Just like kmalloc will allow one to allocate a 0 length segment of memory
flex arrays should do the same thing. It should bomb if you try to use
something, but it should at least allow the allocation.
This is needed because when SELinux switched to using flex_arrays in 2.6.38
the inability to allocate a 0 length array resulted in SELinux policy load
returning -ENOSPC when previously it worked.
Based-on-patch-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by: Chris Richards <gizmo@giz-works.com>
Cc: stable@kernel.org [2.6.38+]
Change flex_array_prealloc to take the number of elements for which space
should be allocated instead of the last (inclusive) element. Users
and documentation are updated accordingly. flex_arrays got introduced before
they had users. When folks started using it, they ended up needing a
different API than was coded up originally. This swaps over to the API that
folks apparently need.
Based-on-patch-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by: Chris Richards <gizmo@giz-works.com>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: stable@kernel.org [2.6.38+]
New inodes are created in a two stage process. We first will compute the
label on a new inode in security_inode_create() and check if the
operation is allowed. We will then actually re-compute that same label and
apply it in security_inode_init_security(). The change to do new label
calculations based in part on the last component of the path name only
passed the path component information all the way down the
security_inode_init_security hook. Down the security_inode_create hook the
path information did not make it past may_create. Thus the two calculations
came up differently and the permissions check might not actually be against
the label that is created. Pass and use the same information in both places
to harmonize the calculations and checks.
Reported-by: Dominick Grift <domg472@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
To shorten the list we need to run if filename trans rules exist for the type
of the given parent directory I put them in a hashtable. Given the policy we
are expecting to use in Fedora this takes the worst case list run from about
5,000 entries to 17.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Instead of a hashtab entry counter function only useful for range
transition rules make a function generic for any hashtable to use.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
We have custom debug functions like rangetr_hash_eval and symtab_hash_eval
which do the same thing. Just create a generic function that takes the name
of the hash table as an argument instead of having custom functions.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Right now we walk to filename trans rule list for every inode that is
created. First passes at policy using this facility creates around 5000
filename trans rules. Running a list of 5000 entries every time is a bad
idea. This patch adds a new ebitmap to policy which has a bit set for each
ttype that has at least 1 filename trans rule. Thus when an inode is
created we can quickly determine if any rules exist for this parent
directory type and can skip the list if we know there is definitely no
relevant entry.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
filename_compute_type() takes as arguments the numeric value of the type of
the subject and target. It does not take a context. Thus the names are
misleading. Fix the argument names.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
filename_compute_type used to take a qstr, but it now takes just a name.
Fix the comments to indicate it is an objname, not a qstr.
Signed-off-by: Eric Paris <eparis@redhat.com>
smack_file_lock has a struct path, so use that instead of only the
dentry.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
This patch separates and audit message that only contains a dentry from
one that contains a full path. This allows us to make it harder to
misuse the interfaces or for the interfaces to be implemented wrong.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
The lsm common audit code has wacky contortions making sure which pieces
of information are set based on if it was given a path, dentry, or
inode. Split this into path and inode to get rid of some of the code
complexity.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Now that the security modules can decide whether they support the
dcache RCU walk or not it's possible to make selinux a bit more
RCU friendly. The SELinux AVC and security server access decision
code is RCU safe. A specific piece of the LSM audit code may not
be RCU safe.
This patch makes the VFS RCU walk retry if it would hit the non RCU
safe chunk of code. It will normally just work under RCU. This is
done simply by passing the VFS RCU state as a flag down into the
avc_audit() code and returning ECHILD there if it would have an issue.
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Right now all RCU walks fall back to reference walk when CONFIG_SECURITY
is enabled, even though just the standard capability module is active.
This is because security_inode_exec_permission unconditionally fails
RCU walks.
Move this decision to the low level security module. This requires
passing the RCU flags down the security hook. This way at least
the capability module and a few easy cases in selinux/smack work
with RCU walks with CONFIG_SECURITY=y
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The len should be an size_t but is a ssize_t. Easy enough fix to silence
build warnings. We have no need for signed-ness.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
If one builds a kernel without CONFIG_BUG there are a number of 'may be
used uninitialized' warnings. Silence these by returning after the BUG().
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
The filename_trans rule processing has some printk(KERN_ERR ) messages
which were intended as debug aids in creating the code but weren't removed
before it was submitted. Remove them.
Signed-off-by: Eric Paris <eparis@redhat.com>
Initialize policydb.process_class once all symtabs read from policy image,
so that it could be used to setup the role_trans.tclass field when a lower
version policy.X is loaded.
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Commit 6f5317e730 introduced a bug in the
handling of userspace object classes that is causing breakage for Xorg
when XSELinux is enabled. Fix the bug by changing map_class() to return
SECCLASS_NULL when the class cannot be mapped to a kernel object class.
Reported-by: "Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
The attached patch allows /selinux/create takes optional 4th argument
to support TYPE_TRANSITION with name extension for userspace object
managers.
If 4th argument is not supplied, it shall perform as existing kernel.
In fact, the regression test of SE-PostgreSQL works well on the patched
kernel.
Thanks,
Signed-off-by: KaiGai Kohei <kohei.kaigai@eu.nec.com>
[manually verify fuzz was not an issue, and it wasn't: eparis]
Signed-off-by: Eric Paris <eparis@redhat.com>
If kernel policy version is >= 26, then write the class field of the
role_trans structure into the binary reprensentation.
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
If kernel policy version is >= 26, then the binary representation of
the role_trans structure supports specifying the class for the current
subject or the newly created object.
If kernel policy version is < 26, then the class field would be default
to the process class.
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris
Andi Kleen
Harry Ciao
Stephen Smalley
Kohei Kaigai
Harry Ciao
James Morris