Added the support of Acer Aspire One with ALC269 codec chip.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added the support of Toshiba S06 with ALC262 codec chip.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fixed the support of HP DC7600 with ALC260, which was formerly handled
as model=hp-3013.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The WM8903 is a high performance ultra-low power stereo CODEC optimised
for portable audio applications. Features include:
* 5mW power consumption for DAC to headphone playback
* Stereo DAC SNR 96dB typical, THD -86dB typical
* Stereo ADC SNR 93dB typical, THD -80dB typical
* Up to 3 single ended inputs per stereo channel
* Up to 2 pseudo differential inputs per stereo channel
* Up to 1 fully differential mic input per stereo channel
* Digital Dynamic Range Controller (compressor/limiter)
* Digital sidetone mixing
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the wss_dout function which does not mess
shadowed register values during chip probing.
Otherwise, user ends up with stupid mixer settings
after driver loading.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- more register naming work
- finally figured out that weird CR register stuff
(and did I mention that I hate _really_ undecipherable open-coded values?)
- fix handling of IRQ sharing in interrupt handler
(hopefully properly, otherwise I'd be grateful to hear your
pedantic comments ;)
- add handy SPECS_PAGE references wherever useful
- comments, cleanup
- add me as module author
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALC269 capture source wasn't properly set up.
It's an independent MUX (0x23), not a source of ADC.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Check continuous pages in the buffer set up so that the number of
BDL is reduced. Also increased the max buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The errors at buffer preallocations aren't fatal and safe to ignore.
The buffer will be allocated dynamically when opened.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Check the continuity of allocated pages to reduce the BDL size as much
as possible so that it can use more than 1MB buffers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Most hardwares have limited buffer-descriptor table length. This
also restricts the max buffer size of the sound driver.
For example, snd-hda-intel has 1MB buffer size limit, and this is
because it can have at most 256 BDL entries. For supporting larger
buffers, we need to allocate larger pages even for sg-buffers.
This patch changes the sgbuf allocation code to try to allocate
larger pages first. At each head of the allocated pages, the
number of allocated pages is stored in the lowest bits of the
corresponding entry of the table addr field. This change isn't
visible as long as the driver uses snd_sgbuf_get_addr() helper.
Also, the patch adds a new function, snd_pcm_sgbuf_get_chunk_size().
This returns the size of the chunk on continuous pages starting at
the given position offset. If the chunk reaches to a non-continuous
page, it returns the size to the boundary.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
snd_dma_alloc_pages_fallback() always tries to reduce the size in a half,
but it's not good when the given size isn't a power-of-two.
Check it first then try to align.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Clean up SG-buffer helper functions and macros. Helpers take substream
as arguments now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALC269 codec has a beep, but it was not used, so far.
Create a beep control appropriately.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Replace snd_opl3sa2_info_xxx() with snd_wss_info_xxx().
Drop check of card->private_data which cannot be NULL
if card is not NULL (spotted by Rene Herman).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- use specs-derived register name enums instead of open-coded numeric
values, for better understanding of things
- fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but
instead the io _base_ which has multiplexed _access_ to GCR config
space, at _sub_ registers 0x08 and 0x0c)
- add FIXME comments about a race condition and MPU401 features
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
With the restructering of the indy button handling the old OSS HAL2 driver
got broken. Since there is a new ALSA driver for HAL2, the experimental
OSS driver is obsolete and will be removed by this patch.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When bdl_pos_adj=0 is given, disable the position-check and the delayed
period update mechanism. Usually bdl_pos_adj=0 is set only for the
debugging purpose on really broken hardwares. It's better to disable
the extra complexity in such a case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Mute sound by setting mute bit without
setting volume to 0. It makes both source code
and binary shorter.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Kailang Yang
Mark Brown
Jaroslav Kysela
Krzysztof Helt
Rene Herman
Andreas Mohr
Takashi Iwai
Alexander Beregalov
Roel Kluin
Thomas Bogendoerfer