Commit Graph

589456 Commits

Author SHA1 Message Date
Xinliang Liu 23e7b2ab9a drm/hisilicon: Add hisilicon kirin drm master driver
Add kirin DRM master driver for hi6220 SoC which used in HiKey board.
Add dumb buffer feature.
Add prime dmabuf feature.

v9: Add OF and ARM64 depends on in Kconfig
v8: None.
v7:
- Add config.mutex protection when accessing mode_config.connector_list.
- Clean up match data getting.
v6: None.
v5: None.
v4: None.
v3:
- Move and rename all the files to kirin sub-directory.
  So that we could separate different seires SoCs' driver.
- Replace drm_platform_init, load, unload implementation.
v2:
- Remove abtraction layer.

Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
2016-04-29 16:39:04 +08:00
Xinliang Liu 284aabb0e8 drm/hisilicon: Add device tree binding for hi6220 display subsystem
Add ADE display controller binding doc.
Add DesignWare DSI Host Controller v1.20a binding doc.

v8: None.
v7: Acked by Rob Herring.
v6:
- Cleanup values part of reg and clocks properties.
- Change "pclk_dsi" clock name to "pclk".
v5:
- Remove endpoint unit address of dsi output port.
- Add "hisilicon,noc-syscon" property for ADE NOC QoS syscon.
- Add "resets" property for ADE reset.
v4:
- Describe more specific of clocks and ports.
- Fix indentation.
v3:
- Make ade as the drm master node.
- Use assigned-clocks to set clock rate.
- Use ports to connect display relavant nodes.
v2:
- Move dt binding docs to bindings/display/hisilicon directory.

Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
2016-04-29 16:37:42 +08:00
Dave Airlie b89359bdf0 Merge branch 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next
This adds very rudimentary TCON (timing controller for raw LCD displays)
support to enable the bypass mode in order to use the DCU controller on
Freescale/NXP Vybrid SoC's.

Additionally the register clock and pixel clock has been separated, but
are currently still enabled and disabled pairwise.

Other than that, fixes and cleanups accross the driver.

* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: increment version and date
  drm/fsl-dcu: implement lastclose callback
  drm/fsl-dcu: disable output polling on driver unload
  drm/fsl-dcu: deallocate fbdev CMA on unload
  drm/fsl-dcu: use variable name dev for struct drm_device
  drm/fsl-dcu: handle missing panel gracefully
  drm/fsl-dcu: detach panel on destroy
  drm/layerscape: reduce excessive stack usage
  drm/fsl-dcu: add TCON driver
  drm/fsl-dcu: use common clock framework for pixel clock divider
  drm/fsl-dcu: add extra clock for pixel clock
  drm/fsl-dcu: disable clock on initialization failure and remove
2016-04-29 14:57:51 +10:00
Dave Airlie d3a8f6784a Merge tag 'sun4i-drm-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM driver for 4.7

This pull request introduces the sun4i driver, meant to be used on the
older Allwinner SoCs (A10, A13, A20, A23, A31 and A33).

It currently supports only the A13, which has one of the simplest video
pipeline. Support for other video components and SoCs will be added
eventually.

It supports only a RGB or composite output. It doesn't do HDMI, VGA, LVDS
or power management yet, but that will come in time as well.

* tag 'sun4i-drm-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  MAINTAINERS: Add a maintainer for the Allwinner DRM driver
  drm: sun4i: tv: Add NTSC output standard
  drm: sun4i: tv: Add PAL output standard
  drm: sun4i: Add composite output
  drm: sun4i: Add RGB output
  drm: Add Allwinner A10 Display Engine support
  drm: sun4i: Add DT bindings documentation
  drm: fb: Add seq_file definition
2016-04-29 14:52:41 +10:00
Maxime Ripard bf1139dfe7 MAINTAINERS: Add a maintainer for the Allwinner DRM driver
Add myself as the maintainer of the new Allwinner DRM driver.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 2ff77b1659 drm: sun4i: tv: Add NTSC output standard
Add the settings to support the NTSC standard.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 154f695007 drm: sun4i: tv: Add PAL output standard
Now that we have support for the composite output, we can start adding new
supported standards. Start with PAL, and we will add other eventually.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 03c4c71d25 drm: sun4i: Add composite output
Some Allwinner SoCs have an IP called the TV encoder that is used to output
composite and VGA signals. In such a case, we need to use the second TCON
channel.

Add support for that TV encoder.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 29e57fab97 drm: sun4i: Add RGB output
One of the A10 display pipeline possible output is an RGB interface to
drive LCD panels directly. This is done through the first channel of the
TCON that will output our video signals directly.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 9026e0d122 drm: Add Allwinner A10 Display Engine support
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.

Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 21a454fd36 drm: sun4i: Add DT bindings documentation
The display pipeline of the Allwinner A10 is involving several loosely
coupled components.

