VF clients are configured as enforced, meaning firmware is validating
the correctness of their ethertype/vid during transmission.
Once txvlan is disabled, VF would start getting SKBs for transmission
here vlan is on the payload - but it'll pass the packet's ethertype
instead of the vid, leading to firmware declaring it as malicious.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
pull-request: can 2017-06-09
this is a pull request of 6 patches for net/master.
There's a patch by Stephane Grosjean that fixes an uninitialized symbol warning
in the peak_canfd driver. A patch by Johan Hovold to fix the product-id
endianness in an error message in the the peak_usb driver. A patch by Oliver
Hartkopp to enable CAN FD for virtual CAN devices by default. Three patches by
me, one makes the helper function can_change_state() robust to be called with
cf == NULL. The next patch fixes a memory leak in the gs_usb driver. And the
last one fixes a lockdep splat by properly initialize the per-net
can_rcvlists_lock spin_lock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The change to remove free_netdev() from ieee80211_if_free()
erroneously didn't add the necessary free_netdev() for when
ieee80211_if_free() is called directly in one place, rather
than as the priv_destructor. Add the missing call.
Fixes: cf124db566 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPI's from the victim cpu are not handled in dev_cpu_callback.
So these pending IPI's would be sent to the remote cpu only when
NET_RX is scheduled on the victim cpu and since this trigger is
unpredictable it would result in packet latencies on the remote cpu.
This patch add support to send the pending ipi's of victim cpu.
Signed-off-by: Ashwanth Goli <ashwanth@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1.) Bugfix of function stmmac_get_tx_hwtstamp.
Corrected the tx timestamp available check (same as 4.8 and older)
Change printout from info syslevel to debug.
2.) Bugfix of function stmmac_get_rx_hwtstamp.
Corrected the rx timestamp available check (same as 4.8 and older)
Change printout from info syslevel to debug.
Fixes: ba1ffd74df ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Mario Molitor <mario_molitor@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
According the CYCLON V documention only the bit 16 of snaptypesel should
set.
(more information see Table 17-20 (cv_5v4.pdf) :
Timestamp Snapshot Dependency on Register Bits)
Fixes: d2042052a0 ("stmmac: update the PTP header file")
Signed-off-by: Mario Molitor <mario_molitor@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like this:
Message from syslogd@flamingo at Apr 26 00:45:00 ...
kernel:unregister_netdevice: waiting for lo to become free. Usage count = 4
They seem to coincide with net namespace teardown.
The message is emitted by netdev_wait_allrefs().
Forced a kdump in netdev_run_todo, but found that the refcount on the lo
device was already 0 at the time we got to the panic.
Used bcc to check the blocking in netdev_run_todo. The only places
where we're off cpu there are in the rcu_barrier() and msleep() calls.
That behavior is expected. The msleep time coincides with the amount of
time we spend waiting for the refcount to reach zero; the rcu_barrier()
wait times are not excessive.
After looking through the list of callbacks that the netdevice notifiers
invoke in this path, it appears that the dst_dev_event is the most
interesting. The dst_ifdown path places a hold on the loopback_dev as
part of releasing the dev associated with the original dst cache entry.
Most of our notifier callbacks are straight-forward, but this one a)
looks complex, and b) places a hold on the network interface in
question.
I constructed a new bcc script that watches various events in the
liftime of a dst cache entry. Note that dst_ifdown will take a hold on
the loopback device until the invalidated dst entry gets freed.
[ __dst_free] on DST: ffff883ccabb7900 IF tap1008300eth0 invoked at 1282115677036183
__dst_free
rcu_nocb_kthread
kthread
ret_from_fork
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in bind() and connect()
handlers of the AF_UNIX socket. Since neither syscall enforces a minimum
size of the corresponding memory region, very short sockaddrs (zero or
one byte long) result in operating on uninitialized memory while
referencing .sa_family.
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CAN FD capable CAN interfaces can handle (classic) CAN 2.0 frames too.
New users usually fail at their first attempt to explore CAN FD on
virtual CAN interfaces due to the current CAN_MTU default.
Set the MTU to CANFD_MTU by default to reduce this confusion.
If someone *really* needs a 'classic CAN'-only device this can be set
with the 'ip' tool with e.g. 'ip link set vcan0 mtu 16' as before.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds the missing kfree() in gs_cmd_reset() to free the
memory that is not used anymore after usb_control_msg().
Cc: linux-stable <stable@vger.kernel.org>
Cc: Maximilian Schneider <max@schneidersoft.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Make sure to use the USB device product-id stored in host-byte order in
a probe error message.
Also remove a redundant reassignment of the local usb_dev variable which
had already been used to retrieve the product id.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes two uninitialized symbol warnings in the new code adding
support of the PEAK-System PCAN-PCI Express FD boards, in the socket-CAN
network protocol family.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In OOM situations where no skb can be allocated, can_change_state() may
be called with cf == NULL. As this function updates the state and error
statistics it's not an option to skip the call to can_change_state() in
OOM situations.
This patch makes can_change_state() robust, so that it can be called
with cf == NULL.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 1aa6c4f6b8 ("net: vrf: Add l3mdev rules on first device create")
adds the l3mdev FIB rule the first time a VRF device is created. However,
it only creates the rule once and only in the namespace the first device
is created - which may not be init_net. Fix by using the net_generic
capability to make the add_fib_rules flag per network namespace.
