Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

MAINTAINERS

@@ -8563,12 +8563,11 @@ S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TI WILINK WIRELESS DRIVERS
-M:	Luciano Coelho <luca@coelho.fi>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 W:	http://wireless.kernel.org/en/users/Drivers/wl1251
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/ti/
 F:	include/linux/wl12xx.h
 

drivers/bcma/host_pci.c

@@ -269,7 +269,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend,
 
 #endif /* CONFIG_PM_SLEEP */
 
-static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+static const struct pci_device_id bcma_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },

drivers/bluetooth/ath3k.c

@@ -83,6 +83,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3005) },
 	{ USB_DEVICE(0x04CA, 0x3006) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
+	{ USB_DEVICE(0x04CA, 0x300b) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },
@@ -96,6 +97,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x0cf3, 0x3121) },
 	{ USB_DEVICE(0x0cf3, 0xe003) },
+	{ USB_DEVICE(0x0489, 0xe05f) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -125,6 +127,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -138,6 +141,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btmrvl_drv.h

@@ -23,8 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <net/bluetooth/bluetooth.h>
-#include <linux/ctype.h>
-#include <linux/firmware.h>
 
 #define BTM_HEADER_LEN			4
 #define BTM_UPLD_SIZE			2312
@@ -43,8 +41,6 @@ struct btmrvl_thread {
 struct btmrvl_device {
 	void *card;
 	struct hci_dev *hcidev;
-	struct device *dev;
-	const char *cal_data;
 
 	u8 dev_type;
 
@@ -90,12 +86,12 @@ struct btmrvl_private {
 
 #define MRVL_VENDOR_PKT			0xFE
 
-/* Bluetooth commands  */
-#define BT_CMD_AUTO_SLEEP_MODE		0x23
-#define BT_CMD_HOST_SLEEP_CONFIG	0x59
-#define BT_CMD_HOST_SLEEP_ENABLE	0x5A
-#define BT_CMD_MODULE_CFG_REQ		0x5B
-#define BT_CMD_LOAD_CONFIG_DATA		0x61
+/* Vendor specific Bluetooth commands */
+#define BT_CMD_AUTO_SLEEP_MODE		0xFC23
+#define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
+#define BT_CMD_HOST_SLEEP_ENABLE	0xFC5A
+#define BT_CMD_MODULE_CFG_REQ		0xFC5B
+#define BT_CMD_LOAD_CONFIG_DATA		0xFC61
 
 /* Sub-commands: Module Bringup/Shutdown Request/Response */
 #define MODULE_BRINGUP_REQ		0xF1
@@ -104,6 +100,11 @@ struct btmrvl_private {
 
 #define MODULE_SHUTDOWN_REQ		0xF2
 
+/* Vendor specific Bluetooth events */
+#define BT_EVENT_AUTO_SLEEP_MODE	0x23
+#define BT_EVENT_HOST_SLEEP_CONFIG	0x59
+#define BT_EVENT_HOST_SLEEP_ENABLE	0x5A
+#define BT_EVENT_MODULE_CFG_REQ		0x5B
 #define BT_EVENT_POWER_STATE		0x20
 
 /* Bluetooth Power States */
@@ -111,8 +112,6 @@ struct btmrvl_private {
 #define BT_PS_DISABLE			0x03
 #define BT_PS_SLEEP			0x01
 
-#define OGF				0x3F
-
 /* Host Sleep states */
 #define HS_ACTIVATED			0x01
 #define HS_DEACTIVATED			0x00
@@ -121,7 +120,7 @@ struct btmrvl_private {
 #define PS_SLEEP			0x01
 #define PS_AWAKE			0x00
 
-#define BT_CMD_DATA_SIZE		32
+#define BT_CAL_HDR_LEN			4
 #define BT_CAL_DATA_SIZE		28
 
 struct btmrvl_event {

drivers/bluetooth/btmrvl_main.c

@@ -19,7 +19,7 @@
  **/
 
 #include <linux/module.h>
-
+#include <linux/of.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
@@ -50,12 +50,10 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 
 	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
 		struct hci_ev_cmd_complete *ec;
-		u16 opcode, ocf, ogf;
+		u16 opcode;
 
 		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
 		opcode = __le16_to_cpu(ec->opcode);
-		ocf = hci_opcode_ocf(opcode);
-		ogf = hci_opcode_ogf(opcode);
 
 		if (priv->btmrvl_dev.sendcmdflag) {
 			priv->btmrvl_dev.sendcmdflag = false;
@@ -63,9 +61,8 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 			wake_up_interruptible(&priv->adapter->cmd_wait_q);
 		}
 
