enable_irq_wake() might fail, if so, we will see kernel warning in resume
entries due to it always calls disable_irq_wake().
WARNING: at kernel/irq/manage.c:529 irq_set_irq_wake+0xc4/0xf0()
Unbalanced IRQ 52 wake disable
Modules linked in: ipv6 libcomposite configfs
CPU: 0 PID: 1591 Comm: ash Tainted: G W 3.10.0-00854-gdbd86d4-dirty #100
(unwind_backtrace+0x0/0xf8) from (show_stack+0x10/0x14)
(show_stack+0x10/0x14) from (warn_slowpath_common+0x54/0x68)
(warn_slowpath_common+0x54/0x68) from (warn_slowpath_fmt+0x30/0x40)
(warn_slowpath_fmt+0x30/0x40) from (irq_set_irq_wake+0xc4/0xf0)
(irq_set_irq_wake+0xc4/0xf0) from (sirfsoc_rtc_restore+0x30/0x38)
(sirfsoc_rtc_restore+0x30/0x38) from (platform_pm_restore+0x2c/0x50)
(platform_pm_restore+0x2c/0x50) from (dpm_run_callback.clone.6+0x30/0xb0)
(dpm_run_callback.clone.6+0x30/0xb0) from (device_resume+0x88/0x134)
(device_resume+0x88/0x134) from (dpm_resume+0x114/0x230)
(dpm_resume+0x114/0x230) from (hibernation_snapshot+0x178/0x1d0)
(hibernation_snapshot+0x178/0x1d0) from (hibernate+0x130/0x1dc)
(hibernate+0x130/0x1dc) from (state_store+0xb4/0xc0)
(state_store+0xb4/0xc0) from (kobj_attr_store+0x14/0x20)
(kobj_attr_store+0x14/0x20) from (sysfs_write_file+0xfc/0x17c)
(sysfs_write_file+0xfc/0x17c) from (vfs_write+0xc8/0x194)
(vfs_write+0xc8/0x194) from (SyS_write+0x40/0x6c)
(SyS_write+0x40/0x6c) from (ret_fast_syscall+0x0/0x30)
To avoid unbalanced "IRQ wake disable", ensure that disable_irq_wake() is
called only when enable_irq_wake() have been successfully enabled.
Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
check_rtc_access_enable() returns pointer, thus NULL should be used
instead of 0 in order to fix the following sparse warning:
drivers/rtc/rtc-nuc900.c:102:16: warning: Using plain integer as NULL pointer
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stop processing hid input when registering the RTC fails and handle a NULL
returned from devm_rtc_device_register() as a failure too.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Palmas series device like TPS65913, TPS80036 supports the backup battery
for powering the RTC when no other energy source is available.
The backup battery is optional, connected to the VBACKUP pin, and can be
nonrechargeable or rechargeable. The rechargeable battery can be charged
from the system supply using the backup battery charger.
Add support for enabling charging of this backup battery. Also add the DT
binding document and the new properties to have this support.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to get the module automatically loaded by hotplug mechanisms a
MODULE_DEVICE_TABLE is needed.
Therefore add one.
This makes it also possible to use a module name other than
HID-SENSOR-2000a0 which isn't very descriptive in kernel messages.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the general-instruction extension facility (z10) a couple of
instructions with a pc-relative long displacement were introduced. The
kprobes support for these instructions however was never implemented.
In result, if anybody ever put a probe on any of these instructions the
result would have been random behaviour after the instruction got executed
within the insn slot.
So lets add the missing handling for these instructions. Since all of the
new instructions have 32 bit signed displacement the easiest solution is
to allocate an insn slot that is within the same 2GB area like the
original instruction and patch the displacement field.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current two insn slot caches both use module_alloc/module_free to
allocate and free insn slot cache pages.
For s390 this is not sufficient since there is the need to allocate insn
slots that are either within the vmalloc module area or within dma memory.
Therefore add a mechanism which allows to specify an own allocator for an
own insn slot cache.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current kpropes insn caches allocate memory areas for insn slots
with module_alloc(). The assumption is that the kernel image and module
area are both within the same +/- 2GB memory area.
This however is not true for s390 where the kernel image resides within
the first 2GB (DMA memory area), but the module area is far away in the
vmalloc area, usually somewhere close below the 4TB area.
For new pc relative instructions s390 needs insn slots that are within
+/- 2GB of each area. That way we can patch displacements of
pc-relative instructions within the insn slots just like x86 and
powerpc.
The module area works already with the normal insn slot allocator,
however there is currently no way to get insn slots that are within the
first 2GB on s390 (aka DMA area).