Add a documentation for the bindings.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard 80588a86af drm: fb: Add seq_file definition
Otherwise, building with DEBUG_FS enabled will trigger a build warning
because we're using a structure that has not been declared.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Daniel Vetter 152ef5fa9e drm: Switch blobs to the new generic modeset obj refcounting
Need to move the free function around a bit, but otherwise mostly
just removing code.

Specifically we can nuke all the _locked variants since the weak idr
reference is now protected by the idr_mutex, which we never hold
anywhere expect in the lookup/reg/unreg functions. And those never
call anything else.

Another benefit of this is that this patch switches the weak reference
logic from kref_put_mutex to kref_get_unless_zero. And the later is in
general more flexible wrt accomodating multiple weak references
protected by different locks, which might or might not come handy
eventually.

But one consequence of that switch is that we need to acquire the
blob_lock from the free function for the list_del calls. That's a bit
tricky to pull off, but works well if we pick the exact same scheme as
is already used for framebuffers. Most important changes:

- filp list is maintainer by create/destroy_blob ioctls directly
  (already the case, so we can just remove the redundant list_del from
  the free function).

- filp close handler walks the filp-private list lockless - works
  because we know no one else can access it. I copied the same comment
  from the fb code over to explain this.

- Otherwise we need to sufficiently restrict blob_lock critical
  sections to avoid all the unreference calls. Easy to do once the
  blob_lock only protects the list, and no longer the weak reference.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27 09:58:05 +10:00
Daniel Vetter b0b5511bdf drm/atomic-helpers: Don't duplicate code in destroy helpers
Random drive-by refactoring I spotted.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27 09:56:30 +10:00
Daniel Vetter 1649c33ba3 drm: Fix fb leaks and WARN spew in get/set_prop ioctls
Dave Airlie had at least the refcount leak fixed in a later patch (but
that patch does other things which need a bit more work). But we still
have the trouble that silly userspace could hit the WARN_ON in
drm_mode_object_find.

Fix this all up to make sure we don't leak objects, and don't spew
into demsg.

Fixes: d0f37cf629 ("drm/mode: move framebuffer reference into object.")
Testcase: igt/kms_addfb_basic/invalid-*-prop*
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27 09:53:54 +10:00
Daniel Vetter 05981422ea drm: Improve kerneldoc for new mode object refcounting
Slipped through the cracks in my review. The one issue I spotted
is that drm_mode_object_find now acquires references and can be
used on FB objects, which caused follow-on bugs in get/set_prop ioctls.
Follow-up patches will fix that.

[airlied: fixup some incr fb/decr object mixups]

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27 09:52:59 +10:00
Dave Airlie 944a3f323b Merge branch 'topic-arcpgu-v6' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next
This is DRM driver for ARC PGU - simple bitstreamer used on
Synopsys ARC SDP boards (both AXS101 and AXS103).

* 'topic-arcpgu-v6' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
  arc: axs10x - add support of ARC PGU
  MAINTAINERS: Add maintainer for ARC PGU display controller
  drm: Add DT bindings documentation for ARC PGU display controller
  drm: Add support of ARC PGU display controller
2016-04-27 09:38:42 +10:00
Emil Velikov 33f0fca6b4 drm/sis: add missing include drm.h for the UAPI header
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27 09:36:48 +10:00
Emil Velikov f7a3e1dc8f drm/qxl: remove XXX comment from the UAPI header
One cannot rename the struct at this point, so might as well remove the
comment.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27 09:36:21 +10:00
Dave Airlie 69056e9a43 Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
misc rcar changes.

* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Fix compilation warning
  drm: rcar-du: Use ARCH_RENESAS
  drm: rcar-du: Clarify vsp dependency
2016-04-27 09:19:50 +10:00
Alexey Brodkin b8c1eca1e0 arc: axs10x - add support of ARC PGU
Synopsys DesignWare ARC SDP boards sport ARC SDP display
controller attached to ADV7511 HDMI encoder.

That change adds desctiption of both ARC PGU and ADV7511 in
ARC SDP'd base-board Device Tree.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: devicetree@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
2016-04-26 18:26:54 +03:00
Alexey Brodkin 71d298ceff MAINTAINERS: Add maintainer for ARC PGU display controller
This updates MAINTEINERS file with information about maintainer of
ARC PGU display controller driver.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
2016-04-26 18:26:54 +03:00
Alexey Brodkin a1f8ebe5cf drm: Add DT bindings documentation for ARC PGU display controller
This add DT bindings documentation for ARC PGU display controller.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Rob Herring <robh@kernel.org>
2016-04-26 18:26:45 +03:00
Carlos Palminha 51dacf2089 drm: Add support of ARC PGU display controller
ARC PGU could be found on some development boards from Synopsys.
This is a simple byte streamer that reads data from a framebuffer
and sends data to the single encoder.

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-snps-arc@lists.infradead.org
2016-04-26 17:58:02 +03:00
Stefan Agner 0449eefe2d drm/fsl-dcu: increment version and date
The driver supports now a second platform and received several
fixes, hence a version increment is justified.

Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25 23:27:08 -07:00