bh_submit_read() is responsible for unlock bh on endio. In addition,
we need to use bh_uptodate_or_lock() to avoid races.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recently, I ecountered some corrupted filesystems in which some
groups' free inode counts were 65535, it seemed that free inode
count was overflow. This patch teaches ext4 to check free inode
count before allocaing an inode.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Free block counters should be checked before doing allocation.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The crash was caused by a variable being erronously declared static in
token2str().
In addition to /proc/mounts, the problem can also be easily replicated
by accessing /proc/fs/ext4/<partition>/options in parallel:
$ cat /proc/fs/ext4/<partition>/options > options.txt
... and then running the following command in two different terminals:
$ while diff /proc/fs/ext4/<partition>/options options.txt; do true; done
This is also the cause of the following a crash while running xfstests
#234, as reported in the following bug reports:
https://bugs.launchpad.net/bugs/1053019https://bugzilla.kernel.org/show_bug.cgi?id=47731
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Figg <brad.figg@canonical.com>
Cc: stable@vger.kernel.org
The update_backups() function is used to backup all the metadata
blocks, so we should not take it for granted that 'data' is pointed to
a super block and use ext4_superblock_csum_set to calculate the
checksum there. In case where the data is a group descriptor block,
it will corrupt the last group descriptor, and then e2fsck will
complain about it it.
As all the metadata checksums should already be OK when we do the
backup, remove the wrong ext4_superblock_csum_set and it should be
just fine.
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
In ext4_nonda_switch(), if the file system is getting full we used to
call writeback_inodes_sb_if_idle(). The problem is that we can be
holding i_mutex already, and this causes a potential deadlock when
writeback_inodes_sb_if_idle() when it tries to take s_umount. (See
lockdep output below).
As it turns out we don't need need to hold s_umount; the fact that we
are in the middle of the write(2) system call will keep the superblock
pinned. Unfortunately writeback_inodes_sb() checks to make sure
s_umount is taken, and the VFS uses a different mechanism for making
sure the file system doesn't get unmounted out from under us. The
simplest way of dealing with this is to just simply grab s_umount
using a trylock, and skip kicking the writeback flusher thread in the
very unlikely case that we can't take a read lock on s_umount without
blocking.
Also, we now check the cirteria for kicking the writeback thread
before we decide to whether to fall back to non-delayed writeback, so
if there are any outstanding delayed allocation writes, we try to get
them resolved as soon as possible.
[ INFO: possible circular locking dependency detected ]
3.6.0-rc1-00042-gce894ca #367 Not tainted
-------------------------------------------------------
dd/8298 is trying to acquire lock:
(&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
but task is already holding lock:
(&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
which lock already depends on the new lock.
2 locks held by dd/8298:
#0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3
#1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
stack backtrace:
Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367
Call Trace:
[<c015b79c>] ? console_unlock+0x345/0x372
[<c06d62a1>] print_circular_bug+0x190/0x19d
[<c019906c>] __lock_acquire+0x86d/0xb6c
[<c01999db>] ? mark_held_locks+0x5c/0x7b
[<c0199724>] lock_acquire+0x66/0xb9
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c06db935>] down_read+0x28/0x58
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
[<c026f3b2>] ext4_nonda_switch+0xe1/0xf4
[<c0271ece>] ext4_da_write_begin+0x27/0x193
[<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb
[<c01ddc47>] __generic_file_aio_write+0x1dd/0x205
[<c01ddce7>] generic_file_aio_write+0x78/0xd3
[<c026d336>] ext4_file_write+0x480/0x4a6
[<c0198c1d>] ? __lock_acquire+0x41e/0xb6c
[<c0180944>] ? sched_clock_cpu+0x11a/0x13e
[<c01967e9>] ? trace_hardirqs_off+0xb/0xd
[<c018099f>] ? local_clock+0x37/0x4e
[<c0209f2c>] do_sync_write+0x67/0x9d
[<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44
[<c020a7b9>] vfs_write+0x7b/0xe6
[<c020a9a6>] sys_write+0x3b/0x64
[<c06dd4bd>] syscall_call+0x7/0xb
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Do not iterate over data blocks scanning for bh's to forget as they're
never exist. This improves time taken by unlink / truncate syscall.
Tested by continuously truncating file that is being written by dd.
Another test is rm -rf of linux tree while tar unpacks it. With
ordered data mode condition unlikely(!tbh) was always met in
ext4_free_blocks. With journal data mode tbh was found only few times,
so optimisation is also possible.
