Destination buffer already has offset added. So, don't add offset
again.
Fetch actual size of configured OBQ from hardware, instead of using
hardcoded value.
Fixes: 7c075ce221 ("cxgb4: collect IBQ and OBQ dumps")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lipeng says:
====================
net: hns3: fix some bugs for HNS3 driver
This patchset fixes some bugs reported by Hisilicon test team.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When reusing a command description read from HW, driver should set
IN_VLD bit, WR bit and NO_INTR bit. If IN_VLD bit and NO_INTR bit
are not set, the command fails and driver prints error message:
[ 135.261284] hns3 0000:7d:00.0: cmdq execute failed for get_mac_vlan_cmd_status,status=2.
[ 135.270983] hns3 0000:7d:00.0: add mac addr failed for cmd_send, ret =-5.
This patch fixes the bug.
Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HNS3 driver initialize hdev->roce_client and vport->roce.client in
hclge_init_client_instance, and need set hdev->roce_client and
vport->roce.client NULL.
If do not set them NULL when uninit, it will fail in the scene:
insmod hns3.ko, hns-roce.ko, hns-roce-hw-v3.ko successfully, but
rmmod hns3.ko after rmmod hns-roce-hw-v2.ko and hns-roce.ko.
This patch fixes the issue.
Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roce driver works base on HNS3 driver.If insmod Roce driver before
NIC driver there is a error because do not check nic_client. This patch
adds nic_client check when initialize roce base information.
Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SC bits of TX BD mean switch control. For this area, value 0
indicates no switch control, the packet is routed according to the
forwarding table. Value 1 indicates that the packet is transmitted
to the network bypassing the forwarding table.
As HNS3 driver need support VF later, VF conmunicate with its own
PF need forwarding table. This patch sets SC bits of TX BD 0 and use
forwarding table.
Fixes: 76ad4f0 (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot says:
====================
net: dsa: don't unmask port bitmaps
DSA has several bitmaps to store the type of ports: cpu_port_mask,
dsa_port_mask and enabled_port_mask. But the code is inconsistently
unmasking them.
The legacy code tries to unmask cpu_port_mask and dsa_port_mask but
skips enabled_port_mask.
The new bindings unmasks cpu_port_mask and enabled_port_mask but skips
dsa_port_mask.
In fact there is no need to unmask them because we are in the error
path, and they won't be used after. Instead of fixing the unmasking,
simply remove them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The unapply functions are called on the error path.
As for dsa_port_mask, enabled_port_mask and cpu_port_mask won't be used
after so there's no need to unmask the corresponding port bit from them.
This makes dsa_cpu_port_unapply() and dsa_dsa_port_unapply() identical,
which can be factorized later.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The legacy code does not unmask the cpu_port_mask and dsa_port_mask as
stated. But this is done on the error path and those masks won't be used
after that. So instead of fixing the bit operation, simply remove it.
Fixes: 83c0afaec7 ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger says:
====================
net: bcmgenet: start/stop sequence refinement
This commit set is the result of an investigation into an issue that
occurred when bringing the interface up and down repeatedly with an
external 100BASE-T PHY. In some cases the MAC would experience mass
receive packet duplication that could in rare cases lead to a stall
from overflow. The fix for this is contained in the third commit.
The first 3 commits represent bug fixes that should be applied to the
net repository and are candidates for backporting to stable releases.
The remaining commits are enhancements which is why the set is being
submitted to net-next but they are implemented on top of the fixes.
The first fix is provided as justification for why the set isn't
split between a net submission and a net-next submission.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the software reset of the PHY has been removed it is no
longer necessary to retain a private pointer to the phydev for
use when the PHY is detached (which isn't generally safe anyway).
The driver now uses the phydev member attached to the net_device.
For ethtool commands that have a PHY component, an explicit check
is made to prevent accessing an invalid phydev pointer when one
is not attached (e.g. interface is down).
