Some earlier tip/core/rcu patches caused RCU to incorrectly enable irqs
too early in boot. This caused Yinghai's repeated-kexec testing to
hit oopses, presumably due to so that device interrupts left over from
the prior kernel instance (which would oops the newly booting kernel
before it got a chance to reset said devices). This patch therefore
converts all the local_irq_disable()s in rcuclassic.c to local_irq_save().
Besides, I never did like local_irq_disable() anyway. ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
CC kernel/rcuclassic.o
kernel/rcuclassic.c: In function '__rcu_process_callbacks':
kernel/rcuclassic.c:561: error: 'flags' undeclared (first use in this function)
kernel/rcuclassic.c:561: error: (Each undeclared identifier is reported only once
kernel/rcuclassic.c:561: error: for each function it appears in.)
Declare missing variable flags.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Given that the rcp->lock is now acquired from call_rcu(), which can be
invoked from irq-disable regions, all acquisitions need to disable irqs.
The following patch fixes this.
Although I don't have any reason to believe that this is the cause of
Yinghai's oops, it does need to be fixed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the redundant definition of ACCESS_ONCE() from rcupreempt.c in
favor of the one in compiler.h. Also merge the comment header from
rcupreempt.c's definition into that in compiler.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the initialization of the RCU trace module, if
rcupreempt_debugfs_init() fails, we never free the the trace buffer.
This patch frees the trace buffer in case the debugfs fails.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Seems that I found a box that has a config that passes call_rcu_bh as a
function pointer (see net/sctp/sm_make_chunk.c), so declaring the
call_rcu_bh has a macro function isn't good enough.
This patch makes it just another name of call_rcu for rcupreempt.
Signed-off-by: Steven Rostedt <srostedt@redhat.org>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All of the in-tree uses of list_for_each_rcu() have been converted to
list_for_each_entry_rcu(), so list_for_each_rcu() can now be removed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hello!
Compared tip/core/rcu to my latest patchset, and found the following
issues:
o the memory barrier in rcu_exit_nohz() somehow got out of place
(it is correct in mainline as of 2.6.26-rc7).
o There is a duplicate declaration of rcu_dyntick_sched.
The attached patch fixes these.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch simplifies the locking and memory-barrier usage in the Classic
RCU grace-period-detection mechanism, incorporating Lai Jiangshan's
feedback from the earlier version (http://lkml.org/lkml/2008/8/1/400
and http://lkml.org/lkml/2008/8/3/43). Passed 10 hours of
rcutorture concurrent with CPUs being put online and taken offline on
a 128-hardware-thread Power machine. My apologies to whoever in the
Eastern Hemisphere was planning to use this machine over the Western
Hemisphere night, but it was sitting idle and...
So this is ready for tip/core/rcu.
This patch is in preparation for moving to a hierarchical
algorithm to allow the very large SMP machines -- requested by some
people at OLS, and there seem to have been a few recent patches in the
4096-CPU direction as well. The general idea is to move to a much more
conservative concurrency design, then apply a hierarchy to reduce
contention on the global lock by a few orders of magnitude (larger
machines would see greater reductions). The reason for taking a
conservative approach is that this code isn't on any fast path.
Prototype in progress.
This patch is against the linux-tip git tree (tip/core/rcu). If you
wish to test this against 2.6.26, use the following set of patches:
http://www.rdrop.com/users/paulmck/patches/2.6.26-ljsimp-1.patchhttp://www.rdrop.com/users/paulmck/patches/2.6.26-ljsimpfix-3.patch
The first patch combines commits 5127bed588
and 3cac97cbb1 from Lai Jiangshan
<laijs@cn.fujitsu.com>, and the second patch contains my changes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
One small change needed to keep from flooding the console when one
CPU notices that another is AWOL. Unless I am missing something subtle.
Otherwise the cleanups look good!
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
this is a diagnostic patch for Classic RCU.
