Followup patch renames skb->nfct and changes its type so add a helper to
avoid intrusive rename change later.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Next patch makes direct skb->nfct access illegal, reduce noise
in next patch by using accessors we already have.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should also toss nf_bridge_info, if any -- packet is leaving via
ip_local_out, also, this skb isn't bridged -- it is a locally generated
copy. Also this avoids the need to touch this later when skb->nfct is
replaced with 'unsigned long _nfct' in followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It is never accessed for reading and the only places that write to it
are the icmp(6) handlers, which also set skb->nfct (and skb->nfctinfo).
The conntrack core specifically checks for attached skb->nfct after
->error() invocation and returns early in this case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If something fails in nf_tables_table_enable(), it unregisters the
chains. But the rollback code is the same as nf_tables_table_disable()
almostly, except there is one counter check. Now create one wrapper
function to eliminate the duplicated codes.
Signed-off-by: Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The return value of nf_tables_table_lookup() is valid pointer or one
pointer error. There are two cases:
1) IS_ERR(table) is true, it would return the error or reset the
table as NULL, it is unnecessary to perform the latter check
"table != NULL".
2) IS_ERR(obj) is false, the table is one valid pointer. It is also
unnecessary to perform that check.
The nf_tables_newset() and nf_tables_newobj() have same logic codes.
In summary, we could move the block of condition check "table != NULL"
in the else block to eliminate the original condition checks.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After adding the following nft rule, then ping 224.0.0.1:
# nft add rule netdev t c pkttype host counter
The warning complain message will be printed out again and again:
WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \
nft_meta_get_eval+0x3fe/0x460 [nft_meta]
[...]
Call Trace:
<IRQ>
dump_stack+0x85/0xc2
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
nft_meta_get_eval+0x3fe/0x460 [nft_meta]
nft_do_chain+0xff/0x5e0 [nf_tables]
So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4,
convert it to PACKET_BROADCAST/MULTICAST according to the destination
address's type; For ipv6, convert it to PACKET_MULTICAST directly.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since there's no broadcast address in IPV6, so in ipv6 family, the
PACKET_LOOPBACK must be multicast packets, there's no need to check
it again.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In matches and targets that define a kernel-only tail to their
xt_match and xt_target data structs, add a field .usersize that
specifies up to where data is to be shared with userspace.
Performed a search for comment "Used internally by the kernel" to find
relevant matches and targets. Manually inspected the structs to derive
a valid offsetof.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert compat to copying entries, matches and targets one by one,
using the xt_match_to_user and xt_target_to_user helper functions.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert ebtables to copying entries, matches and targets one by one.
The solution is analogous to that of generic xt_(match|target)_to_user
helpers, but is applied to different structs.
Convert existing helpers ebt_make_XXXname helpers that overwrite
fields of an already copy_to_user'd struct with ebt_XXX_to_user
helpers that copy all relevant fields of the struct from scratch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert arptables to copying entries, matches and targets one by one,
using the xt_match_to_user and xt_target_to_user helper functions.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert ip6tables to copying entries, matches and targets one by one,
using the xt_match_to_user and xt_target_to_user helper functions.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert iptables to copying entries, matches and targets one by one,
using the xt_match_to_user and xt_target_to_user helper functions.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xt_entry_target, xt_entry_match and their private data may contain
kernel data.
Introduce helper functions xt_match_to_user, xt_target_to_user and
xt_data_to_user that copy only the expected fields. These replace
existing logic that calls copy_to_user on entire structs, then
overwrites select fields.
Private data is defined in xt_match and xt_target. All matches and
targets that maintain kernel data store this at the tail of their
private structure. Extend xt_match and xt_target with .usersize to
limit how many bytes of data are copied. The remainder is cleared.
If compatsize is specified, usersize can only safely be used if all
fields up to usersize use platform-independent types. Otherwise, the
compat_to_user callback must be defined.
This patch does not yet enable the support logic.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
implement sctp_error to let nf_conntrack_in validate crc32c on the packet
transport header. Assign skb->ip_summed to CHECKSUM_UNNECESSARY and return
NF_ACCEPT in case of successful validation; otherwise, return -NF_ACCEPT to
let netfilter skip connection tracking, like other protocols do.
Besides preventing corrupted packets from matching conntrack entries, this
fixes functionality of REJECT target: it was not generating any ICMP upon
reception of SCTP packets, because it was computing RFC 1624 checksum on
the packet and systematically mismatching crc32c in the SCTP header.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_conntrack needs to compute crc32c when dealing with SCTP packets.
Moreover, NF_NAT_PROTO_SCTP (currently selecting LIBCRC32C) can be enabled
only if conntrack support for SCTP is enabled. Therefore, move enabling of
kernel support for crc32c so that it is selected when NF_CT_PROTO_SCTP=y.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to xt_connbytes, user can match how many average bytes per packet
a connection has transferred so far.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We missed to add descriptions about NFT_CT_LABELS, NFT_CT_PKTS and
NFT_CT_BYTES, now add it.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
udplite nat was copied from udp nat, they are virtually 100% identical.
Not really surprising given udplite is just udp with partial csum coverage.
old:
text data bss dec hex filename
11606 1457 210 13273 33d9 nf_nat.ko
330 0 2 332 14c nf_nat_proto_udp.o
276 0 2 278 116 nf_nat_proto_udplite.o
new:
text data bss dec hex filename
11598 1457 210 13265 33d1 nf_nat.ko
640 0 4 644 284 nf_nat_proto_udp.o
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
udplite was copied from udp, they are virtually 100% identical.
This adds udplite tracker to udp instead, removes udplite module,
and then makes the udplite tracker builtin.
udplite will then simply re-use udp timeout settings.
It makes little sense to add separate sysctls, nowadays we have
fine-grained timeout policy support via the CT target.
old:
text data bss dec hex filename
1633 672 0 2305 901 nf_conntrack_proto_udp.o
1756 672 0 2428 97c nf_conntrack_proto_udplite.o
69526 17937 268 87731 156b3 nf_conntrack.ko
new:
text data bss dec hex filename
2442 1184 0 3626 e2a nf_conntrack_proto_udp.o
68565 17721 268 86554 1521a nf_conntrack.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal
Feng
Liping Zhang
Willem de Bruijn
Geliang Tang
Davide Caratti
Philippe Reynes