OMAP-GPMC: driver updates for v4.8
* Make GPMC driver non modular as it is going to
be built-in only till arch/arm/mach-omap2 users
are removed.
* Fix build if CONFIG_OF is not defined.
* tag 'gpmc-omap-for-v4.8' of https://github.com/rogerq/linux:
memory: omap-gpmc: Move gpio functions out of #ifdef CONFIG_OF
memory: omap-gpmc: make it explicitly non-modular
Signed-off-by: Olof Johansson <olof@lixom.net>
SCPI updates and fixes for v4.8
1. Adds support for device power state management using generic power
domains and runtime PM
2. Other minor/miscellaneous fixes to the driver
* tag 'scpi-updates-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: scpi: add device power domain support using genpd
Documentation: add DT bindings for ARM SCPI power domains
firmware: arm_scpi: add support for device power state management
firmware: arm_scpi: make it depend on MAILBOX instead of ARM_MHU
firmware: arm_scpi: mark scpi_get_sensor_value as static
firmware: arm_scpi: remove dvfs_get packed structure
Signed-off-by: Olof Johansson <olof@lixom.net>
Drivers for 4.8 #2:
- Make memory drivers explicitly non-modular
* tag 'at91-ab-4.8-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
memory: atmel-ebi: make it explicitly non-modular
memory: atmel-sdramc: make it explicitly non-modular
Signed-off-by: Olof Johansson <olof@lixom.net>
The Kconfig currently controlling compilation of this code is:
drivers/memory/Kconfig:config ATMEL_EBI
drivers/memory/Kconfig: bool "Atmel EBI driver"
...meaning that it currently is not being built as a module by anyone.
Lets remove the few remaining modular references, so that when reading
the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The Kconfig for this option is currently:
config ATMEL_SDRAMC
bool "Atmel (Multi-port DDR-)SDRAM Controller"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit. An
alternate init level might be worth considering at a later date.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
SCPI protocol supports device power state management. This deals with
power states of various peripheral devices in the system other than the
core compute subsystem.
This patch adds support for the power state management of those
peripheral devices.
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This pull request contains drivers related changes for Broadcom SoCs:
- Florian moves drivers/soc/brcmstb to drivers/soc/bcm/brcmstb to be consistent with
how other SoCs are doing it
- Chris provides a reset driver which is common to the BCM21664 and BCM23550 SoCs
- Ben fixes a warning by providing the appropriate include file
* tag 'arm-soc/for-4.8/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: fix warning from missing include
power: Introduce Broadcom kona reset driver
soc: Move brcmstb to bcm/brcmstb
Signed-off-by: Olof Johansson <olof@lixom.net>
Topic branch for Exynos MFC changes for v4.8:
Pull s5p-mfc changes from media tree so the arm/mach-exynos code
could be removed. The bindings are converted to generic reserved memory
bindings.
* tag 'samsung-drivers-exynos-mfc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Enable MFC device on Exynos4412 Odroid boards
ARM: dts: exynos: Convert MFC device to generic reserved memory bindings
ARM: EXYNOS: Remove code for MFC custom reserved memory handling
media: s5p-mfc: add iommu support
media: s5p-mfc: replace custom reserved memory handling code with generic one
media: s5p-mfc: use generic reserved memory bindings
of: reserved_mem: add support for using more than one region for given device
media: set proper max seg size for devices on Exynos SoCs
media: vb2-dma-contig: add helper for setting dma max seg size
s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open()
s5p-mfc: Add release callback for memory region devs
s5p-mfc: Set device name for reserved memory region devs
Signed-off-by: Olof Johansson <olof@lixom.net>
The gpio related functions were mistakenly built only if CONFIG_OF
is defined. They are needed even otherwise and will cause build
failures if CONFIG_OF is not defined. Move the gpio functions
outside #ifdef CONFIG_OF.
Fixes: d2d00862df ("memory: omap-gpmc: Support general purpose input for WAITPINs")
Signed-off-by: Roger Quadros <rogerq@ti.com>
The Kconfig currently controlling compilation of this code is:
drivers/memory/Kconfig:config OMAP_GPMC
drivers/memory/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We don't replace module.h with init.h since the file already has that.
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reset controller changes for v4.8, part 2
- add Amlogic Meson SoC Reset Controller driver
* tag 'reset-for-4.8-2' of git://git.pengutronix.de/git/pza/linux:
dt-bindings: reset: Add bindings for the Meson SoC Reset Controller
reset: Add support for the Amlogic Meson SoC Reset Controller
Signed-off-by: Olof Johansson <olof@lixom.net>
Drivers for 4.8:
- Add a driver for the EBI
* tag 'at91-ab-4.8-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
memory: atmel-ebi: add DT bindings documentation
memory: add Atmel EBI (External Bus Interface) driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM Based SoC R-Car SYSC Updates for v4.8
e0c98b9171 soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
74699228b9 soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions
2ff1bf77e4 soc: renesas: rcar-sysc: Document r8a7796 support
* tag 'renesas-rcar-sysc-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions
soc: renesas: rcar-sysc: Document r8a7796 support
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung drivers/soc update for v4.8:
1. Move the power domain driver from arm/mach-exynos and prepare
for supporting ARMv8.
2. Add COMPILE_TEST.
* tag 'samsung-drivers-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pm_domains: Enable COMPILE_TEST for build coverage
soc: samsung: pm_domains: Prepare for supporting ARMv8 Exynos
ARM: EXYNOS: Move pm_domains driver to drivers/soc/samsung
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM_SCPI_PROTOCOL can be used with any mailbox and not just ARM MHU
mailbox controller. This patch drops it's dependency on ARM_MHU and
make it depend on just mailbox framework.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
scpi_get_sensor_value like other scpi operations needs to be static.
This patch marks it as static to be consistent with others.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
dvfs_get packed structure is used to read the DVFS/OPP index from the
firmware. It just contains a single byte that needs no packing making
the whole structure defination unnecessary.
This patch replaces the unnecessary dvfs_get packed structure with an
unsigned byte.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The brcmstb_biuctrl_init() is defined in the soc specific header
file, but wasn't included in the driver file. Fix the following
warning by including <linux/soc/brcmstb/brcmstb.h> in the driver:
drivers/soc/brcmstb/biuctrl.c:101:13: warning: symbol 'brcmstb_biuctrl_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This driver supports reset on both BCM21664 and BCM23550.
Code is being moved from arch/arm/mach-bcm/board_bcm21664.c
Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch replaces custom properties for defining reserved memory
regions with generic reserved memory bindings for MFC video codec
device.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
[k.kozlowski: Add Samsung copyrights]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Once MFC driver has been converted to generic reserved memory bindings,
there is no need for custom memory reservation code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Exynos MFC driver was converted to use a generic reserved memory
regions and IOMMU. Pull these changes before removal of mach-specific
code from mach-exynos and before changing DT bindings.
Olof Johansson
Paul Gortmaker
Sudeep Holla
Roger Quadros
Ben Dooks
Chris Brand
Marek Szyprowski
Krzysztof Kozlowski