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit f7d72996e222 ("net: bcmgenet: enable loopback during
UniMAC sw_reset") it is no longer necessary to force the software
reset of the internal EPHY before resetting the UniMAC to ensure a
clean reset.
Therefore this commit reverts commit 5dbebbb44a ("net: bcmgenet:
Software reset EPHY after power on").
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the ring locks are not used in a hard IRQ context it is often
not necessary to disable global IRQs while waiting on a lock.
Using less restrictive lock and unlock calls improves the real-time
responsiveness of the system.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit consolidates more common functionality from
bcmgenet_close and bcmgenet_suspend into bcmgenet_netif_stop and
modifies the start and stop sequences to better suit the design
of the GENET hardware.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the NAPI interrupts are basically ignored when NAPI is
disabled we don't need to mask them within the functions
bcmgenet_disable_tx_napi() and bcmgenet_disable_rx_napi().
So wait until all NAPI instances are disabled and mask all of the
bcmgenet driver interrupts together in bcmgenet_netif_stop().
The interrupts can still be enabled in the functions
bcmgenet_enable_tx_napi() and bcmgenet_enable_rx_napi(), but use
the ring context int_enable() method to keep the functionality
consistent and the code cleaner.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since each ring has its own NAPI instance it might as well be
initialized along with the other ring context.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is necessary for the UniMAC to be clocked at least 5 cycles
while the sw_reset is asserted to ensure a clean reset.
It was discovered that this condition was not being met when
connected to an external RGMII PHY that disabled the Rx clock in
the Power Save state.
This commit modifies the reset_umac function to place the (RG)MII
interface into a local loopback mode where the Rx clock comes
from the GENET sourced Tx clk during the sw_reset to ensure the
presence and stability of the clock.
In addition, it turns out that the sw_reset of the UniMAC is not
self clearing, but this was masked by a bug in the timeout code.
The sw_reset is now explicitly cleared by zeroing the UMAC_CMD
register before returning from reset_umac which makes it no
longer necessary to do so in init_umac and makes the clearing of
CMD_TX_EN and CMD_RX_EN by umac_enable_set redundant. The
timeout code (and its associated bug) are removed so reset_umac
no longer needs to return a result, and that means init_umac
that calls reset_umac does not need to as well.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bcmgenet_dma_teardown is called from bcmgenet_fini_dma it ends
up getting called twice from the bcmgenet_close and bcmgenet_suspend
functions (once directly and once inside the bcmgenet_fini_dma call).
This commit removes the call from bcmgenet_fini_dma and ensures that
bcmgenet_dma_teardown is called before bcmgenet_fini_dma in all paths
of execution.
Fixes: 4a0c081eff ("net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As noted in the net-next submission for GENETv5 support [1], there
were merge conflicts with an earlier net submission [2] that had not
yet found its way to the net-next repository.
Unfortunately, when the branches were merged the conflicts were not
correctly resolved. This commit attempts to correct that.
[1] https://lkml.org/lkml/2017/3/13/1145
[2] https://lkml.org/lkml/2017/3/9/890
Fixes: 101c431492 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 635b8c8ecd ("tap: Renaming tap related APIs, data structures,
macros") captured all the tap related fields into a new struct tap_dev.
However, it failed to remove those fields from struct macvlan_dev.
Those fields are currently unused and must be removed. While there
I moved the comment for MAX_TAP_QUEUES to the right place.
Fixes: 635b8c8ecd (tap: Renaming tap related APIs, data structures, macros)
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following warning was reported by syzbot on Oct 24. 2017:
KASAN: slab-out-of-bounds Read in tipc_nametbl_lookup_dst_nodes
This is a harmless bug, but we still want to get rid of the warning,
so we swap the two conditions in question.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: David Howells <dhowells@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy
David S. Miller
Lipeng
Vivien Didelot
Doug Berger
Girish Moodalbail
Steven J. Hill
Jon Maloy
Kees Cook