9556ac2fa1
Fix get_saved_sp for 64bit address space. Simplify set_save_sp.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:39 +01:00
4552074577
IP30 Identification.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:39 +01:00
85f14bf2cb
... and it isn't a canonicalized triplet but just the n-plet used to
...
configure gcc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:38 +01:00
73f74e23a6
Grep deesn't like shell-style matching...
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:37 +01:00
f425a6dce5
Hack to make compiles for the other endianness easier.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:37 +01:00
6e760c8dae
Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:37 +01:00
ca4973dd55
Don't redeclare ll_local_timer_interrupt.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:36 +01:00
50bd2c72ca
Brian Murphy says:
...
this fixes Lasat pci to work with multi-function devices by assigning
the correct values based on pin number (instead of ignoring them).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:36 +01:00
ec125c129e
Code cleanup, thanks Brian Murphy.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
Signed-off-by: Thiemo Seufer <ths@networkno.de >
2005-10-29 19:31:35 +01:00
a5fc9c0bbe
Use physical addresses at the interface level, letting drivers remap
...
them as appropriate.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:35 +01:00
7d7ee22121
Prevent 64-bit constants from being cropped to 32 bits when used in C code.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:34 +01:00
2c93e12cfe
Avoid tlbw* hazards for the R4600/R4700/R5000.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:34 +01:00
c3455b0efc
Inline ioremap() calls for constant addresses that map to KSEG1.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:34 +01:00
c134a5ecdb
Avoid defining variables in the middle of a block which breaks older
...
compilers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:33 +01:00
7222424e2e
More .set to keep 32-bit processors happy.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:33 +01:00
4c0a2d4275
Fix the diagnostic dump for the XTLB refill handler.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:32 +01:00
41986a6e7e
Fix a diagnostic message.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:32 +01:00
362b1d546d
Conversion to plat_setup() for TX4927 also.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:32 +01:00
01d42abdf3
Using get_nasid() to find the console node will blow up nicely if
...
called on a another node than the console node, so use the master_nasid
instead and in the unlikely case that one isn't initialized yet, fall
back to get_nasid().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:31 +01:00
c4559f67b7
Always use ".set mips3" rather than select between "mips2" or "mips3"
...
for assembling ll/sc sequences to avoid problems with 64-bit
configurations.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:31 +01:00
69c75fb458
Actual handlers for bus errors for Pmax and 3min.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
2005-10-29 19:31:30 +01:00
64dac503e8
System-specific handling of bus errors for DECstation variations
...
supporting parity errors only for memory (Pmax/3min/Maxine).
Fixes for resources decoded by the KN04/KN05 MB ASIC. Additional
clean-ups for the ECC handler.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:30 +01:00
3b2396d972
Use correct names for bits in the R3k cp0.status register.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:29 +01:00
e20368d5df
Get the thing to compile again ...
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:28 +01:00
c6ad7b7d3c
Use macros for the RM7k cp0.config bits instead of magic numbers.
...
Minor clean-ups.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org >
2005-10-29 19:31:28 +01:00
Thiemo Seufer
Ralf Baechle
Maciej W. Rozycki