Commit Graph

189567 Commits

Author SHA1 Message Date
d binderman 6d1bdd2afb powerpc/pmac/windfarm: Don't test pointers before kfree()
Fix minor nits found by cppcheck

[./macintosh/windfarm_pm81.c:760]: (style) Redundant condition. It is safe to deallocate a NULL pointer
[./macintosh/windfarm_pm81.c:762]: (style) Redundant condition. It is safe to deallocate a NULL pointer

Signed-off-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:38 +10:00
d binderman 213972e9fa powerpc/pmac/low_i2c.c: three minor problems
Fix minor nits found by cppcheck

[./arch/powerpc/platforms/powermac/low_i2c.c:594]: (style) The scope of the variable chans can be reduced
[./arch/powerpc/platforms/powermac/low_i2c.c:594]: (style) The scope of the variable i can be reduced
[./arch/powerpc/platforms/powermac/low_i2c.c:1260]: (style) Redundant condition. It is safe to deallocate a NULL pointer

Signed-off-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:37 +10:00
d binderman 6237cdac5d powerpc/aoa: gpio-pmf.c: 3 * redundant code
Signed-off-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:36 +10:00
Joakim Tjernlund 469d62be92 powerpc/8xx: Use SPRG2 and DAR registers to stash r11 and cr.
This avoids storing these registers in memory.
CPU6 errata will still use the old way.
Remove some G2 leftover accesses from 2.4

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:34 +10:00
Joakim Tjernlund d069cb4373 powerpc/8xx: Don't touch ACCESSED when no SWAP.
Only the swap function cares about the ACCESSED bit in
the pte. Do not waste cycles updateting ACCESSED when swap
is not compiled into the kernel.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:33 +10:00
Joakim Tjernlund 4afb0be7cc powerpc/8xx: Avoid testing for kernel space in ITLB Miss.
Only modules will cause ITLB Misses as we always pin
the first 8MB of kernel memory.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:32 +10:00
Joakim Tjernlund fe1691e3f4 powerpc/8xx: Optimze TLB Miss handlers
This removes a couple of insn's from the TLB Miss
handlers whithout changing functionality.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:31 +10:00
Jason Gunthorpe 43b5fefc24 powerpc/ppc32: Fixup pmd_page to work when ARCH_PFN_OFFSET is non-zero
Instead of referencing mem_map directly, use pfn_to_page. Otherwise
the kernel crashes when trying to start userspace if ARCH_PFN_OFFSET is
non-zero and CONFIG_BOOKE is not defined

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:30 +10:00
Vaidyanathan Srinivasan 6fe9d1facb powerpc/pseries: Export data from new hcall H_EM_GET_PARMS
Add support for H_EM_GET_PARMS hcall that will return data
related to power modes from the platform.  Export the data
directly to user space for administrative tools to interpret
and use.

cat /proc/powerpc/lparcfg will export power mode data

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:29 +10:00
K.Prasad 9c7cc234dc powerpc: Disable interrupts for data breakpoint exceptions
Data address breakpoint exceptions are currently handled along with page-faults
which require interrupts to remain in enabled state. Since exception handling
for data breakpoints aren't pre-empt safe, we handle them separately.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 14:44:38 +10:00
Benjamin Herrenschmidt 578b7cd151 powerpc/vio: Add modalias support
BenH: Added to vio_cmo_dev_attrs as well

Provide a modalias entry for VIO devices in sysfs.  I believe
this was another initrd generation bugfix for anaconda.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 14:44:28 +10:00
Benjamin Herrenschmidt 55052eeca6 powerpc: Fix ioremap_flags() with book3e pte definition
We can't just clear the user read permission in book3e pte, because
that will also clear supervisor read permission.  This surely isn't
desired.  Fix the problem by adding the supervisor read back.

