Samsung Exynos (and older platforms) improvements for v4.6:
1. Split out Exynos PMU driver implementation from arm/mach-exynos
to the drivers/soc/samsung which will allow re-use of it on ARM64.
2. Use generic DT cpufreq driver on Exynos542x/5800.
3. Minor cleanups.
* tag 'samsung-soc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c24xx: Avoid warning for inb/outb
ARM: SAMSUNG: Remove unused register offset definition
ARM: EXYNOS: Cleanup header files inclusion
drivers: soc: samsung: Enable COMPILE_TEST
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
drivers: soc: Add support for Exynos PMU driver
ARM: EXYNOS: Split up exynos5420 SoC specific PMU data
ARM: EXYNOS: Split up exynos5250 SoC specific PMU data
ARM: EXYNOS: Split up exynos4 SoC specific PMU data
ARM: EXYNOS: Split up exynos3250 SoC specific PMU data
ARM: EXYNOS: Move pmu specific headers under "linux/soc/samsung"
ARM: EXYNOS: Correct header comment in Kconfig file
ARM: EXYNOS: Use generic cpufreq driver for Exynos5422/5800
ARM: EXYNOS: Use generic cpufreq driver for Exynos5420
ARM: s3c64xx: use "depends on" instead of "if" after prompt
ARM: plat-samsung: use to_platform_device()
ARM: EXYNOS: Code cleanup in map.h
ARM: EXYNOS: Remove unused static mapping of CMU for exynos5
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "STM32 SoC updates for v4.6 #2" from Maxime Coquelin:
Highlights:
-----------
- Add a new stm32f469 SoC
* tag 'stm32-soc-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: stm32: Identify a new SoC - STM32F469
Merge "omap soc changes for v4.6 merge window" from Tony Lindgren:
SoC related changes for omaps for v4.6 merge window:
- Enable runtime revision detection for dra7 to avoid multiple dts
files for various variants
- Add dma_slave_map for omap1/2/3 legacy mode booting
- Add RTC interconnect target data for ti81xx and am43x
- Add custom reset handler for PCIeSS
- Add eDMA interconnect target data for dra7
* tag 'omap-for-v4.6/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot
ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma
ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls
ARM: AM43XX: hwmod: Add rtc hwmod
ARM: DRA7: hwmod: Add reset data for PCIe
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
ARM: OMAP2+: hwmod data: Add SSI data for omap36xx
Merge "i.MX SoC update for 4.6" from Shawn Guo:
- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups
* tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
ARM: mx25: Add basic suspend/resume support
ARM: imx: Add msl code support for imx6qp
ARM: imx: enable big endian mode
ARM: imx: use endian-safe readl/readw/writel/writew
ARM: imx7d: correct chip version information
ARM: imx: select HAVE_ARM_ARCH_TIMER if selected i.MX7D
ARM: imx6: fix cleanup path in imx6q_suspend_init()
In an invalid randconfig build (fixed by another patch),
I ran across this warning:
arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
As Russell pointed out, we should never #define a macro starting
with CONFIG_ in a source file, as that is rather confusing.
This renames the macro to avoid the symbol clash.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ARM: OMAP2+: second set of hwmod changes for v4.6
These patches add RTC support for the AM43xx, and add support for
the DRA7xx eDMA controller's TPCC, TPTC0, and TPTC1 IP blocks.
Also included is a workaround for PRCM hardreset control of the DRA7xx
PCIe subsystem.
Note that I do not have a DRA7xx board, and therefore cannot
test any patches for that SoC family.
Basic build, boot, and PM test logs can be found here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-b-for-v4.6/20160301021258/
Add hwmod data for the eDMA blocks:
- TPCC: Third-party channel controller
- TPTC0: Third-party transfer controller 0
- TPTC1: Third-party transfer controller 1
The TPCC's clock gating status follows the status of its clock and
power domain. This means that the hwmod code can not directly control
the TPCC enable/disable status.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[paul@pwsan.com: rephrased last two sentences of the patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
dmaengine: pxa_dma: fix the maximum requestor line
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: pxa: pxa3xx device-tree support cleanup
ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
ARM: pxa: fix building without IWMMXT
ARM: pxa: move extern declarations to pm.h
ARM: pxa: always select one of the two CPU types
ARM: pxa: don't select GPIO_SYSFS for MIOA701
ARM: pxa: mark unused eseries code as __maybe_unused
ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
ARM: pxa: define clock registers as __iomem
All the generic L2 cache handling code is encapsulated by a
check if the L2 cache is enabled. If it's enabled already, the code
is skipped. The write to the L2-Cache controller from non-secure
world causes an imprecise external abort. This is needed in
scenarios where one of the cores runs an other OS, e.g. an RTOS.
For the i.MX6 specific L2 cache handling we missed this check.
Add it.
Signed-off-by: Marcel Grosshans <MarcelViktor.Grosshans@de.bosch.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX only needs to select ARM_CPU_SUSPEND manually for the
very specific case that CONFIG_PM_SLEEP is disabled and imx6
is used with CONFIG_PM enabled for runtime PM.