-		if (ogf == OGF) {
-			BT_DBG("vendor event skipped: ogf 0x%4.4x ocf 0x%4.4x",
-			       ogf, ocf);
+		if (hci_opcode_ogf(opcode) == 0x3F) {
+			BT_DBG("vendor event skipped: opcode=%#4.4x", opcode);
 			kfree_skb(skb);
 			return false;
 		}
@@ -89,7 +86,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 	}
 
 	switch (event->data[0]) {
-	case BT_CMD_AUTO_SLEEP_MODE:
+	case BT_EVENT_AUTO_SLEEP_MODE:
 		if (!event->data[2]) {
 			if (event->data[1] == BT_PS_ENABLE)
 				adapter->psmode = 1;
@@ -102,7 +99,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 		}
 		break;
 
-	case BT_CMD_HOST_SLEEP_CONFIG:
+	case BT_EVENT_HOST_SLEEP_CONFIG:
 		if (!event->data[3])
 			BT_DBG("gpio=%x, gap=%x", event->data[1],
 							event->data[2]);
@@ -110,7 +107,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			BT_DBG("HSCFG command failed");
 		break;
 
-	case BT_CMD_HOST_SLEEP_ENABLE:
+	case BT_EVENT_HOST_SLEEP_ENABLE:
 		if (!event->data[1]) {
 			adapter->hs_state = HS_ACTIVATED;
 			if (adapter->psmode)
@@ -121,7 +118,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 		}
 		break;
 
-	case BT_CMD_MODULE_CFG_REQ:
+	case BT_EVENT_MODULE_CFG_REQ:
 		if (priv->btmrvl_dev.sendcmdflag &&
 				event->data[1] == MODULE_BRINGUP_REQ) {
 			BT_DBG("EVENT:%s",
@@ -166,7 +163,7 @@ exit:
 }
 EXPORT_SYMBOL_GPL(btmrvl_process_event);
 
-static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
+static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 opcode,
 				const void *param, u8 len)
 {
 	struct sk_buff *skb;
@@ -179,7 +176,7 @@ static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
 	}
 
 	hdr = (struct hci_command_hdr *)skb_put(skb, HCI_COMMAND_HDR_SIZE);
-	hdr->opcode = cpu_to_le16(hci_opcode_pack(OGF, cmd_no));
+	hdr->opcode = cpu_to_le16(opcode);
 	hdr->plen = len;
 
 	if (len)
@@ -417,127 +414,62 @@ static int btmrvl_open(struct hci_dev *hdev)
 	return 0;
 }
 
-/*
- * This function parses provided calibration data input. It should contain
- * hex bytes separated by space or new line character. Here is an example.
- * 00 1C 01 37 FF FF FF FF 02 04 7F 01
- * CE BA 00 00 00 2D C6 C0 00 00 00 00
- * 00 F0 00 00
- */
-static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+static int btmrvl_download_cal_data(struct btmrvl_private *priv,
+				    u8 *data, int len)
 {
-	const u8 *s = src;
-	u8 *d = dst;
 	int ret;
-	u8 tmp[3];
-
-	tmp[2] = '\0';
-	while ((s - src) <= len - 2) {
-		if (isspace(*s)) {
-			s++;
-			continue;
-		}
-
-		if (isxdigit(*s)) {
-			if ((d - dst) >= dst_size) {
-				BT_ERR("calibration data file too big!!!");
-				return -EINVAL;
-			}
-
-			memcpy(tmp, s, 2);
-
-			ret = kstrtou8(tmp, 16, d++);
-			if (ret < 0)
-				return ret;
-
-			s += 2;
-		} else {
-			return -EINVAL;
-		}
-	}
-	if (d == dst)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int btmrvl_load_cal_data(struct btmrvl_private *priv,
-				u8 *config_data)
-{
-	int i, ret;
-	u8 data[BT_CMD_DATA_SIZE];
 
 	data[0] = 0x00;
 	data[1] = 0x00;
 	data[2] = 0x00;
-	data[3] = BT_CMD_DATA_SIZE - 4;
-
-	/* Swap cal-data bytes. Each four bytes are swapped. Considering 4
-	 * byte SDIO header offset, mapping of input and output bytes will be
-	 * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
-	 * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
-	for (i = 4; i < BT_CMD_DATA_SIZE; i++)
-		data[i] = config_data[(i / 4) * 8 - 1 - i];
+	data[3] = len;
 
 	print_hex_dump_bytes("Calibration data: ",
-			     DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+			     DUMP_PREFIX_OFFSET, data, BT_CAL_HDR_LEN + len);
 
