The patch adds support for THP (transparent huge pages) to LPAE
systems. When this feature is enabled, the kernel tries to map
anonymous pages as 2MB sections where possible.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[steve.capper@linaro.org: symbolic constants used, value of
PMD_SECT_SPLITTING adjusted, tlbflush.h included in pgtable.h,
added PROT_NONE support.]
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
This patch adds support for hugetlbfs based on the x86 implementation.
It allows mapping of 2MB sections (see Documentation/vm/hugetlbpage.txt
for usage). The 64K pages configuration is not supported (section size
is 512MB in this case).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[steve.capper@linaro.org: symbolic constants replace numbers in places.
Split up into multiple files, to simplify future non-LPAE support,
removed huge_pmd_share code, as this is very rarely executed,
Added PROT_NONE support].
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
On ARM we use the __flush_dcache_page function to flush the dcache
of pages when needed; usually when the PG_dcache_clean bit is unset
and we are setting a PTE.
A HugeTLB page is represented as a compound page consisting of an
array of pages. Thus to flush the dcache of a HugeTLB page, one must
flush more than a single page.
This patch modifies __flush_dcache_page such that all constituent
pages of a HugeTLB page are flushed.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
For 3 levels of paging the PTE_EXT_NG bit will be set for user
address ptes that are written to a page table but not for ptes
created with mk_pte.
This can cause some comparison tests made by pte_same to fail
spuriously and lead to other problems.
To correct this behaviour, we mask off PTE_EXT_NG for any pte that
is present before running the comparison.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Pull ARM fixes from Russell King:
"Just three this time, all really quite small"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported
ARM: 7727/1: remove the .vm_mm value from gate_vma
ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling
Pull ARM SoC fixes from Olof Johansson:
"We didn't have any fixes sent up for -rc2, so this is a slightly
larger batch. A bit all over the place platform-wise; OMAP, at91,
marvell, renesas, sunxi, ux500, etc.
I tried to summarize highlights but there isn't a whole lot to point
out. Lots of little things fixed all over. A couple of defconfig
updates due to new/changing options."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: at91/sama5: fix incorrect PMC pcr div definition
ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
ARM: at91: at91sam9n12: move external irq declatation to DT
ARM: shmobile: marzen: Use error values in usb_power_*
ARM: tegra: defconfig fixes
ARM: nomadik: fix IRQ assignment for SMC ethernet
ARM: vt8500: Add missing NULL terminator in dt_compat
clk: tegra: add ac97 controller clock
clk: tegra: remove USB from clk init table
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
SERIAL: OMAP: Remove the slave idle handling from the driver
ARM: OMAP2+: serial: Remove the un-used slave idle hooks
ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
arm: mvebu: fix the 'ranges' property to handle PCIe
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
...
From Maxime Ripard:
Small set of fixes for 3.10:
- Fix build breakage in pinctrl driver when no other architecture is selected
- Fix Mini X-plus device tree build
* tag 'sunxi-fixes-for-3.10' of git://github.com/mripard/linux:
ARM: sunxi: select ARCH_REQUIRE_GPIOLIB
ARM: sunxi: Fix Mini X-plus device tree build
Signed-off-by: Olof Johansson <olof@lixom.net>
From Nicolas Ferre:
- One definition fix that can lead to mis-clock some AT91 peripherals on SAMA5.
- Two DT related fixes.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/sama5: fix incorrect PMC pcr div definition
ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
ARM: at91: at91sam9n12: move external irq declatation to DT
Signed-off-by: Olof Johansson <olof@lixom.net>
The PA24 pin is wrongly assigned to peripheral B.
In the current config there is 2 ETX3 pins (PA11 and PA24) and
no ETXER pin (PA22).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.8+
Pull USB fixes from Greg Kroah-Hartman:
"Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
to be almost impossible to get right for all of the different
platforms these days."
* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: cxacru: potential underflow in cxacru_cm_get_array()
USB: ftdi_sio: Add support for Newport CONEX motor drivers
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
usb: ohci: fix goto wrong tag in err case
usb: isp1760-if: fix memleak when platform_get_resource fail
usb: ehci-s5p: fix memleak when fallback to pdata
USB: serial: clean up chars_in_buffer
USB: ti_usb_3410_5052: fix chars_in_buffer overhead
USB: io_ti: fix chars_in_buffer overhead
USB: ftdi_sio: fix chars_in_buffer overhead
USB: ftdi_sio: clean up get_modem_status
USB: serial: add generic wait_until_sent implementation
USB: serial: add wait_until_sent operation
USB: set device dma_mask without reference to global data
USB: Blacklisted Cinterion's PLxx WWAN Interface
usb: option: Add Telewell TW-LTE 4G
USB: EHCI: remove bogus #error
USB: reset resume quirk needed by a hub
USB: usb-stor: realtek_cr: Fix compile error
usb, chipidea: fix link error when USB_EHCI_HCD is a module
...
Commit d3f79584a8 ("ARM: cleanup undefined instruction entry code")
improved the register scheduling when handling undefined instructions.
A side effect of this is that r5 is now used as a temporary, whilst the
VFP probing code relies on r5 containing a non-zero value when VFP is
not supported.
