Commit Graph

426806 Commits

Author SHA1 Message Date
Arnd Bergmann cda88c8be5 Merge tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu into next/drivers
Merge "mvebu drivers for v3.15" from Jason Cooper:

pull request #1:

 - mvebu mbus
    - use of_find_matching_node_and_match

 - rtc
    - use PTR_ERR_OR_ZERO in isl12057
    - work around issue in mv where date returned is 2038

 - kirkwood -> mach-mvebu
    - various Kconfig oneliners to allow building kirkwood in -mvebu/

pull request #2:

 - reset
    - re-use qnap-poweroff driver for Synology NASs

* tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu:
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  drivers: Enable building of Kirkwood drivers for mach-mvebu
  rtc: mv: reset date if after year 2038
  rtc: isl12057: use PTR_ERR_OR_ZERO to fix coccinelle warnings
  bus: mvebu-mbus: make use of of_find_matching_node_and_match

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 11:14:34 +01:00
Arnd Bergmann de65ded49e Merge tag 'socfpga_updates_for_3.15_v2' of git://git.rocketboards.org/linux-socfpga-next into next/drivers
Merge "SOCFPGA updates for 3.15 version 2" from Dinh Nguyen:

*Update SOCFPGA DTS to include ethernet, sd/mmc, and clock fixes
*Add stmmac ethernet glue layer
*Update socfpga_defconfig to include sd/mmc, and micrel_phy

* tag 'socfpga_updates_for_3.15_v2' of git://git.rocketboards.org/linux-socfpga-next:
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 10:26:40 +01:00
Olof Johansson a929478f67 Merge tag 'renesas-clock4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Fourth Round of Renesas ARM Based SoC Clock Updates for v3.15" from
Simon Horman:

r8a7791 (R-Car M2) SoC
* Correct SCIFA3-5 clocks

* tag 'renesas-clock4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-17 00:50:41 -07:00
Olof Johansson 5e79cc1f40 Merge tag 'renesas-clock3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Third Round of Renesas ARM Based SoC Clock Updates for v3.15" from Simon
Horman:

r7s72100 (RZ/A1H) SoC
* Correct bus clock calculation

* tag 'renesas-clock3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r7s72100: fix bus clock calculation

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-17 00:48:44 -07:00
Olof Johansson 7070008066 Merge tag 'renesas-clock2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Second Round of Renesas ARM Based SoC Clock Updates for v3.15" from
Simon Horman:

r8a7790 (R-Car H2) SoC
- Add sound SCU clock support

r8a7791 (R-Car M2) SoC
- Remove legacy clock aliases for DT devices

* tag 'renesas-clock2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: add sound SCU clock support
  ARM: shmobile: r8a7791: Remove legacy clock aliases for DT devices

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-17 00:47:52 -07:00
Olof Johansson 6020dd9b01 Merge tag 'renesas-clock-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Renesas ARM Based SoC Clock Updates for v3.15" from Simon Horman:

* r7s72100 SoC (RZ/A1H)
  - Add clock for SH Ethernet
  - Add RSPI clocks

* r8a7791 (R-Car M2)
  - Add QSPI and SDHI clocks

* r8a7790 (R-Car H2)
  - Add audio clock
  - Remove legacy DT clocks
  - Correct SYS DMAC clock defines

* tag 'renesas-clock-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove legacy r8a7790 DT clocks
  ARM: shmobile: Add r8a7791 legacy SDHI clocks
  ARM: shmobile: r8a7790: Correct SYS DMAC clock defines
  ARM: shmobile: r7s72100: Add clock for r7s72100-ether
  ARM: shmobile: r8a7791 clock: add QSPI clocks
  ARM: shmobile: r7s72100 clock: Add RSPI clocks for DT
  ARM: shmobile: r7s72100 clock: Add RSPI clocks
  ARM: shmobile: r8a7790: add audio clock
  ARM: shmobile: r8a7778: add audio clock in new style