 	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
-				   BT_CMD_DATA_SIZE);
+				   BT_CAL_HDR_LEN + len);
 	if (ret)
 		BT_ERR("Failed to download caibration data\n");
 
 	return 0;
 }
 
-static int
-btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+static int btmrvl_cal_data_dt(struct btmrvl_private *priv)
 {
-	u8 cal_data[BT_CAL_DATA_SIZE];
+	struct device_node *dt_node;
+	u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
+	const char name[] = "btmrvl_caldata";
+	const char property[] = "btmrvl,caldata";
 	int ret;
 
-	ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+	dt_node = of_find_node_by_name(NULL, name);
+	if (!dt_node)
+		return -ENODEV;
+
+	ret = of_property_read_u8_array(dt_node, property,
+					cal_data + BT_CAL_HDR_LEN,
+					BT_CAL_DATA_SIZE);
 	if (ret)
 		return ret;
 
-	ret = btmrvl_load_cal_data(priv, cal_data);
+	BT_DBG("Use cal data from device tree");
+	ret = btmrvl_download_cal_data(priv, cal_data, BT_CAL_DATA_SIZE);
 	if (ret) {
-		BT_ERR("Fail to load calibrate data");
+		BT_ERR("Fail to download calibrate data");
 		return ret;
 	}
 
 	return 0;
 }
 
-static int btmrvl_cal_data_config(struct btmrvl_private *priv)
-{
-	const struct firmware *cfg;
-	int ret;
-	const char *cal_data = priv->btmrvl_dev.cal_data;
-
-	if (!cal_data)
-		return 0;
-
-	ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
-	if (ret < 0) {
-		BT_DBG("Failed to get %s file, skipping cal data download",
-		       cal_data);
-		return 0;
-	}
-
-	ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
-	release_firmware(cfg);
-	return ret;
-}
-
 static int btmrvl_setup(struct hci_dev *hdev)
 {
 	struct btmrvl_private *priv = hci_get_drvdata(hdev);
 
 	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
 
-	if (btmrvl_cal_data_config(priv))
-		BT_ERR("Set cal data failed");
+	btmrvl_cal_data_dt(priv);
 
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);

drivers/bluetooth/btmrvl_sdio.c

@@ -18,6 +18,7 @@
  * this warranty disclaimer.
  **/
 
+#include <linux/firmware.h>
 #include <linux/slab.h>
 
 #include <linux/mmc/sdio_ids.h>
@@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
-	.cal_data	= "mrvl/sd8797_caldata.conf",
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8897_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_88xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		struct btmrvl_sdio_device *data = (void *) id->driver_data;
 		card->helper = data->helper;
 		card->firmware = data->firmware;
-		card->cal_data = data->cal_data;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
 	}
@@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 	}
 
 	card->priv = priv;
-	priv->btmrvl_dev.dev = &card->func->dev;
-	priv->btmrvl_dev.cal_data = card->cal_data;
 
 	/* Initialize the interface specific function pointers */
 	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");

drivers/bluetooth/btmrvl_sdio.h

@@ -85,7 +85,6 @@ struct btmrvl_sdio_card {
 	u32 ioport;
 	const char *helper;
 	const char *firmware;
-	const char *cal_data;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
@@ -95,7 +94,6 @@ struct btmrvl_sdio_card {
 struct btmrvl_sdio_device {
 	const char *helper;
 	const char *firmware;
-	const char *cal_data;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 };

drivers/bluetooth/btusb.c

@@ -150,6 +150,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -163,6 +164,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -223,6 +225,7 @@ static const struct usb_device_id blacklist_table[] = {
 
 	/* Intel Bluetooth device */
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
 
 	{ }	/* Terminating entry */
 };
@@ -1435,8 +1438,10 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
-	if (id->driver_info & BTUSB_INTEL)
+	if (id->driver_info & BTUSB_INTEL) {
+		usb_enable_autosuspend(data->udev);
 		hdev->setup = btusb_setup_intel;
+	}
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);

drivers/net/wireless/ath/ath10k/ce.c

@@ -243,6 +243,16 @@ static inline void ath10k_ce_error_intr_enable(struct ath10k *ar,
 			   misc_ie_addr | CE_ERROR_MASK);
 }
 