Fixes: 1aa6c4f6b8 ("net: vrf: Add l3mdev rules on first device create")
Reported-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that test_l4lb was failing in selftests:
# ./test_progs
test_pkt_access:PASS:ipv4 77 nsec
test_pkt_access:PASS:ipv6 44 nsec
test_xdp:PASS:ipv4 2933 nsec
test_xdp:PASS:ipv6 1500 nsec
test_l4lb:PASS:ipv4 377 nsec
test_l4lb:PASS:ipv6 544 nsec
test_l4lb:FAIL:stats 6297600000 200000
test_tcp_estats:PASS: 0 nsec
Summary: 7 PASSED, 1 FAILED
Tracking down the issue actually revealed that endianness selection
in bpf_endian.h is broken when compiled with clang with bpf target.
test_pkt_access.c, test_l4lb.c is compiled with __BYTE_ORDER as
__BIG_ENDIAN, test_xdp.c as __LITTLE_ENDIAN! test_l4lb noticeably
fails, because the test accounts bytes via bpf_ntohs(ip6h->payload_len)
and bpf_ntohs(iph->tot_len), and compares them against a defined
value and given a wrong endianness, the test outcome is different,
of course.
Turns out that there are actually two bugs: i) when we do __BYTE_ORDER
comparison with __LITTLE_ENDIAN/__BIG_ENDIAN, then depending on the
include order we see different outcomes. Reason is that __BYTE_ORDER
is undefined due to missing endian.h include. Before we include the
asm/byteorder.h (e.g. through linux/in.h), then __BYTE_ORDER equals
__LITTLE_ENDIAN since both are undefined, after the include which
correctly pulls in linux/byteorder/little_endian.h, __LITTLE_ENDIAN
is defined, but given __BYTE_ORDER is still undefined, we match on
__BYTE_ORDER equals to __BIG_ENDIAN since __BIG_ENDIAN is also
undefined at that point, sigh. ii) But even that would be wrong,
since when compiling the test cases with clang, one can select between
bpfeb and bpfel targets for cross compilation. Hence, we can also not
rely on what the system's endian.h provides, but we need to look at
the compiler's defined endianness. The compiler defines __BYTE_ORDER__,
and we can match __ORDER_LITTLE_ENDIAN__ and __ORDER_BIG_ENDIAN__,
which also reflects targets bpf (native), bpfel, bpfeb correctly,
thus really only rely on that. After patch:
# ./test_progs
test_pkt_access:PASS:ipv4 74 nsec
test_pkt_access:PASS:ipv6 42 nsec
test_xdp:PASS:ipv4 2340 nsec
test_xdp:PASS:ipv6 1461 nsec
test_l4lb:PASS:ipv4 400 nsec
test_l4lb:PASS:ipv6 530 nsec
test_tcp_estats:PASS: 0 nsec
Summary: 7 PASSED, 0 FAILED
Fixes: 43bcf707cc ("bpf: fix _htons occurences in test_progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each time a new speed is added, the bonding 802.3ad isn't updated. Add a
comment to remind the developer to update this driver.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds 14 Gbps enum definition, and fixes
aggregated bandwidth calculation based on above slave links.
Fixes: 0d7e2d2166 ("IB/ipoib: add get_link_ksettings in ethtool")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds [5|50] Gbps enum definition, and fixes
aggregated bandwidth calculation based on above slave links.
Fixes: c9a70d4346 ("net-next: ethtool: Added port speed macros.")
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first netlink attribute (value 0) must always be defined
as none/unspec.
Because we cannot change an existing UAPI, I add a comment to point the
mistake and avoid to propagate it in a new ovs API in the future.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While discussing the possible merits of clang warning about unused initialized
functions, I found one function that was clearly meant to be called but
never actually is.
__ila_hash_secret_init() initializes the hash value for the ila locator,
apparently this is intended to prevent hash collision attacks, but this ends
up being a read-only zero constant since there is no caller. I could find
no indication of why it was never called, the earliest patch submission
for the module already was like this. If my interpretation is right, we
certainly want to backport the patch to stable kernels as well.
I considered adding it to the ila_xlat_init callback, but for best effect
the random data is read as late as possible, just before it is first used.
The underlying net_get_random_once() is already highly optimized to avoid
overhead when called frequently.
Fixes: 7f00feaf10 ("ila: Add generic ILA translation facility")
Cc: stable@vger.kernel.org
Link: https://www.spinics.net/lists/kernel/msg2527243.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function ‘rtw_cfg80211_add_monitor_if’:
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2670:10: error: ‘struct net_device’ has no member named ‘destructor’
mon_ndev->destructor = rtw_ndev_destructor;
^
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger says:
====================
netvsc: bug fixes
These are bugfixes for netvsc driver in 4.12.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The work queue and handling of network filter parameters should
be in rndis_device. This gets rid of warning from RCU checks,
eliminates a race and cleans up code.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval
David S. Miller
Johannes Berg
ashwanth@codeaurora.org
Mario Molitor
Krister Johansen
Mateusz Jurczyk
Joe Perches
Oliver Hartkopp
Marc Kleine-Budde
Johan Hovold
Stephane Grosjean
David Ahern
Daniel Borkmann
Nicolas Dichtel
Thibaut Collet
Arnd Bergmann
stephen hemminger