The actual Linux implementation for semctl(GETNCNT) and semctl(GETZCNT)
always (since 0.99.10) reported a thread as sleeping on all semaphores
that are listed in the semop() call.
The documented behavior (both in the Linux man page and in the Single
Unix Specification) is that a task should be reported on exactly one
semaphore: The semaphore that caused the thread to got to sleep.
This patch adds a pr_info_once() that is triggered if a thread hits the
relevant case.
The code triggers slightly too often, otherwise it would be necessary to
replicate the old code. As there are no known users of GETNCNT or
GETZCNT, this is done to prevent unnecessary bloat.
The task that triggered is reported with name (tsk->comm) and pid.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SUSv4 clearly defines how semncnt and semzcnt must be calculated: A task
waits on exactly one semaphore: The semaphore from the first operation
in the sop array that cannot proceed.
The Linux implementation never followed the standard, it tried to count
all semaphores that might be the reason why a task sleeps.
This patch fixes that.
Note:
a) The implementation assumes that GETNCNT and GETZCNT are rare operations,
therefore the code counts them only on demand.
(If they wouldn't be rare, then the non-compliance would have
been found earlier)
b) compared to the initial version of the patch, the BUG_ONs were removed
and it was clarified that the new behavior conforms to SUS.
Back-compatibility concerns:
Manfred:
: - there is no application in Fedora that uses GETNCNT or GETZCNT.
:
: - application that use only single-sop semop() are also safe, the
: difference only affects complex apps.
:
: - portable application are also safe, the new behavior is standard
: compliant.
:
: But that's it. The old behavior existed in Linux from 0.99.something
: until now.
Michael:
: * These operations seem to be very little used. Grepping the public
: source that is contained Fedora 20 source DVD, there appear to be no
: uses. Of course, this says nothing about uses in private /
: non-mainstream FOSS code, but it seems likely that the same pattern
: is followed there.
:
: * The existing behavior is hard enough to understand that I suspect
: that no one understood it well enough to rely on it anyway
: (especially as that behavior contradicted both man page and POSIX).
:
: So, there's a chance of breakage, but I estimate that it's minute.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now, perform_atomic_semop gets the content of sem_queue as
individual fields. Changes that, instead pass a pointer to sem_queue.
This is a preparation for the next patch: it uses sem_queue to store the
reason why a task must sleep.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
count_semzcnt and count_semncnt are more of less identical. The patch
creates a single function that either counts the number of tasks waiting
for zero or waiting due to a decrease operation.
Compared to the initial version, the BUG_ONs were removed.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GETZCNT is supposed to return the number of threads that wait until a
semaphore value becomes 0.
The current implementation overlooks complex operations that contain
both wait-for-zero operation and operations that alter at least one
semaphore.
The patch fixes that. It's intentionally copy&paste, this will be
cleaned up in the next patch.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
System V shared memory
a) can be abused to trigger out-of-memory conditions and the standard
measures against out-of-memory do not work:
- it is not possible to use setrlimit to limit the size of shm segments.
- segments can exist without association with any processes, thus
the oom-killer is unable to free that memory.
b) is typically used for shared information - today often multiple GB.
(e.g. database shared buffers)
The current default is a maximum segment size of 32 MB and a maximum
total size of 8 GB. This is often too much for a) and not enough for
b), which means that lots of users must change the defaults.
This patch increases the default limits (nearly) to the maximum, which
is perfect for case b). The defaults are used after boot and as the
initial value for each new namespace.
Admins/distros that need a protection against a) should reduce the
limits and/or enable shm_rmid_forced.
Unix has historically required setting these limits for shared memory,
and Linux inherited such behavior. The consequence of this is added
complexity for users and administrators. One very common example are
Database setup/installation documents and scripts, where users must
manually calculate the values for these limits. This also requires
(some) knowledge of how the underlying memory management works, thus
causing, in many occasions, the limits to just be flat out wrong.
Disabling these limits sooner could have saved companies a lot of time,
headaches and money for support. But it's never too late, simplify
users life now.
Further notes:
- The patch only changes default, overrides behave as before:
# sysctl kernel.shmall=33554432
would recreate the previous limit for SHMMAX (for the current namespace).
- Disabling sysv shm allocation is possible with:
# sysctl kernel.shmall=0
(not a new feature, also per-namespace)
- The limits are intentionally set to a value slightly less than ULONG_MAX,
to avoid triggering overflows in user space apps.
[not unreasonable, see http://marc.info/?l=linux-mm&m=139638334330127]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reported-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SHMMAX is the upper limit for the size of a shared memory segment, counted
in bytes. The actual allocation is that size, rounded up to the next full
page.
Add a check that prevents the creation of segments where the rounded up
size causes an integer overflow.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shm_tot counts the total number of pages used by shm segments.
If SHMALL is ULONG_MAX (or nearly ULONG_MAX), then the number can
overflow. Subsequent calls to shmctl(,SHM_INFO,) would return wrong
values for shm_tot.
The patch adds a detection for overflows.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The increase of SHMMAX/SHMALL is a 4 patch series.
The change itself is trivial, the only problem are interger overflows.
The overflows are not new, but if we make huge values the default, then
the code should be free from overflows.
SHMMAX:
- shmmem_file_setup places a hard limit on the segment size:
MAX_LFS_FILESIZE.
On 32-bit, the limit is > 1 TB, i.e. 4 GB-1 byte segments are
possible. Rounded up to full pages the actual allocated size
is 0. --> must be fixed, patch 3
- shmat:
- find_vma_intersection does not handle overflows properly.
--> must be fixed, patch 1
- the rest is fine, do_mmap_pgoff limits mappings to TASK_SIZE
and checks for overflows (i.e.: map 2 GB, starting from
addr=2.5GB fails).
SHMALL:
- after creating 8192 segments size (1L<<63)-1, shm_tot overflows and
returns 0. --> must be fixed, patch 2.
Userspace:
- Obviously, there could be overflows in userspace. There is nothing
we can do, only use values smaller than ULONG_MAX.
I ended with "ULONG_MAX - 1L<<24":
- TASK_SIZE cannot be used because it is the size of the current
task. Could be 4G if it's a 32-bit task on a 64-bit kernel.
- The maximum size is not standardized across archs:
I found TASK_MAX_SIZE, TASK_SIZE_MAX and TASK_SIZE_64.
- Just in case some arch revives a 4G/4G split, nearly
ULONG_MAX is a valid segment size.
- Using "0" as a magic value for infinity is even worse, because
right now 0 means 0, i.e. fail all allocations.
This patch (of 4):
find_vma_intersection() does not work as intended if addr+size overflows.
The patch adds a manual check before the call to find_vma_intersection.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to recreate the very same ipc_ops structure on every
kernel entry for msgget/semget/shmget. Just declare it static and be
done with it. While at it, constify it as we don't modify the structure
at runtime.
Found in the PaX patch, written by the PaX Team.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches
Fabian Frederick
Manfred Spraul
Davidlohr Bueso
Paul McQuade
Mathias Krause