When parsing SRAT, all memory ranges are added into numa_meminfo. In
numa_init(), before entering numa_cleanup_meminfo(), all possible memory
ranges are in numa_meminfo. And numa_cleanup_meminfo() removes all
ranges over max_pfn or empty.
But, this only works if the nodes are continuous. Let's have a look at
the following example:
We have an SRAT like this:
SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x1ffffffffff]
SRAT: Node 1 PXM 1 [mem 0x20000000000-0x3ffffffffff]
SRAT: Node 4 PXM 2 [mem 0x40000000000-0x5ffffffffff] hotplug
SRAT: Node 5 PXM 3 [mem 0x60000000000-0x7ffffffffff] hotplug
SRAT: Node 2 PXM 4 [mem 0x80000000000-0x9ffffffffff] hotplug
SRAT: Node 3 PXM 5 [mem 0xa0000000000-0xbffffffffff] hotplug
SRAT: Node 6 PXM 6 [mem 0xc0000000000-0xdffffffffff] hotplug
SRAT: Node 7 PXM 7 [mem 0xe0000000000-0xfffffffffff] hotplug
On boot, only node 0,1,2,3 exist.
And the numa_meminfo will look like this:
numa_meminfo.nr_blks = 9
1. on node 0: [0, 60000000]
2. on node 0: [100000000, 20000000000]
3. on node 1: [20000000000, 40000000000]
4. on node 4: [40000000000, 60000000000]
5. on node 5: [60000000000, 80000000000]
6. on node 2: [80000000000, a0000000000]
7. on node 3: [a0000000000, a0800000000]
8. on node 6: [c0000000000, a0800000000]
9. on node 7: [e0000000000, a0800000000]
And numa_cleanup_meminfo() will merge 1 and 2, and remove 8,9 because the
end address is over max_pfn, which is a0800000000. But 4 and 5 are not
removed because their end addresses are less then max_pfn. But in fact,
node 4 and 5 don't exist.
In a word, numa_cleanup_meminfo() is not able to handle holes between nodes.
Since memory ranges in node 4 and 5 are in numa_meminfo, in
numa_register_memblks(), node 4 and 5 will be mistakenly set to online.
If you run lscpu, it will show:
NUMA node0 CPU(s): 0-14,128-142
NUMA node1 CPU(s): 15-29,143-157
NUMA node2 CPU(s):
NUMA node3 CPU(s):
NUMA node4 CPU(s): 62-76,190-204
NUMA node5 CPU(s): 78-92,206-220
In this patch, we use memblock_overlaps_region() to check if ranges in
numa_meminfo overlap with ranges in memory_block. Since memory_block
contains all available memory at boot time, if they overlap, it means the
ranges exist. If not, then remove them from numa_meminfo.
After this patch, lscpu will show:
NUMA node0 CPU(s): 0-14,128-142
NUMA node1 CPU(s): 15-29,143-157
NUMA node4 CPU(s): 62-76,190-204
NUMA node5 CPU(s): 78-92,206-220
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is based on the shmem version, but it has diverged quite a bit. We
have no swap to worry about, nor the new file sealing. Add
synchronication via the fault mutex table to coordinate page faults,
fallocate allocation and fallocate hole punch.
What this allows us to do is move physical memory in and out of a
hugetlbfs file without having it mapped. This also gives us the ability
to support MADV_REMOVE since it is currently implemented using
fallocate(). MADV_REMOVE lets madvise() remove pages from the middle of
a hugetlbfs file, which wasn't possible before.
hugetlbfs fallocate only operates on whole huge pages.
Based on code by Dave Hansen.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify truncate_hugepages() to take a range of pages (start, end)
instead of simply start. If an end value of LLONG_MAX is passed, the
current "truncate" functionality is maintained. Existing callers are
modified to pass LLONG_MAX as end of range. By keying off end ==
LLONG_MAX, the routine behaves differently for truncate and hole punch.
Page removal is now synchronized with page allocation via faults by
using the fault mutex table. The hole punch case can experience the
rare region_del error and must handle accordingly.
Add the routine hugetlb_fix_reserve_counts to fix up reserve counts in
the case where region_del returns an error.
Since the routine handles more than just the truncate case, it is
renamed to remove_inode_hugepages(). To be consistent, the routine
truncate_huge_page() is renamed remove_huge_page().
Downstream of remove_inode_hugepages(), the routine
hugetlb_unreserve_pages() is also modified to take a range of pages.
hugetlb_unreserve_pages is modified to detect an error from region_del and
pass it back to the caller.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fallocate hole punch will want to remove a specific range of pages. The
existing region_truncate() routine deletes all region/reserve map
entries after a specified offset. region_del() will provide this same
functionality if the end of region is specified as LONG_MAX. Hence,
region_del() can replace region_truncate().