BenH: Slightly simplified the ifdef and applied to ppc64 too

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 14:39:47 +10:00
Corey Minyard f467bc148d powerpc/mpsc: Set the port device in the mpsc serial driver
The mpsc serial driver needx to set the port's device tree element
to register properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 14:12:36 +10:00
Corey Minyard 58706ef96f powerpc: Add a new zImage for maple using a different link address
The maple platform failed to load because it's firmware could not take a
link address of 0x4000000.  A new platform type with a link address of
0x400000 had to be created for the maple.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 14:12:36 +10:00
Benjamin Herrenschmidt a244b25217 Remove unused HDPU driver
This driver seems to be specific to a "Sky CPU" board for which we
don't appear to have upstream support (or not any more). No Kconfig
file in the kernel ever enables it. So remove it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 10:08:49 +10:00
Linus Torvalds 0fdf86754f Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix up alignf issues
2010-04-06 13:03:52 -07:00
Linus Torvalds 94c4fcec01 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Force MSI irq handlers to run with interrupts disabled
2010-04-06 13:03:22 -07:00
Linus Torvalds 14e71e4fb9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] hpwdt - fix lower timeout limit
  [WATCHDOG] iTCO_wdt: TCO Watchdog patch for additional Intel Cougar Point DeviceIDs
  [WATCHDOG] doc: Fix use of WDIOC_SETOPTIONS ioctl.
  [WATCHDOG] doc: watchdog simple example: don't fail on fsync()
  [WATCHDOG] set max63xx driver as ARM only
  [WATCHDOG] powerpc: pika_wdt ident cannot be const
2010-04-06 09:56:40 -07:00
Linus Torvalds ab195c58b8 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: unlock HPA if device shrunk
  libata: disable NCQ on Crucial C300 SSD
  libata: don't whine on spurious IRQ
2010-04-06 08:36:31 -07:00
Linus Torvalds cb4361c1dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  smc91c92_cs: fix the problem of "Unable to find hardware address"
  r8169: clean up my printk uglyness
  net: Hook up cxgb4 to Kconfig and Makefile
  cxgb4: Add main driver file and driver Makefile
  cxgb4: Add remaining driver headers and L2T management
  cxgb4: Add packet queues and packet DMA code
  cxgb4: Add HW and FW support code
  cxgb4: Add register, message, and FW definitions
  netlabel: Fix several rcu_dereference() calls used without RCU read locks
  bonding: fix potential deadlock in bond_uninit()
  net: check the length of the socket address passed to connect(2)
  stmmac: add documentation for the driver.
  stmmac: fix kconfig for crc32 build error
  be2net: fix bug in vlan rx path for big endian architecture
  be2net: fix flashing on big endian architectures
  be2net: fix a bug in flashing the redboot section
  bonding: bond_xmit_roundrobin() fix
  drivers/net: Add missing unlock
  net: gianfar - align BD ring size console messages
  net: gianfar - initialize per-queue statistics
  ...
2010-04-06 08:34:06 -07:00
Dan Carpenter 309361e09c proc: copy_to_user() returns unsigned
copy_to_user() returns the number of bytes left to be copied.

This was a typo from: d82ef020cf "proc: pagemap: Hold mmap_sem during
page walk".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-06 08:23:47 -07:00
Tejun Heo 445d211b0d libata: unlock HPA if device shrunk
Some BIOSes don't configure HPA during boot but do so while resuming.
This causes harddrives to shrink during resume making libata detach
and reattach them.  This can be worked around by unlocking HPA if old
size equals native size.

Add ATA_DFLAG_UNLOCK_HPA so that HPA unlocking can be controlled
per-device and update ata_dev_revalidate() such that it sets
ATA_DFLAG_UNLOCK_HPA and fails with -EIO when the above condition is
detected.

This patch fixes the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=15396

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Oleksandr Yermolenko <yaa.bta@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-06 10:55:33 -04:00
Tejun Heo 68b0ddb289 libata: disable NCQ on Crucial C300 SSD
Crucial said,

  Thank you for contacting us. We know that with our M225 line of SSDs
  you sometimes need to disable NCQ (native command queuing) to avoid
  just the type of errors you're seeing. Our recommendation for the
  M225 is to add libata.force=noncq to your Linux kernel boot options,
  under the kernel ATA library option.

  I have sent your feedback to the engineers working on the C300, and
  asked them to please pass it on to the firmware team. I have been
  notified that they are in the process of testing and finalizing a
  new firmware version, that you can expect to see released around the
  end of April. We’ll keep you posted as to when it will be available
  for download.

So, turn off NCQ on the drive w/ the current firmware revision.

Reported in the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=15573

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: lethalwp@scarlet.be
Reported-by: Luke Macken <lmacken@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-06 10:55:06 -04:00
Tejun Heo c710f78532 libata: don't whine on spurious IRQ
On configurations where IRQ line is shared with a different
controller, spurious IRQs may happen continuously.  The message was
put there primarily for debugging anyway.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-06 10:54:38 -04:00
Thomas Mingarelli 8ba42bd88c [WATCHDOG] hpwdt - fix lower timeout limit
[Novell Bug 581103] HP Watchdog driver has arbitrary (wrong) timeout limits.
Fix the lower timeout limit to a more appropriate value.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2010-04-06 14:37:43 +00:00