+static inline void ath10k_ce_error_intr_disable(struct ath10k *ar,
+						u32 ce_ctrl_addr)
+{
+	u32 misc_ie_addr = ath10k_pci_read32(ar,
+					     ce_ctrl_addr + MISC_IE_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + MISC_IE_ADDRESS,
+			   misc_ie_addr & ~CE_ERROR_MASK);
+}
+
 static inline void ath10k_ce_engine_int_status_clear(struct ath10k *ar,
 						     u32 ce_ctrl_addr,
 						     unsigned int mask)
@@ -731,7 +741,6 @@ void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id)
 
 void ath10k_ce_per_engine_service_any(struct ath10k *ar)
 {
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ce_id, ret;
 	u32 intr_summary;
 
@@ -741,7 +750,7 @@ void ath10k_ce_per_engine_service_any(struct ath10k *ar)
 
 	intr_summary = CE_INTERRUPT_SUMMARY(ar);
 
-	for (ce_id = 0; intr_summary && (ce_id < ar_pci->ce_count); ce_id++) {
+	for (ce_id = 0; intr_summary && (ce_id < CE_COUNT); ce_id++) {
 		if (intr_summary & (1 << ce_id))
 			intr_summary &= ~(1 << ce_id);
 		else
@@ -783,22 +792,25 @@ static void ath10k_ce_per_engine_handler_adjust(struct ath10k_ce_pipe *ce_state,
 	ath10k_pci_sleep(ar);
 }
 
-void ath10k_ce_disable_interrupts(struct ath10k *ar)
+int ath10k_ce_disable_interrupts(struct ath10k *ar)
 {
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ce_id, ret;
 
 	ret = ath10k_pci_wake(ar);
 	if (ret)
-		return;
+		return ret;
 
-	for (ce_id = 0; ce_id < ar_pci->ce_count; ce_id++) {
-		struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
-		u32 ctrl_addr = ce_state->ctrl_addr;
+	for (ce_id = 0; ce_id < CE_COUNT; ce_id++) {
+		u32 ctrl_addr = ath10k_ce_base_address(ce_id);
 
 		ath10k_ce_copy_complete_intr_disable(ar, ctrl_addr);
+		ath10k_ce_error_intr_disable(ar, ctrl_addr);
+		ath10k_ce_watermark_intr_disable(ar, ctrl_addr);
 	}
+
 	ath10k_pci_sleep(ar);
+
+	return 0;
 }
 
 void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state,
@@ -1047,9 +1059,19 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar,
 				const struct ce_attr *attr)
 {
 	struct ath10k_ce_pipe *ce_state;
-	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
 	int ret;
 
+	/*
+	 * Make sure there's enough CE ringbuffer entries for HTT TX to avoid
+	 * additional TX locking checks.
+	 *
+	 * For the lack of a better place do the check here.
+	 */
+	BUILD_BUG_ON(TARGET_NUM_MSDU_DESC >
+		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
+	BUILD_BUG_ON(TARGET_10X_NUM_MSDU_DESC >
+		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
+
 	ret = ath10k_pci_wake(ar);
 	if (ret)
 		return NULL;
@@ -1057,7 +1079,7 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar,
 	ce_state = ath10k_ce_init_state(ar, ce_id, attr);
 	if (!ce_state) {
 		ath10k_err("Failed to initialize CE state for ID: %d\n", ce_id);
-		return NULL;
+		goto out;
 	}
 
 	if (attr->src_nentries) {
@@ -1066,7 +1088,8 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar,
 			ath10k_err("Failed to initialize CE src ring for ID: %d (%d)\n",
 				   ce_id, ret);
 			ath10k_ce_deinit(ce_state);
-			return NULL;
+			ce_state = NULL;
+			goto out;
 		}
 	}
 
@@ -1076,15 +1099,13 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar,
 			ath10k_err("Failed to initialize CE dest ring for ID: %d (%d)\n",
 				   ce_id, ret);
 			ath10k_ce_deinit(ce_state);
-			return NULL;
+			ce_state = NULL;
+			goto out;
 		}
 	}
 
-	/* Enable CE error interrupts */
-	ath10k_ce_error_intr_enable(ar, ctrl_addr);
-
+out:
 	ath10k_pci_sleep(ar);
-
 	return ce_state;
 }
 

drivers/net/wireless/ath/ath10k/ce.h

@@ -234,7 +234,7 @@ void ath10k_ce_deinit(struct ath10k_ce_pipe *ce_state);
 /*==================CE Interrupt Handlers====================*/
 void ath10k_ce_per_engine_service_any(struct ath10k *ar);
 void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id);
-void ath10k_ce_disable_interrupts(struct ath10k *ar);
+int ath10k_ce_disable_interrupts(struct ath10k *ar);
 