Unlike region_truncate(), region_del() can return an error in the rare
case where it can not allocate memory for a region descriptor. This
ONLY happens in the case where an existing region must be split.
Current callers passing LONG_MAX as end of range will never experience
this error and do not need to deal with error handling. Future callers
of region_del() (such as fallocate hole punch) will need to handle this
error.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlbfs is used today by applications that want a high degree of
control over huge page usage. Often, large hugetlbfs files are used to
map a large number huge pages into the application processes. The
applications know when page ranges within these large files will no
longer be used, and ideally would like to release them back to the
subpool or global pools for other uses. The fallocate() system call
provides an interface for preallocation and hole punching within files.
This patch set adds fallocate functionality to hugetlbfs.
fallocate hole punch will want to remove a specific range of pages.
When pages are removed, their associated entries in the region/reserve
map will also be removed. This will break an assumption in the
region_chg/region_add calling sequence. If a new region descriptor must
be allocated, it is done as part of the region_chg processing. In this
way, region_add can not fail because it does not need to attempt an
allocation.
To prepare for fallocate hole punch, create a "cache" of descriptors
that can be used by region_add if necessary. region_chg will ensure
there are sufficient entries in the cache. It will be necessary to
track the number of in progress add operations to know a sufficient
number of descriptors reside in the cache. A new routine region_abort
is added to adjust this in progress count when add operations are
aborted. vma_abort_reservation is also added for callers creating
reservations with vma_needs_reservation/vma_commit_reservation.
[akpm@linux-foundation.org: fix typo in comment, use more cols]
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pair of get/set_freepage_migratetype() functions are used to cache
pageblock migratetype for a page put on a pcplist, so that it does not
have to be retrieved again when the page is put on a free list (e.g.
when pcplists become full). Historically it was also assumed that the
value is accurate for pages on freelists (as the functions' names
unfortunately suggest), but that cannot be guaranteed without affecting
various allocator fast paths. It is in fact not needed and all such
uses have been removed.
The last remaining (but pointless) usage related to pages of freelists
is in move_freepages(), which this patch removes.
To prevent further confusion, rename the functions to
get/set_pcppage_migratetype() and expand their description. Since all
the users are now in mm/page_alloc.c, move the functions there from the
shared header.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Seungho Park <seungho1.park@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The __test_page_isolated_in_pageblock() is used to verify whether all
pages in pageblock were either successfully isolated, or are hwpoisoned.
Two of the possible state of pages, that are tested, are however bogus
and misleading.
Both tests rely on get_freepage_migratetype(page), which however has no
guarantees about pages on freelists. Specifically, it doesn't guarantee
that the migratetype returned by the function actually matches the
migratetype of the freelist that the page is on. Such guarantee is not
its purpose and would have negative impact on allocator performance.
The first test checks whether the freepage_migratetype equals
MIGRATE_ISOLATE, supposedly to catch races between page isolation and
allocator activity. These races should be fixed nowadays with
51bb1a4093 ("mm/page_alloc: add freepage on isolate pageblock to correct
buddy list") and related patches. As explained above, the check
wouldn't be able to catch them reliably anyway. For the same reason
false positives can happen, although they are harmless, as the
move_freepages() call would just move the page to the same freelist it's
already on. So removing the test is not a bug fix, just cleanup. After
this patch, we assume that all PageBuddy pages are on the correct
freelist and that the races were really fixed. A truly reliable
verification in the form of e.g. VM_BUG_ON() would be complicated and
is arguably not needed.
The second test (page_count(page) == 0 && get_freepage_migratetype(page)
== MIGRATE_ISOLATE) is probably supposed (the code comes from a big
memory isolation patch from 2007) to catch pages on MIGRATE_ISOLATE
pcplists. However, pcplists don't contain MIGRATE_ISOLATE freepages
nowadays, those are freed directly to free lists, so the check is
obsolete. Remove it as well.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Seungho Park <seungho1.park@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CMA reserved memory is not part of total reserved memory. Currently
when we print the total reserve memory it considers cma as part of
reserve memory and do minus of totalcma_pages from reserved, which is
wrong. In cases where total reserved is less than cma reserved we will
get negative values & while printing we print as unsigned and we will
get a very large value.
Below is the show mem output on X86 ubuntu based system where CMA
reserved is 100MB (25600 pages) & total reserved is ~40MB(10316 pages).
And reserve memory shows a large value because of this bug.