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-17 00:36:37 -07:00
Geert Uytterhoeven a51a9d67ba ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
The MSTP clocks for SCIFA3-5 are MSTP1106-1108, not MSTP1105-1107

Also reinsert them at the correct position to preserve sort order.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-03-13 10:37:14 +09:00
Dinh Nguyen a5d6ac2a84 dts: socfpga: Add sysmgr node so the gmac can use to reference
commit[7e0b4cd dts: socfpga: Add DTS entry for adding the stmmac glue
layer for stmmac.] references the sysmgr through its phandle. This patch
adds the appropriate sysmgr node for the gmac to use.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-03-09 23:21:52 -05:00
Dinh Nguyen 9b931361ff dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
Introduce "altr,socfpga-dw-mshc" to enable Altera's SOCFPGA platform
specific implementation of the dw_mmc driver.

Also add the "syscon" binding to the "altr,sys-mgr" node. The clock
driver can use the syscon driver to toggle the register for the SD/MMC
clock phase shift settings.

Finally, fix an indentation error for the sysmgr node.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Chris Ball <chris@printf.net>
2014-03-09 23:11:35 -05:00
Olof Johansson 63261d76c8 Merge tag 'omap-for-v3.15/crossbar-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Merge OMAP crossbar support from Tony Lindgren:

Add support for GIC crossbar that routes interrupts on newer omaps.

Looks like people wanted these merged via the omap tree as it's
the only user for the GIC crossbar.

* tag 'omap-for-v3.15/crossbar-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: DRA: Enable Crossbar IP support for DRA7XX
  ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number
  DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-08 23:32:26 -08:00
Olof Johansson c37abe5ad2 Merge tag 'mvebu-watchdog-3.15-2' of git://git.infradead.org/linux-mvebu into next/drivers
mvebu watchdog driver changes for v3.15 (incremental #2)
- remove warnings by using %pa for phys_addr_t

* tag 'mvebu-watchdog-3.15-2' of git://git.infradead.org/linux-mvebu:
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-08 23:22:03 -08:00
Arnd Bergmann 1f6e3763d0 Merge tag 'armsoc/for-3.15/drivers' of git://github.com/broadcom/mach-bcm into next/drivers
Merge "ARM: mach-bcm: bcm281xx clock driver" from Matt Porter:

This pull request contains the Broadcom bcm281xx
clock driver series. This series is being merged
through the arm-soc tree because there is an
ordering dependency where the driver *must* be
merged before the related dts changes. This is
a result of the bcm281xx dts already containing
dummy fixed clock nodes that must be updated.

* tag 'armsoc/for-3.15/drivers' of git://github.com/broadcom/mach-bcm:
  clk: bcm281xx: don't disable unused peripheral clocks
  clk: bcm281xx: add initial clock framework support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-06 05:53:03 +01:00
Wolfram Sang d93023f81d ARM: shmobile: r7s72100: fix bus clock calculation
The picture in the datasheet is a little misleading, yet the divider of
the bus_clk is 1/3 and not 2/3.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-03-06 13:22:02 +09:00
Andrew Lunn 200c0a3e40 Power: Reset: Generalize qnap-poweroff to work on Synology devices.
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.

Signed-off-by: Ben Peddell <klightspeed@killerwolves.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04 03:48:41 +00:00
Dinh Nguyen f1ce1a99f2 dts: socfpga: Update clock entry to support multiple parents
The periph_pll and sdram_pll can have multiple parents. Update the device tree
to list all the possible parents for the PLLs. Add an entry for the the
f2s_sdram_ref_clk, which is a possible parent for the sdram_pll.