 /* ce_attr.flags values */
 /* Use NonSnooping PCIe accesses? */

drivers/net/wireless/ath/ath10k/core.c

@@ -597,10 +597,8 @@ static int ath10k_init_uart(struct ath10k *ar)
 		return ret;
 	}
 
-	if (!uart_print) {
-		ath10k_info("UART prints disabled\n");
+	if (!uart_print)
 		return 0;
-	}
 
 	ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7);
 	if (ret) {
@@ -645,8 +643,8 @@ static int ath10k_init_hw_params(struct ath10k *ar)
 
 	ar->hw_params = *hw_params;
 
-	ath10k_info("Hardware name %s version 0x%x\n",
-		    ar->hw_params.name, ar->target_version);
+	ath10k_dbg(ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n",
+		   ar->hw_params.name, ar->target_version);
 
 	return 0;
 }
@@ -664,7 +662,8 @@ static void ath10k_core_restart(struct work_struct *work)
 		ieee80211_restart_hw(ar->hw);
 		break;
 	case ATH10K_STATE_OFF:
-		/* this can happen if driver is being unloaded */
+		/* this can happen if driver is being unloaded
+		 * or if the crash happens during FW probing */
 		ath10k_warn("cannot restart a device that hasn't been started\n");
 		break;
 	case ATH10K_STATE_RESTARTING:
@@ -737,8 +736,6 @@ EXPORT_SYMBOL(ath10k_core_create);
 
 void ath10k_core_destroy(struct ath10k *ar)
 {
-	ath10k_debug_destroy(ar);
-
 	flush_workqueue(ar->workqueue);
 	destroy_workqueue(ar->workqueue);
 
@@ -786,21 +783,30 @@ int ath10k_core_start(struct ath10k *ar)
 		goto err;
 	}
 
-	status = ath10k_htc_wait_target(&ar->htc);
-	if (status)
+	status = ath10k_hif_start(ar);
+	if (status) {
+		ath10k_err("could not start HIF: %d\n", status);
 		goto err_wmi_detach;
+	}
+
+	status = ath10k_htc_wait_target(&ar->htc);
+	if (status) {
+		ath10k_err("failed to connect to HTC: %d\n", status);
+		goto err_hif_stop;
+	}
 
 	status = ath10k_htt_attach(ar);
 	if (status) {
 		ath10k_err("could not attach htt (%d)\n", status);
-		goto err_wmi_detach;
+		goto err_hif_stop;
 	}
 
 	status = ath10k_init_connect_htc(ar);
 	if (status)
 		goto err_htt_detach;
 
-	ath10k_info("firmware %s booted\n", ar->hw->wiphy->fw_version);
+	ath10k_dbg(ATH10K_DBG_BOOT, "firmware %s booted\n",
+		   ar->hw->wiphy->fw_version);
 
 	status = ath10k_wmi_cmd_init(ar);
 	if (status) {
@@ -826,12 +832,23 @@ int ath10k_core_start(struct ath10k *ar)
 	ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
 	INIT_LIST_HEAD(&ar->arvifs);
 
+	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
+		ath10k_info("%s (0x%x) fw %s api %d htt %d.%d\n",
+			    ar->hw_params.name, ar->target_version,
+			    ar->hw->wiphy->fw_version, ar->fw_api,
+			    ar->htt.target_version_major,
+			    ar->htt.target_version_minor);
+
+	__set_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags);
+
 	return 0;
 
 err_disconnect_htc:
 	ath10k_htc_stop(&ar->htc);
 err_htt_detach:
 	ath10k_htt_detach(&ar->htt);
+err_hif_stop:
+	ath10k_hif_stop(ar);
 err_wmi_detach:
 	ath10k_wmi_detach(ar);
 err:
@@ -985,6 +1002,8 @@ void ath10k_core_unregister(struct ath10k *ar)
 	ath10k_mac_unregister(ar);
 
 	ath10k_core_free_firmware_files(ar);
+
+	ath10k_debug_destroy(ar);
 }
 EXPORT_SYMBOL(ath10k_core_unregister);
 

drivers/net/wireless/ath/ath10k/core.h

@@ -30,6 +30,7 @@
 #include "wmi.h"
 #include "../ath.h"
 #include "../regd.h"
+#include "../dfs_pattern_detector.h"
 
 #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
@@ -43,7 +44,7 @@
 /* Antenna noise floor */
 #define ATH10K_DEFAULT_NOISE_FLOOR -95
 
-#define ATH10K_MAX_NUM_MGMT_PENDING 16
+#define ATH10K_MAX_NUM_MGMT_PENDING 128
 
 struct ath10k;
 