Before:
[ 127.066430] 898908 pages RAM
[ 127.066432] 671682 pages HighMem/MovableOnly
[ 127.066434] 4294952012 pages reserved
[ 127.066436] 25600 pages cma reserved
After:
[ 44.663129] 898908 pages RAM
[ 44.663130] 671682 pages HighMem/MovableOnly
[ 44.663130] 10316 pages reserved
[ 44.663131] 25600 pages cma reserved
Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Danesh Petigara <dpetigara@broadcom.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sk_prot->proto_cgroup is allowed to return NULL but sock_update_memcg
doesn't check for NULL. The function relies on the mem_cgroup_is_root
check because we shouldn't get NULL otherwise because mem_cgroup_from_task
will always return !NULL.
All other callers are checking for NULL and we can safely replace
mem_cgroup_is_root() check by cg_proto != NULL which will be more
straightforward (proto_cgroup returns NULL for the root memcg already).
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only user is cgwb_bdi_init and that one depends on
CONFIG_CGROUP_WRITEBACK which in turn depends on CONFIG_MEMCG so it
doesn't make much sense to definte an empty stub for !CONFIG_MEMCG.
Moreover ERR_PTR(-EINVAL) is ugly and would lead to runtime crashes if
used in unguarded code paths. Better fail during compilation.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup structure is defined in mm/memcontrol.c currently which means
that the code outside of this file has to use external API even for
trivial access stuff.
This patch exports mm_struct with its dependencies and makes some of the
exported functions inlines. This even helps to reduce the code size a bit
(make defconfig + CONFIG_MEMCG=y)
text data bss dec hex filename
12355346 1823792 1089536 15268674 e8fb42 vmlinux.before
12354970 1823792 1089536 15268298 e8f9ca vmlinux.after
This is not much (370B) but better than nothing.
We also save a function call in some hot paths like callers of
mem_cgroup_count_vm_event which is used for accounting.
The patch doesn't introduce any functional changes.
[vdavykov@parallels.com: inline memcg_kmem_is_active]
[vdavykov@parallels.com: do not expose type outside of CONFIG_MEMCG]
[akpm@linux-foundation.org: memcontrol.h needs eventfd.h for eventfd_ctx]
[akpm@linux-foundation.org: export mem_cgroup_from_task() to modules]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"memcg: export struct mem_cgroup" will add includes into
linux/memcontrol.h which lead to further header dependency issues as
reported by Guenter Roeck:
In file included from include/linux/highmem.h:7:0,
from include/linux/bio.h:23,
from include/linux/writeback.h:192,
from include/linux/memcontrol.h:30,
from include/linux/swap.h:8,
from ./arch/sparc/include/asm/pgtable_32.h:17,
from ./arch/sparc/include/asm/pgtable.h:6,
from arch/sparc/kernel/traps_32.c:23:
include/linux/mm.h: In function 'is_vmalloc_addr':
include/linux/mm.h:371:17: error: 'VMALLOC_START' undeclared (first use in this function)
include/linux/mm.h:371:17: note: each undeclared identifier is reported only once for each function it appears in
include/linux/mm.h:371:41: error: 'VMALLOC_END' undeclared (first use in this function)
include/linux/mm.h: In function 'maybe_mkwrite':
include/linux/mm.h:556:3: error: implicit declaration of function 'pte_mkwrite'
The issue is that pgtable_32.h depends on swap.h to get swap_entry_t but
that goes all the way down to linux/mm.h which wants to have VMALLOC_*
which is defined later in pgtable_32.h, though.
swap_entry_t is defined in include/mm_types.h so it should be sufficient
to include this header without more dependencies.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dma_pool_destroy() does not tolerate a NULL dma_pool pointer argument and
performs a NULL-pointer dereference. This requires additional attention
and effort from developers/reviewers and forces all dma_pool_destroy()
callers to do a NULL check
if (pool)
dma_pool_destroy(pool);
Or, otherwise, be invalid dma_pool_destroy() users.
Tweak dma_pool_destroy() and NULL-check the pointer there.
Proposed by Andrew Morton.
Link: https://lkml.org/lkml/2015/6/8/583
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mempool_destroy() does not tolerate a NULL mempool_t pointer argument and
performs a NULL-pointer dereference. This requires additional attention
and effort from developers/reviewers and forces all mempool_destroy()
callers to do a NULL check
if (pool)
mempool_destroy(pool);
Or, otherwise, be invalid mempool_destroy() users.
Tweak mempool_destroy() and NULL-check the pointer there.
Proposed by Andrew Morton.
Link: https://lkml.org/lkml/2015/6/8/583
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aristeu Rozanski
Tang Chen
Mike Kravetz
Vlastimil Babka
Vishnu Pratap Singh
Michal Hocko
Michal Hocko
Tejun Heo
Sergey Senozhatsky