Also remove the clock-frequency entry in the f2s_periph_ref_clk, as this
property should be placed in dts file.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
2014-03-02 14:58:08 -06:00
Dinh Nguyen 73960387b2 ARM: socfpga: Update socfpga_defconfig
CONFIG_MICREL_PHY=y
CONFIG_EXT3_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_MMC=y
CONFIG_MMC_DW=y

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-03-02 14:58:07 -06:00
Dinh Nguyen 7e0b4cd062 dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
This patch adds the dts bindings documenation for the Altera SOCFPGA glue
layer for the Synopsys STMMAC ethernet driver.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
v3: Remove stray empty line at end of socfpga_cyclone5_socdk.dts
v2: Use the dwmac-sti as an example for a glue layer and split patch up
to have dts as a separate patch. Also cc dts maintainers since there is
a new binding.
2014-03-02 14:57:57 -06:00
Tony Lindgren 9594274201 Merge branch 'crossbar_3.14_rc1' of git://github.com/Sricharanti/sricharan into omap-for-v3.15/crossbar 2014-02-28 13:35:02 -08:00
Dinh Nguyen 2d237c06a4 net: stmmac: Add SOCFPGA glue driver
Like the STi series SOCs, Altera's SOCFPGA also needs a glue layer on top of the
Synopsys gmac IP.

This patch adds the platform driver for the glue layer which configures the IP
before the generic STMMAC driver takes over.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
v3: Remove stray empty line at end of dwmac-socfpga.c.
v2: Use the dwmac-sti as an example for a glue layer and split patch up
to have dts as a separate patch. Also cc dts maintainers since there is
a new binding.
2014-02-26 21:09:37 -06:00
Fabio Estevam edd9d3cffc watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
When building an ARM multi_v7_defconfig with LPAE option selected we get the
following build warning:

drivers/watchdog/orion_wdt.c:272:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'phys_addr_t' [-Wformat=]

Fix it by using %pa to print 'phys_addr_t'.

Reported-by: Olof's autobuilder <build@lixom.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-25 19:02:54 +00:00
Punit Agrawal dc4409c006 drivers: cci: Export CCI PMU revision
The event numbering changed between revision r0 and r1 of the CCI
PMU. Expose this to userspace to allow tooling to handle the
differences in event numbers.

Suggested-by: Drew Richardson <Drew.Richardson@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-25 19:36:17 +01:00
Punit Agrawal 6fb0c4a742 drivers: cci: Extend support to CCI revisions > r1p2
The driver queries the CCI IP revision to distinguish between r0 and r1
scheme for event numbers and currently supports upto version r1p2. To
minimise code churn every time there's a new version of the IP, assume
that event numbering doesn't change for revisions > r1p0 (which is
the case).

The driver will still need an update for future revisions that change
the event numbers.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-25 19:36:16 +01:00
Arnd Bergmann 23453853e4 Merge tag 'qcom-drivers-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/drivers
Merge "qcom driver changes for v3.15" from Kumar Gala:

We've split Qualcomm MSM support into legacy and multiplatform.  These
drivers are only relevant on the multiplatform supported SoCs so switch the
Kconfig depends to ARCH_QCOM.

* tag 'qcom-drivers-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  gpio: msm: switch Kconfig to ARCH_QCOM depends
  hwrng: msm: switch Kconfig to ARCH_QCOM depends
  power: reset: msm - switch Kconfig to ARCH_QCOM depends
  drm/msm: drop ARCH_MSM Kconfig depend
  tty: serial: msm: Enable building msm_serial for ARCH_QCOM
2014-02-25 18:10:57 +01:00
Arnd Bergmann f1a0d58e87 Merge branch 'qcom/cleanup' into next/drivers
* qcom/cleanup:
  ARM: qcom: Rename various msm prefixed functions to qcom
  clocksource: qcom: split building of legacy vs multiplatform support
  ARM: qcom: Split Qualcomm support into legacy and multiplatform
  clocksource: qcom: Move clocksource code out of mach-msm
  ARM: msm: kill off hotplug.c
  ARM: msm: Remove pen_release usage
  ARM: dts: msm: split out msm8660 and msm8960 soc into dts include

This cleanup branch is a dependency for the following qcom driver changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-25 18:09:27 +01:00
Arnd Bergmann a3f4fdf219 irqchip: VIC: export vic_init_cascaded
vic_init_cascaded is called by integrator impd1 code that can
be a loadable module, so the function has to be exported.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 18:01:43 +01:00