does not do any real operation, except to wait for
the linkup establishment. In fact, this is not necessary. Moreover, each
PCIe controller not inserted device will increase the Linux startup time
about 200ms.
Remove ls_pcie_establish_link().
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously, dw_pcie_host_init() created the PCI host bridge with
pci_common_init_dev(), an ARM-specific function that supplies the ARM-
specific pci_sys_data structure as the PCI "sysdata".
Make pcie-designware.c arch-agnostic by reimplementing the functionality of
pci_common_init_dev() directly in dw_pcie_host_init().
Note that this changes the bridge sysdata from the ARM pci_sys_data to the
DesignWare pcie_port structure. This doesn't affect the ARM sysdata users
because they are all specific to non-DesignWare host bridges, which will
still have pci_sys_data.
[bhelgaas: changelog]
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Revert f4c55c5a3f ("PCI: designware: Program ATU with untranslated
address").
Note that dra7xx_pcie_host_init() now modifies pp->io_base, but we still
need the original value for dw_pcie_setup() in the path below, so this adds
a new io_base_tmp member. It will be removed later when dw_pcie_setup() is
removed.
dra7xx_add_pcie_port
dw_pcie_host_init
pp->io_base = range.cpu_addr
pp->io_base_tmp = range.cpu_addr # <-- added
pp->ops->host_init
dra7xx_pcie_host_init # ops->host_init
pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR # <-- modified
pci_common_init_dev(..., &dw_pci)
pcibios_init_hw
hw->setup
dw_pcie_setup # hw_pci.setup
pci_ioremap_io(..., pp->io_base_tmp) # <-- original addr required
[bhelgaas: changelog]
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Commit f4c55c5a3f ("PCI: designware: Program ATU with untranslated
address") added the calculation of PCI bus addresses in pcie-designware.c,
storing them in new fields added in struct pcie_port. This calculation is
done for every DesignWare user even though it only applies to DRA7xx.
Move the calculation of the bus addresses to the DRA7xx driver to allow the
rework of DesignWare to use the new DT parsing API.
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Currently "num-lanes" is read in dw_pcie_host_init(), but it is only used
if we call dw_pcie_setup_rc() while bringing up the link. If the link has
already been brought up by firmware, we need not call dw_pcie_setup_rc(),
and "num-lanes" is unnecessary.
Only complain about "num-lanes" if we actually need it and we didn't find a
valid value.
[bhelgaas: changelog]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add sanity checks on "addr" input parameter in dw_pcie_cfg_read() and
dw_pcie_cfg_write(). These checks make sure that accesses are aligned on
their size, e.g., a 4-byte config access is aligned on a 4-byte boundary.
[bhelgaas: changelog, set *val = 0 in failure case]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Callers of dw_pcie_cfg_read() and dw_pcie_cfg_write() previously had to
split the address into "addr" and "where". The callees assumed "addr" was
32-bit aligned (with zeros in the low two bits) and they used only the low
two bits of "where".
Accept the entire address in "addr" and drop the now-redundant "where"
argument. As an example, this replaces this:
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
*val = readb(addr + (where & 1));
with this:
int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val)
*val = readb(addr):
[bhelgaas: changelog, split access size change to separate patch]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
dw_pcie_cfg_write() uses the exact 8-, 16-, or 32-bit access size
requested, but dw_pcie_cfg_read() previously performed a 32-bit read and
masked out the bits requested.
Use the exact access size in dw_pcie_cfg_read(). For example, if we want
an 8-bit read, use readb() instead of using readl() and masking out the 8
bits we need. This makes it symmetric with dw_pcie_cfg_write().
[bhelgaas: split into separate patch, set *val = 0 in failure case]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The first argument of dw_pcie_cfg_read/write() is a 32-bit aligned address.
The second argument is the byte offset into a 32-bit word, and
dw_pcie_cfg_read/write() only look at the low two bits.
SPEAr13xx used dw_pcie_cfg_read() and dw_pcie_cfg_write() incorrectly: it
passed important address bits in the second argument, where they were
ignored.
Pass the complete 32-bit word address in the first argument and only the
2-bit offset into that word in the second argument.
Without this fix, SPEAr13xx host will never work with few buggy gen1 card
which connects with only gen1 host and also with any endpoint which would
generate a read request of more than 128 bytes.
[bhelgaas: changelog]
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.17+
Set up the high part of the MSI target address to allow the MSI target to
be above 4GB on 64bit and PAE systems.
[bhelgaas: changelog]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
On ARM64, setting the root bus number to -1 causes probe failure.
Moreover, we should use the bus number specified in the DT as we could have
multiple PCIe controllers with different bus ranges.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Linus Torvalds
Bjorn Helgaas
Ley Foon Tan
Zhou Wang
Minghuan Lian
Gabriele Paoloni
Lucas Stach
Phil Edworthy