The approach is to record a timestamp at the beginning
of the grace period (in rcu_start_batch()), then have
rcu_check_callbacks() complain if:
1. it is running on a CPU that has holding up grace periods for
a long time (say one second). This will identify the culprit
assuming that the culprit has not disabled hardware irqs,
instruction execution, or some such.
2. it is running on a CPU that is not holding up grace periods,
but grace periods have been held up for an even longer time
(say two seconds).
It is enabled via the default-off CONFIG_DEBUG_RCU_STALL kernel parameter.
Rather than exponential backoff, it backs off to once per 30 seconds.
My feeling upon thinking on it was that if you have stalled RCU grace
periods for that long, a few extra printk() messages are probably the
least of your worries...
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ][2/2] preregister support for powernow-k8
[CPUFREQ][1/2] whitespace fix for powernow-k8
[CPUFREQ] Update MAINTAINERS to reflect new mailing list.
[CPUFREQ] Fix warning in elanfreq
[CPUFREQ] Fix -Wshadow warning in conservative governor.
[CPUFREQ] Remove EXPERIMENTAL annotation from VIA C7 powersaver kconfig.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] list entry can not return null
turn cifs_setattr into a multiplexor that calls the correct function
move file time and dos attribute setting logic into new function
spin off cifs_setattr with unix extensions to its own function
[CIFS] Code cleanup in old sessionsetup code
[CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir
Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg
change CIFSSMBSetTimes to CIFSSMBSetPathInfo
[CIFS] fix trailing whitespace
bundle up Unix SET_PATH_INFO args into a struct and change name
Fix missing braces in cifs_revalidate()
remove locking around tcpSesAllocCount atomic variable
[CIFS] properly account for new user= field in SPNEGO upcall string allocation
[CIFS] remove level of indentation from decode_negTokenInit
[CIFS] cifs send2 not retrying enough in some cases on full socket
[CIFS] oid should also be checked against class in cifs asn
Fix fatal multi-line kernel-doc error in list.h:
function short description must be on one line.
Error(linux-2.6.27-rc2-git3//include/linux/list.h:318): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch provides support for the _PSD ACPI object in the Powernow-k8
driver. Although it looks like an invasive patch, most of it is
simply the consequence of turning the static acpi_performance_data
structure into a pointer.
AMD has tested it on several machines over the past few days without issue.
[trivial checkpatch warnings fixed up by davej]
[X86_POWERNOW_K8_ACPI=n buildfix from Randy Dunlap]
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Tested-by: Frank Arnold <frank.arnold@amd.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>
arch/x86/kernel/cpu/cpufreq/elanfreq.c:47:26: warning: symbol 'elan_multiplier' was not declared. Should it be static?
Yes, yes it should.
Signed-off-by: Dave Jones <davej@redhat.com>
drivers/cpufreq/cpufreq_conservative.c:336:15: warning: symbol 'freq_step' shadows an earlier one
Just rename the local variable.
Signed-off-by: Dave Jones <davej@redhat.com>
* 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5177/1: arm/mach-sa1100/Makefile: remove CONFIG_SA1100_USB
[ARM] 5166/1: magician: add MAINTAINERS entry
[ARM] fix pnx4008 build errors
[ARM] Fix SMP booting with non-zero PHYS_OFFSET
[ARM] 5185/1: Fix spi num_chipselect for lubbock
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
[ARM] Add support for arch/arm/mach-*/include and arch/arm/plat-*/include
[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
[ARM] Eliminate useless includes of asm/mach-types.h
[ARM] Fix circular include dependency with IRQ headers
avr32: Use <mach/foo.h> instead of <asm/arch/foo.h>
avr32: Introduce arch/avr32/mach-*/include/mach
avr32: Move include/asm-avr32 to arch/avr32/include/asm
[ARM] sa1100_wdt: use reset_status to remember watchdog reset status
[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage
[ARM] pxa: introduce reset.h for reset specific header information
Paul E. McKenney
Hiroshi Shimamoto
Steven Rostedt
Ingo Molnar
Linus Torvalds
Randy Dunlap
Steve French
Mark Langsdorf
Dave Jones