Unlinking fallocated 60G file after doing sync && echo 3 >
/proc/sys/vm/drop_caches && time rm --help
X86 before (linux 3.6-rc4):
# time rm -f test1
real 0m2.710s
user 0m0.000s
sys 0m1.530s
X86 after:
# time rm -f test1
real 0m0.644s
user 0m0.003s
sys 0m0.060s
MIPS before (linux 2.6.37):
# time rm -f test1
real 0m 4.93s
user 0m 0.00s
sys 0m 4.61s
MIPS after:
# time rm -f test1
real 0m 0.16s
user 0m 0.00s
sys 0m 0.06s
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
Commit 1c6bd7173d introduced a regression where an online resize
operation which did not change the number of block groups would fail,
i.e:
mke2fs -t /dev/vdc 60000
mount /dev/vdc
resize2fs /dev/vdc 60001
This was due to a bug in the logic regarding when to try converting
the filesystem to use meta_bg.
Also fix up a number of other minor issues with the online resizing
code: (a) Fix a sparse warning; (b) only check to make sure the device
is large enough once, instead of multiple times through the resize
loop.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of checking whether the handle is valid, we check if journal
is enabled. This avoids taking the s_orphan_lock mutex in all cases
when there is no journal in use, including the error paths where
ext4_orphan_del() is called with a handle set to NULL.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is a revert of commit b56ff9d397, which removed the call to
ext4_issue_discard() to fix a BUG reported because
ext4_issue_discard() was being called from inside a block group
spinlock. As it turns out this bug had already been fixed by Lukas
Czerner in commit 53fdcf992d by the simple expedient of moving when
we call ext4_issue_discard() outside the spinlock.
So it should be safe to re-enable this functionality, which I tested
by putting an BUG_ON(in_atomic) just after the restored callsite to
ext4_issue_discard().
Addresses-Google-Bug: #6750518
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Anatol Pomozov <anatol.pomozov@gmail.com>
htree_dirblock_to_tree() declares a non-initialized 'err' variable,
which is passed as a reference to another functions expecting them to
set this variable with their error codes.
It's passed to ext4_bread(), which then passes it to ext4_getblk(). If
ext4_map_blocks() returns 0 due to a lookup failure, leaving the
ext4_getblk() buffer_head uninitialized, it will make ext4_getblk()
return to ext4_bread() without initialize the 'err' variable, and
ext4_bread() will return to htree_dirblock_to_tree() with this variable
still uninitialized. htree_dirblock_to_tree() will pass this variable
with garbage back to ext4_htree_fill_tree(), which expects a number of
directory entries added to the rb-tree. which, in case, might return a
fake non-zero value due the garbage left in the 'err' variable, leading
the kernel to an Oops in ext4_dx_readdir(), once this is expecting a
filled rb-tree node, when in turn it will have a NULL-ed one, causing an
invalid page request when trying to get a fname struct from this NULL-ed
rb-tree node in this line:
fname = rb_entry(info->curr_node, struct fname, rb_hash);
The patch itself initializes the err variable in
htree_dirblock_to_tree() to avoid usage mistakes by the called
functions, and also fix ext4_getblk() to return a initialized 'err'
variable when ext4_map_blocks() fails a lookup.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For very long online resizes, a periodic update to the console log is
helpful for debugging and for progress reporting.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we have run out of reserved gdt blocks, then clear the resize_inode
feature and enable the meta_bg feature, so that we can continue
resizing the file system seamlessly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Set bg_itable_unused for file systems that have uninit_bg enabled.
This will speed up the first e2fsck run after the file system is
resized.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for resizing file systems with the meta_bg and
64bit features.
[ Added a fix by tytso to fix a divide by zero when resizing a
filesystem from 14 TB to 18TB. Also fixed overhead accounting for
meta_bg file systems.]
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously we allocated the s_group_info array with enough space for
any future possible growth of the file system via online resize. This
is unfortunate because it wastes memory, and it doesn't work for the
meta_bg scheme, since there is no limit based on the number of
reserved gdt blocks. So add the code to grow the s_group_info array
as needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, we allocated the s_flex_groups array to the maximum size
that the file system could be resized. There was two problems with
this approach. First, it wasted memory in the common case where the
file system was not resized. Secondly, once we start allowing online
resizing using the meta_bg scheme, there is no maximum size that the
file system can be resized. So instead, we need to grow the
s_flex_groups at inline resize time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The resize code was needlessly writing the backup block group
descriptor blocks multiple times (once per block group) during an
online resize.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The resize code was copying blocks at the beginning of each block
group in order to copy the superblock and block group descriptor table
(gdt) blocks. This was, unfortunately, being done even for block
groups that did not have super blocks or gdt blocks. This is a
complete waste of perfectly good I/O bandwidth, to skip writing those
blocks for sparse bg's.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Avoid changing o_blocks_count, since it is used later when reporting
old blocks count in debug mode.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In patch cb20d51883, ext4_set_bh_endio
and ext4_end_io_buffer_write are declared at the beginning of inode.c,
and again later on in the middle of the file. Remove the second set
of duplicated function declarations.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Dmitry Monakhov
Yongqiang Yang
Herton Ronaldo Krzesinski
Tao Ma
Theodore Ts'o
Andrey Sidorov
Anatol Pomozov
Carlos Maiolino
Zheng Liu
Wang Sheng-Hui