Commit Graph

157427 Commits

Author SHA1 Message Date
Dave Airlie adea4796cf drm/r600: get values from the passed in IB not the copy.
this avoids reading back the IB on AGP, also it avoids
the race where since we haven't fetched the page from the main IB
and written it to the gpu one, reading back fetches 0.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 14:23:47 +10:00
Amerigo Wang 31edd4824e drm: create gitignore file for radeon
Got lots of untracked files after compiling.
These files are generated, thus should be ignored by git.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:21 +10:00
Dave Airlie e3590096f7 drm/radeon/kms: remove unneeded master create/destroy functions.
We shouldn't need these at all in radeon kms mode.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:20 +10:00
Dave Airlie d50ba256b5 drm/kms: start adding command line interface using fb.
[note this requires an fb patch posted to linux-fbdev-devel already]

This uses the normal video= command line option to control the kms
output setup at boot time. It is used to override the autodetection
done by kms.

video= normally takes a framebuffer as the first parameter, in kms
it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output
connector is specified the mode string will apply to all connectors.

The mode specification used will match down the probed modes, and if
no mode is found it will add a CVT mode that matches.

video=1024x768 - all connectors match a 1024x768 mode or add a CVT on
video=VGA-1:1024x768, VGA-1 connector gets mode only.

The same strings as used in current fb modedb.c are used, except I've
added three more letters, e, D, d, e = enable, D = enable Digital,
d = disable, which allow a connector to be forced into a certain state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:20 +10:00
Dave Airlie f803303572 fb: change rules for global rules match.
Having a : should be enough 'fb:' isn't really useful
if the fb wants to a kms output ID.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:19 +10:00
Dave Airlie 513bcb4655 drm/radeon/kms: don't require up to 64k allocations. (v2)
This avoids needing to do a kmalloc > PAGE_SIZE for the main
indirect buffer chunk, it adds an accessor for all reads from
the chunk and caches a single page at a time for subsequent
reads.

changes since v1:
Use a two page pool which should be the most common case
a single packet spanning > PAGE_SIZE will be hit, but I'm
having trouble seeing anywhere we currently generate anything like that.
hopefully proper short page copying at end
added parser_error flag to set deep errors instead of having to test
every ib value fetch.
fixed bug in patch that went to list.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:18 +10:00
Dave Airlie 35e4b7af21 drm/radeon/kms: enable dac load detection by default.
when I added the property I forgot to enable it.

Thanks to soreau on #radeon for tracking it down.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:18 +10:00
Dave Airlie 4bbd497370 drm/radeon/kms: enable r600 tv outputs.
I never changed this back when I wrote tv-out support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:17 +10:00
Adam Jackson f066a17d9f drm/edid: Fix standard timing parse for EDID <= 1.2
Aspect ratio code of 0 means 1:1 before EDID 1.3.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:08 +10:00
Adam Jackson 93dc6c2b0d drm/edid: Detailed standard timing blocks have six timings, not five.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:06 +10:00
Adam Jackson 23425caeeb drm/edid: Ignore bad standard timings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:04 +10:00
Adam Jackson 083ae0560a drm/edid: const cleanup
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:03 +10:00
Andre Maasikas 5b31aee9d7 drm/radeon/r600: set correct pitch for 4 byte copy
[agd5f: also fix the non-kms path]

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
2009-09-23 10:21:06 +10:00
Dave Airlie c214271563 drm/radeon: consolidate family flags used in pciids.
having these separate was pointless and introduced a bug when
one got updated without the other.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-23 10:21:00 +10:00
Alex Deucher aadd4e1745 drm/radeon: some r420s have a CP race with the DMA engine.
This patch makes sure the CP doesn't DMA do VRAM while 2D
is active by inserting a CP resync token.

todo: port to kms.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 14:48:45 +10:00
Alex Deucher 5a6e9f9658 drm/radeon/r600/kms: rv670 is not DCE3
RV670 was using the wrong modesetting code.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 14:47:41 +10:00
Dave Airlie 18a4cd2e91 drm/radeon/kms: r420 idle after programming GA_ENHANCE
https://bugs.freedesktop.org/show_bug.cgi?id=24041

The idle allows rs690 to startup properly.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 14:15:10 +10:00
Dave Airlie fe62e1a45d drm/radeon/kms: more fixes to rv770 suspend/resume path.
This resumes my
RV730PRO (4650)
RV770 (4850)
fine.

Still researching the RV4550 (RV710), resumes without X fine.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 14:14:59 +10:00
Dave Airlie 4153e584ee drm/radeon/kms: more alignment for rv770.c with r600.c
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 18:41:24 +10:00
Dave Airlie 9052aa2458 drm/radeon/kms: rv770 blit init called too late.
re-align with r600 code, to init blit earlier.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 18:34:53 +10:00
Dave Airlie fc30b8efbe drm/radeon/kms: move around new init path code to avoid posting at init
We really don't want to post the card at init, it takes a relatively
long time and isn't required, so split the resume path into
a startup path called by both init/resume and separate resume
entry point to do posting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:17:42 +10:00
Dave Airlie bc1a631e51 drm/radeon/r600: fix some issues with suspend/resume.
a) don't zero gart table on gart enable
b) move pinning shader object into resume path
c) unpin shader object on suspend
d) set cp ready to false after cp shutdown on suspend.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:17:30 +10:00
Dave Airlie 698443d9ec drm/radeon/kms: disable VGA rendering engine before taking over VRAM
Before we use any of VRAM, we need to disable the VGA rendering
engine, this render text mode into a graphical framebuffer
for scanout, however it does this on vblank, and can end up
overwriting the GART table and r600 shader objects.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:13:11 +10:00
Michel Dänzer 5e6dde7ec2 drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
Someone on IRC reported problems after commit
95a8f1bf4f ('drm/radeon/kms: Move
radeon_clocks_init() call back after getting VRAM info.'). And indeed, at least
some ASIC vram_info hooks use the clock info obtained by
radeon_get_clock_info(). So, move that call out of radeon_clocks_init(), ahead
of the radeon_vram_info() call.

[airlied - fixup missing r600/rv770 calls]

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix get clock info calls for r600/rv770 init path.

These were missed when it got split out.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:04:10 +10:00
Dave Airlie 445282db9e drm/radeon/kms: add initial connector properties
This adds:
coherent mode: TMDS coherent mode for atom cards.
scaling mode: LVDS scaler mode
load detect: DAC load detection, DVI-I, VGA, TV
tmds pll: legacy TMDS pll selection
tv standard: TV standard selection.

for later: other TV ones? dvi subconnector selection using std prop

[contains fixes pointed out on dri-devel for atom bios mixups
 by Michel]

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:02:00 +10:00