This patch fixes the VFP detection code so that we don't rely on the
contents of r5. Without this patch, Linux dies loudly on CPUs without
VFP support.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If one reads /proc/$PID/smaps, the mmap_sem belonging to the
address space of the task being examined is locked for reading.
All the pages of the vmas belonging to the task's address space
are then walked with this lock held.
If a gate_vma is present in the architecture, it too is examined
by the fs/proc/task_mmu.c code. As gate_vma doesn't belong to the
address space of the task though, its pages are not walked.
A recent cleanup (commit f6604efe) of the gate_vma initialisation
code set the vm_mm value to &init_mm. Unfortunately a non-NULL
vm_mm value in the gate_vma will cause the task_mmu code to attempt
to walk the pages of the gate_vma (with no mmap-sem lock held). If
one enables Transparent Huge Page support and vm debugging, this
will then cause OOPses as pmd_trans_huge_lock is called without
mmap_sem being locked.
This patch removes the .vm_mm value from gate_vma, restoring the
original behaviour of the task_mmu code.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From Simon Horman:
Correct USB PHY initialisation on the marzen board.
* tag 'renesas-boards-marzen-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: marzen: Use error values in usb_power_*
Signed-off-by: Olof Johansson <olof@lixom.net>
From Paul Walmsley:
Fix the OMAP serial driver to work correctly on OMAP4 when booting
with DT.
* tag 'omap-fixes-a-for-3.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
SERIAL: OMAP: Remove the slave idle handling from the driver
ARM: OMAP2+: serial: Remove the un-used slave idle hooks
ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch updates the marzen board code as if USB PHY isn't enabled
they phy will have a value set by ERR_PTR() rather than be NULL.
Without this patch a NULL pointer dereference and kernel panic
occurs on initialisation of USB on marzen.
This resolves a regression introduced in 3.10-rc1 by
b7fa5c2aec
("usb: phy: return -ENXIO when PHY layer isn't enabled").
Tested-by: Nguyen Hong Ky <nh-ky@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Before f7b861b7a6 ("arm: Use generic idle loop") ARM would kill the
CPU within the rcu idle section. Now that the rcu_idle_enter()/exit()
pair have been pushed lower down in the idle loop this is no longer true
and so using RCU_NONIDLE here is no longer necessary and also harmful
because RCU is not actually idle at this point.
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.
Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The assignment of IRQ for the SMC91x ethernet adapter had two
problems making it non-working:
- It was not put into the ethernet device node. Let's do this
by using the board-specific overlay, so we can make other
overlays on other Nomadik boards.
- The IRQ number was actually completely wrong, this was the
number for NHK8815, not S8815.
After this ethernet starts working on the USB S8815.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
From Linus Walleij, some ux500 fixes for the v3.10-rc series:
- Fixes up the debug UART
- Fix dangerous platform data double-assignment
- Fix auxdata for the ethernet device
- Select REGULATOR to satisfy Kconfig
* tag 'ux500-arm-soc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: select REGULATOR
ARM: ux500: Provide device enumeration number suffix for SMSC911x
ARM: ux500: Fix incorrect DEBUG UART virtual addresses
ARM: ux500: Remove duplicated assignment of ab8500_platdata
Signed-off-by: Olof Johansson <olof@lixom.net>
From Shawn Guo, imx fixes for 3.10:
- A few imx6 clock fixes. Nothing is extremely important, but since
we're still in early -rc, I send them for 3.10 inclusion.
- Having bootloader handle ARM errata, we will need to replicate the
diagnostic register of boot cpu into secondary cores, since
bootloader only sets up boot cpu. Otherwise, errata workaround simply
does not work.
* tag 'imx-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: fix typo in gpu3d_shader_sels
ARM: imx: replicate the diagnostic register of boot cpu into secondary cores
ARM i.MX6: correct MLB clock configuration
ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
From Jason Cooper, mvebu fixes for v3.10 (round 2):
- mvebu (and orion SoCs)
- remove init_dma_coherent_pool_size()
- mvebu
- fix ranges DT property
- fix DT reg value for L2 cache
- select ARCH_REQUIRE_GPIOLIB
- orion legacy
- fix num_resources and id for ge10 and ge11
* tag 'fixes-3.10-2' of git://git.infradead.org/users/jcooper/linux:
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
arm: mvebu: fix the 'ranges' property to handle PCIe
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
ARM: mvebu: Fix ranges entry on XP GP board
ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Signed-off-by: Olof Johansson <olof@lixom.net>
From Tony Lindgren, fixes for omaps:
- a section mismatch fix for hwmod
- boot fix for omap2plus_defconfig for omap2
- musb interrupt fix when using device tree
- am33xx clock fix that I missed earlier somehow
- omap1 dma return code error fix
* tag 'omap-for-v3.10-rc1/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig
ARM: OMAP: fix error return code in omap1_system_dma_init()
ARM: OMAP: fix __init section mismatch for _enable_preprogram
ARM: dts: Fix musb interrupt for device tree booting
Signed-off-by: Olof Johansson <olof@lixom.net>
Catalin Marinas
Steve Capper
Linus Torvalds
Olof Johansson
Josh Wu
Boris BREZILLON
Jean-Christophe PLAGNIOL-VILLARD
Will Deacon
Ard Biesheuvel
Simon Horman
Stephen Boyd
Alexandre Courbot
Linus Walleij