Therefore this patch set modifies the kprobes insn slot cache code in
order to allow to specify a custom allocator for the insn slot cache
pages. In addition architecure can now have private insn slot caches
withhout the need to modify common code.
Patch 1 unifies and simplifies the current insn and optinsn caches
implementation. This is a preparation which allows to add more
insn caches in a simple way.
Patch 2 adds the possibility to specify a custom allocator.
Patch 3 makes s390 use the new insn slot mechanisms and adds support for
pc-relative instructions with long displacements.
This patch (of 3):
The two insn caches (insn, and optinsn) each have an own mutex and
alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()).
Since there is the need for yet another insn cache which satifies dma
allocations on s390, unify and simplify the current implementation:
- Move the per insn cache mutex into struct kprobe_insn_cache.
- Move the alloc/free functions to kprobe.h so they are simply
wrappers for the generic __get_insn_slot/__free_insn_slot functions.
The implementation is done with a DEFINE_INSN_CACHE_OPS() macro
which provides the alloc/free functions for each cache if needed.
- move the struct kprobe_insn_cache to kprobe.h which allows to generate
architecture specific insn slot caches outside of the core kprobes
code.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reported by Joe Perches: OOM messages generally aren't useful.
dmi_alloc is either a trivial front-end to kzalloc, and kzalloc already
does a dump_stack() when OOM, or for x86, dmi_alloc uses extend_brk
which BUGs when unsuccessful.
So we can remove all 6 such log messages in the dmi_scan driver, to
shrink the binary size (by 528 bytes on x86_64.)
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This comment predates the introduction of early_ioremap. Since then the
missing calls to dmi_iounmap have been added by Ingo and Yinghai in
commits 0d64484f7e ("x86: fix DMI ioremap leak") and 3212bff370
("x86: left over fix for leak of early_ioremp in dmi_scan") . That was
over 5 years ago so it is about time to drop this now misleading
comment.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As discussed recently on the arm [1] and lm-sensors [2] lists, it is
possible to use section markers on variables in a way which gcc doesn't
understand (or at least not the way the developer intended):
static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = {
does NOT put exynos4_plls in the .initdata section. The __initdata marker
can be virtually anywhere on the line, EXCEPT right after "struct". The
preferred location is before the "=" sign if there is one, or before the
trailing ";" otherwise.
[1] http://permalink.gmane.org/gmane.linux.ports.arm.kernel/258149
[2] http://lists.lm-sensors.org/pipermail/lm-sensors/2013-August/039836.html
So, update checkpatch to find these misuses and report an error when it's
immediately after struct or union, and a warning when it's otherwise not
immediately before the ; or =.
A similar patch was suggested by Andi Kleen
https://lkml.org/lkml/2013/8/5/648
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A previous patch ("checkpatch: add --types option to report only
specific message types") uses a perl syntax introduced in perl version
5.14.
Use the backward compatible perl syntax instead.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are some cases where checkpatch can take a long time to complete.
Reduce the likelihood of this long run-time by adding a new test for lines
with and without comments and eliminating checks on lines with only
comments.
This reduces the number of "ctx_statement_block" calls, and also the
number of tests of $stat, which is now undefined for these blank lines.
One test in particular, the "check for switch/default statements without a
break", could take an extremely long time to parse as it tries to skip
interleaving comments within the ctx_statement_block/$stat and that could
be done multiple times unnecessarily.
A small test case taken from cfg80211.h before this patch would take
1000's of seconds to run, now it's just a couple seconds.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previous attempt at fixing SPACING errors could make a hash of several
defects.
This patch should make --fix be a lot better at correcting these defects.
Trim left and right sides of these defects appropriately instead of a
somewhat random attempt at it.
Trim left spaces from any following bit of the modified line when only a
single space is required around an operator.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Phil Carmody <phil.carmody@partner.samsung.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The tracing subsystem uses slightly odd #defines to set path/directory
locations for include files.
These #defines can cause false positives for the complex macro tests so
add exclusions for these specific #defines (TRACE_SYSTEM,
TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH).
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a --types convenience option to show only specific message types.
Combined with the --fix option, this can produce specific suggested
formatting patches to files.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch can generate a false positive when inserting a new kernel-doc
block and function above an existing kernel-doc block.
Fix it by checking that the context line is also a newly inserted line.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using the extern keyword on function prototypes is superfluous visual
noise so suggest removing it.
Using extern can cause unnecessary line wrapping at 80 columns and
unnecessarily long multi-line function prototypes.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xianglong Du
Jingoo Han
Sangjung Woo
Alexander Holler
Laxman Dewangan
Hebbar Gururaja
Jonas Jensen
Sachin Kamat
Heiko Carstens
Jean Delvare
Eric Dumazet
Joe Perches