@@ -192,6 +193,14 @@ struct ath10k_target_stats {
 
 };
 
+struct ath10k_dfs_stats {
+	u32 phy_errors;
+	u32 pulses_total;
+	u32 pulses_detected;
+	u32 pulses_discarded;
+	u32 radar_detected;
+};
+
 #define ATH10K_MAX_NUM_PEER_IDS (1 << 11) /* htt rx_desc limit */
 
 struct ath10k_peer {
@@ -261,6 +270,8 @@ struct ath10k_debug {
 
 	unsigned long htt_stats_mask;
 	struct delayed_work htt_stats_dwork;
+	struct ath10k_dfs_stats dfs_stats;
+	struct ath_dfs_pool_stats dfs_pool_stats;
 };
 
 enum ath10k_state {
@@ -299,6 +310,12 @@ enum ath10k_fw_features {
 	ATH10K_FW_FEATURE_COUNT,
 };
 
+enum ath10k_dev_flags {
+	/* Indicates that ath10k device is during CAC phase of DFS */
+	ATH10K_CAC_RUNNING,
+	ATH10K_FLAG_FIRST_BOOT_DONE,
+};
+
 struct ath10k {
 	struct ath_common ath_common;
 	struct ieee80211_hw *hw;
@@ -392,6 +409,8 @@ struct ath10k {
 	bool monitor_enabled;
 	bool monitor_present;
 	unsigned int filter_flags;
+	unsigned long dev_flags;
+	u32 dfs_block_radar_events;
 
 	struct wmi_pdev_set_wmm_params_arg wmm_params;
 	struct completion install_key_done;
@@ -428,6 +447,8 @@ struct ath10k {
 	u32 survey_last_cycle_count;
 	struct survey_info survey[ATH10K_NUM_CHANS];
 
+	struct dfs_pattern_detector *dfs_detector;
+
 #ifdef CONFIG_ATH10K_DEBUGFS
 	struct ath10k_debug debug;
 #endif

drivers/net/wireless/ath/ath10k/debug.c

@@ -639,6 +639,86 @@ void ath10k_debug_stop(struct ath10k *ar)
 		cancel_delayed_work(&ar->debug.htt_stats_dwork);
 }
 
+static ssize_t ath10k_write_simulate_radar(struct file *file,
+					   const char __user *user_buf,
+					   size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+
+	ieee80211_radar_detected(ar->hw);
+
+	return count;
+}
+
+static const struct file_operations fops_simulate_radar = {
+	.write = ath10k_write_simulate_radar,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+#define ATH10K_DFS_STAT(s, p) (\
+	len += scnprintf(buf + len, size - len, "%-28s : %10u\n", s, \
+			 ar->debug.dfs_stats.p))
+
+#define ATH10K_DFS_POOL_STAT(s, p) (\
+	len += scnprintf(buf + len, size - len, "%-28s : %10u\n", s, \
+			 ar->debug.dfs_pool_stats.p))
+
+static ssize_t ath10k_read_dfs_stats(struct file *file, char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	int retval = 0, len = 0;
+	const int size = 8000;
+	struct ath10k *ar = file->private_data;
+	char *buf;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	if (!ar->dfs_detector) {
+		len += scnprintf(buf + len, size - len, "DFS not enabled\n");
+		goto exit;
+	}
+
+	ar->debug.dfs_pool_stats =
+			ar->dfs_detector->get_stats(ar->dfs_detector);
+
+	len += scnprintf(buf + len, size - len, "Pulse detector statistics:\n");
+
+	ATH10K_DFS_STAT("reported phy errors", phy_errors);
+	ATH10K_DFS_STAT("pulse events reported", pulses_total);
+	ATH10K_DFS_STAT("DFS pulses detected", pulses_detected);
+	ATH10K_DFS_STAT("DFS pulses discarded", pulses_discarded);
+	ATH10K_DFS_STAT("Radars detected", radar_detected);
+
+	len += scnprintf(buf + len, size - len, "Global Pool statistics:\n");
+	ATH10K_DFS_POOL_STAT("Pool references", pool_reference);
+	ATH10K_DFS_POOL_STAT("Pulses allocated", pulse_allocated);
+	ATH10K_DFS_POOL_STAT("Pulses alloc error", pulse_alloc_error);
+	ATH10K_DFS_POOL_STAT("Pulses in use", pulse_used);
+	ATH10K_DFS_POOL_STAT("Seqs. allocated", pseq_allocated);
+	ATH10K_DFS_POOL_STAT("Seqs. alloc error", pseq_alloc_error);
+	ATH10K_DFS_POOL_STAT("Seqs. in use", pseq_used);
+
+exit:
+	if (len > size)
+		len = size;
+
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+
+	return retval;
+}
+
+static const struct file_operations fops_dfs_stats = {
+	.read = ath10k_read_dfs_stats,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 int ath10k_debug_create(struct ath10k *ar)
 {
 	ar->debug.debugfs_phy = debugfs_create_dir("ath10k",
@@ -667,6 +747,20 @@ int ath10k_debug_create(struct ath10k *ar)
 	debugfs_create_file("htt_stats_mask", S_IRUSR, ar->debug.debugfs_phy,
 			    ar, &fops_htt_stats_mask);
 