If we are building a kernel only for CPUs that are not using
the cpu_suspend() helper, we otherwise get a harmless
build warning:
warning: (ARCH_MXC && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM &&
EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
This moves the option to the SOC_IMX6 option that actually
requires it, in effect reverting commit f36b594f37 ("ARM:
mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level") that was
meant as a cleanup and unintentionally caused this warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Merge "Broadcom maintainers changes for 4.6" from Florian Fainelli:
This pull request contains MAINTAINERS file updates for Broadcom ARM-based SoCs:
- Florian updates the Broadcom BCM63xx ARM-based DSL SoCs to use the same mailing-list
and development tree as all the other Broadcom SoCS
* tag 'arm-soc/for-4.6/maintainers' of http://github.com/Broadcom/stblinux:
MAINTAINERS: ARM: BCM63xx: Update git and mailing-lists
Merge "Broadcom soc changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC/platform changes:
- Masahiro updates the Broadcom Northstar Plus SMP operations to be annotated
with const and __initconst
- Florian removes an unused variable in the Broadcom BCM63XX SMP code
* tag 'arm-soc/for-4.6/soc' of http://github.com/Broadcom/stblinux:
ARM: BCM63xx: Remove unused pmb_dn variable
ARM: bcm: use const and __initconst for smp_operations
The current number of requestor lines is limited to 31. This was an
error of a previous commit, as this number is platform dependent, and is
actually :
- for pxa25x: 40 requestor lines
- for pxa27x: 75 requestor lines
- for pxa3xx: 100 requestor lines
The previous testing did not reveal the faulty constant as on pxa[23]xx
platforms, only camera, MSL and USB are above requestor 32, and in these
only the camera has a driver using dma.
Fixes: e87ffbdf06 ("dmaengine: pxa_dma: fix the no-requestor case")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Declare the number of DMA requestor lines per platform :
- for pxa25x: 40 requestor lines
- for pxa27x: 75 requestor lines
- for pxa3xx: 100 requestor lines
This information will be used to activate the DMA flow control or not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The DMA chip has a fixed number of requestor lines used for flow
control. This number is platform dependent. The pxa_dma dma driver will
use this value to activate or not the flow control.
There won't be any impact on mmp_pdma driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
For pxa based platforms, the number of requestor lines should be
specified, so that the driver can check if the flow control should be
activated (when a requestor line is asked for) or not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Merge "ARM: Xilinx Zynq patches for v4.6" from Michal Simek:
- SLCR early init
- Fix L2 cache data corruption
- Fix early printk uart setting
* tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: zynq: address L2 cache data corruption
ARM: zynq: initialize slcr mapping earlier
Merge "DaVinci EDMA enhancements for v4.6" from Sekhar Nori:
Pass dma_slave_map data to EDMA driver. This will help
migration to new DMA engine API for requesting
slave channels dma_request_chan().
* tag 'davinci-for-v4.6/edma' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: dm646x: Add dma_slave_map to edma
ARM: davinci: dm644x: Add dma_slave_map to edma
ARM: davinci: dm365: Add dma_slave_map to edma
ARM: davinci: dm355: Add dma_slave_map to edma
ARM: davinci: devices-da8xx: Add dma_slave_map to edma
Merge "Renesas ARM Based SoC Updates for v4.6" from Simon Horman:
* Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
* Move emev2_smp_ops to emev2
* Remove legacy map_io callbacks on r8a7740 and emev2 SoCs
* Migrate to generic l2c OF initialization on r8a7740
* tag 'renesas-soc-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
ARM: shmobile: emev2: Move declaration of emev2_smp_ops to emev2.h
ARM: shmobile: emev2: Remove legacy machine_desc.map_io() callback
ARM: shmobile: r8a7740: Remove legacy machine_desc.map_io() callback
ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
Merge "ARM: mediatek: soc updates for v4.6" from Matthias Brugger:
Fix state machine implemenation of PMIC wrapper.
Add SMP support for mt7623.
Disable watchdog of STAUPD in PMIC wrapper for mt8173.
Add SMP support for mt2701.
Use builtin_platform_driver for scpsys. Driver can't be build as module.
Fix regulator enablement in scpsys.
* tag 'v4.5-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: SCPSYS: Fix double enabling of regulators
soc: mediatek: SCPSYS: use builtin_platform_driver
ARM: mediatek: add mt2701 smp bringup code
soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of WDT_SRC_EN
ARM: mediatek: add MT7623 smp bringup code
soc: mediatek: PMIC wrap: Clear the vldclr if state machine stay on FSM_VLDCLR state.
s3c24xx implements its own inb/outb macros, but the implementation
prints warnings when the port number argument is not a 32-bit scalar:
drivers/scsi/pas16.c: In function 'NCR5380_pwrite':
arch/arm/mach-s3c24xx/include/mach/io.h:193:68: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
This slightly modifies the definition of the __ioaddrc macro to avoid
the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Olof Johansson
Arnd Bergmann
Tony Lindgren
Peter Ujfalusi
Philipp Zabel
Dirk Behme
Robert Jarzmik
Antoine Tenart