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
+		debugfs_create_file("dfs_simulate_radar", S_IWUSR,
+				    ar->debug.debugfs_phy, ar,
+				    &fops_simulate_radar);
+
+		debugfs_create_bool("dfs_block_radar_events", S_IWUSR,
+				    ar->debug.debugfs_phy,
+				    &ar->dfs_block_radar_events);
+
+		debugfs_create_file("dfs_stats", S_IRUSR,
+				    ar->debug.debugfs_phy, ar,
+				    &fops_dfs_stats);
+	}
+
 	return 0;
 }
 

drivers/net/wireless/ath/ath10k/debug.h

@@ -33,6 +33,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_MGMT		= 0x00000100,
 	ATH10K_DBG_DATA		= 0x00000200,
 	ATH10K_DBG_BMI		= 0x00000400,
+	ATH10K_DBG_REGULATORY	= 0x00000800,
 	ATH10K_DBG_ANY		= 0xffffffff,
 };
 
@@ -53,6 +54,8 @@ void ath10k_debug_read_service_map(struct ath10k *ar,
 void ath10k_debug_read_target_stats(struct ath10k *ar,
 				    struct wmi_stats_event *ev);
 
+#define ATH10K_DFS_STAT_INC(ar, c) (ar->debug.dfs_stats.c++)
+
 #else
 static inline int ath10k_debug_start(struct ath10k *ar)
 {
@@ -82,6 +85,9 @@ static inline void ath10k_debug_read_target_stats(struct ath10k *ar,
 						  struct wmi_stats_event *ev)
 {
 }
+
+#define ATH10K_DFS_STAT_INC(ar, c) do { } while (0)
+
 #endif /* CONFIG_ATH10K_DEBUGFS */
 
 #ifdef CONFIG_ATH10K_DEBUG

drivers/net/wireless/ath/ath10k/htc.c

@@ -191,6 +191,11 @@ static int ath10k_htc_tx_completion_handler(struct ath10k *ar,
 	struct ath10k_htc *htc = &ar->htc;
 	struct ath10k_htc_ep *ep = &htc->endpoint[eid];
 
+	if (!skb) {
+		ath10k_warn("invalid sk_buff completion - NULL pointer. firmware crashed?\n");
+		return 0;
+	}
+
 	ath10k_htc_notify_tx_completion(ep, skb);
 	/* the skb now belongs to the completion handler */
 
@@ -534,14 +539,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	u16 credit_count;
 	u16 credit_size;
 
-	reinit_completion(&htc->ctl_resp);
-
-	status = ath10k_hif_start(htc->ar);
-	if (status) {
-		ath10k_err("could not start HIF (%d)\n", status);
-		goto err_start;
-	}
-
 	status = wait_for_completion_timeout(&htc->ctl_resp,
 					     ATH10K_HTC_WAIT_TIMEOUT_HZ);
 	if (status <= 0) {
@@ -549,15 +546,13 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 			status = -ETIMEDOUT;
 
 		ath10k_err("ctl_resp never came in (%d)\n", status);
-		goto err_target;
+		return status;
 	}
 
 	if (htc->control_resp_len < sizeof(msg->hdr) + sizeof(msg->ready)) {
 		ath10k_err("Invalid HTC ready msg len:%d\n",
 			   htc->control_resp_len);
-
-		status = -ECOMM;
-		goto err_target;
+		return -ECOMM;
 	}
 
 	msg = (struct ath10k_htc_msg *)htc->control_resp_buffer;
@@ -567,8 +562,7 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 
 	if (message_id != ATH10K_HTC_MSG_READY_ID) {
 		ath10k_err("Invalid HTC ready msg: 0x%x\n", message_id);
-		status = -ECOMM;
-		goto err_target;
+		return -ECOMM;
 	}
 
 	htc->total_transmit_credits = credit_count;
@@ -581,9 +575,8 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 
 	if ((htc->total_transmit_credits == 0) ||
 	    (htc->target_credit_size == 0)) {
-		status = -ECOMM;
 		ath10k_err("Invalid credit size received\n");
-		goto err_target;
+		return -ECOMM;
 	}
 
 	ath10k_htc_setup_target_buffer_assignments(htc);
@@ -600,14 +593,10 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	status = ath10k_htc_connect_service(htc, &conn_req, &conn_resp);
 	if (status) {
 		ath10k_err("could not connect to htc service (%d)\n", status);
-		goto err_target;
+		return status;
 	}
 
 	return 0;
-err_target:
-	ath10k_hif_stop(htc->ar);
-err_start:
-	return status;
 }
 
 int ath10k_htc_connect_service(struct ath10k_htc *htc,

drivers/net/wireless/ath/ath10k/htt.c

@@ -104,8 +104,8 @@ err_htc_attach:
 
 static int ath10k_htt_verify_version(struct ath10k_htt *htt)
 {
-	ath10k_info("htt target version %d.%d\n",
-		    htt->target_version_major, htt->target_version_minor);
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt target version %d.%d\n",
+		   htt->target_version_major, htt->target_version_minor);
 
 	if (htt->target_version_major != 2 &&
 	    htt->target_version_major != 3) {

drivers/net/wireless/ath/ath10k/htt.h

@@ -1182,6 +1182,7 @@ struct htt_rx_info {
 		u32 info2;
 	} rate;
 	bool fcs_err;
+	bool amsdu_more;
 };
 
 struct ath10k_htt {

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -659,23 +659,6 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt,
 	memcpy(hdr_buf, hdr, hdr_len);
 	hdr = (struct ieee80211_hdr *)hdr_buf;
 
-	/* FIXME: Hopefully this is a temporary measure.
-	 *
-	 * Reporting individual A-MSDU subframes means each reported frame
-	 * shares the same sequence number.
-	 *
-	 * mac80211 drops frames it recognizes as duplicates, i.e.
-	 * retransmission flag is set and sequence number matches sequence
-	 * number from a previous frame (as per IEEE 802.11-2012: 9.3.2.10
-	 * "Duplicate detection and recovery")
-	 *
-	 * To avoid frames being dropped clear retransmission flag for all
-	 * received A-MSDUs.
-	 *
-	 * Worst case: actual duplicate frames will be reported but this should
-	 * still be handled gracefully by other OSI/ISO layers. */
-	hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_RETRY);
-
 	first = skb;
 	while (skb) {
 		void *decap_hdr;
@@ -746,6 +729,9 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt,
 		skb = skb->next;
 		info->skb->next = NULL;
 
+		if (skb)
+			info->amsdu_more = true;
+
 		ath10k_process_rx(htt->ar, info);
 	}
 
@@ -959,6 +945,11 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 				continue;
 			}
 
+			if (test_bit(ATH10K_CAC_RUNNING, &htt->ar->dev_flags)) {
+				ath10k_htt_rx_free_msdu_chain(msdu_head);
+				continue;
+			}
+
 			/* FIXME: we do not support chaining yet.
 			 * this needs investigation */
 			if (msdu_chaining) {

drivers/net/wireless/ath/ath10k/htt_tx.c

@@ -85,16 +85,13 @@ void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id)
 
 int ath10k_htt_tx_attach(struct ath10k_htt *htt)
 {
-	u8 pipe;
-
 	spin_lock_init(&htt->tx_lock);
 	init_waitqueue_head(&htt->empty_tx_wq);
 
-	/* At the beginning free queue number should hint us the maximum
-	 * queue length */
-	pipe = htt->ar->htc.endpoint[htt->eid].ul_pipe_id;
-	htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar,
-								   pipe);
+	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, htt->ar->fw_features))
+		htt->max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
+	else
+		htt->max_num_pending_tx = TARGET_NUM_MSDU_DESC;
 
 	ath10k_dbg(ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
 		   htt->max_num_pending_tx);

drivers/net/wireless/ath/ath10k/hw.h

@@ -269,6 +269,7 @@ enum ath10k_mcast2ucast_mode {
 #define CORE_CTRL_CPU_INTR_MASK			0x00002000
 #define CORE_CTRL_ADDRESS			0x0000
 #define PCIE_INTR_ENABLE_ADDRESS		0x0008
+#define PCIE_INTR_CAUSE_ADDRESS			0x000c
 #define PCIE_INTR_CLR_ADDRESS			0x0014
 #define SCRATCH_3_ADDRESS			0x0030