Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
2026-05-01 15:00:59 -07:00 · 2017-07-08 15:51:57 -07:00
parent 026d15f6b9 6aed468480
commit f263fbb8d6
90 changed files with 3789 additions and 825 deletions
@@ -30,6 +30,13 @@ Mandatory properties:
  128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
  pre-fetchable.

+Optional properties:
+- clocks: when present, this should contain the peripheral clock (PCLK) and the
+  PCI clock (PCICLK). If these are not present, they are assumed to be
+  hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+- clock-names: when present, this should contain "PCLK" for the peripheral
+  clock and "PCICLK" for the PCI-side clock.
+
 Mandatory subnodes:
 - For "faraday,ftpci100" a node representing the interrupt-controller inside the
  host bridge is mandatory. It has the following mandatory properties:
@@ -33,6 +33,10 @@ Optional properties:
 - reset-gpio-active-high: If present then the reset sequence using the GPIO
  specified in the "reset-gpio" property is reversed (H=reset state,
  L=operation state).
+- vpcie-supply: Should specify the regulator in charge of PCIe port power.
+  The regulator will be enabled when initializing the PCIe host and
+  disabled either as part of the init process or when shutting down the
+  host.

 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
@@ -0,0 +1,130 @@
+MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs
+
+PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root
+ports supports a Gen2 1-lane Link and has PIPE interface to PHY.
+
+Required properties:
+- compatible: Should contain "mediatek,mt7623-pcie".
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the PCIe controller.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - free_ck :for reference clock of PCIe subsys
+  - sys_ck0 :for clock of Port0
+  - sys_ck1 :for clock of Port1
+  - sys_ck2 :for clock of Port2
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pcie-rst0 :port0 reset
+  - pcie-rst1 :port1 reset
+  - pcie-rst2 :port2 reset
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+  number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+  which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+  and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+- num-lanes: Number of lanes to use for this port.
+
+Examples:
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie-controller@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+
+		pcie@0,0 {
+			device_type = "pci";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+
+		pcie@1,0 {
+			device_type = "pci";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+
+		pcie@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+	};
@@ -8,6 +8,7 @@
 			- "qcom,pcie-apq8064" for apq8064
 			- "qcom,pcie-apq8084" for apq8084
 			- "qcom,pcie-msm8996" for msm8996 or apq8096
+			- "qcom,pcie-ipq4019" for ipq4019

 - reg:
 	Usage: required
@@ -87,7 +88,7 @@
 			- "core"	Clocks the pcie hw block
 			- "phy"		Clocks the pcie PHY block
 - clock-names:
-	Usage: required for apq8084
+	Usage: required for apq8084/ipq4019
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "aux"		Auxiliary (AUX) clock
@@ -126,6 +127,23 @@
 	Definition: Should contain the following entries
 			- "core" Core reset

+- reset-names:
+	Usage: required for ipq/apq8064
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "axi_m"		AXI master reset
+			- "axi_s"		AXI slave reset
+			- "pipe"		PIPE reset
+			- "axi_m_vmid"		VMID reset
+			- "axi_s_xpu"		XPU reset
+			- "parf"		PARF reset
+			- "phy"			PHY reset
+			- "axi_m_sticky"	AXI sticky reset
+			- "pipe_sticky"		PIPE sticky reset
+			- "pwr"			PWR reset
+			- "ahb"			AHB reset
+			- "phy_ahb"		PHY AHB reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>
@@ -1,4 +1,4 @@
-* Renesas RCar PCIe interface
+* Renesas R-Car PCIe interface

 Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
@@ -0,0 +1,29 @@
+Sigma Designs Tango PCIe controller
+
+Required properties:
+
+- compatible: "sigma,smp8759-pcie"
+- reg: address/size of PCI configuration space, address/size of register area
+- bus-range: defined by size of PCI configuration space
+- device_type: "pci"
+- #size-cells: <2>
+- #address-cells: <3>
+- msi-controller
+- ranges: translation from system to bus addresses
+- interrupts: spec for misc interrupts, spec for MSI
+
+Example:
+
+	pcie@2e000 {
+		compatible = "sigma,smp8759-pcie";
+		reg = <0x50000000 0x400000>, <0x2e000 0x100>;
+		bus-range = <0 3>;
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		msi-controller;
+		ranges = <0x02000000 0x0 0x00400000  0x50400000  0x0 0x3c00000>;
+		interrupts =
+			<54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */
+			<55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */
+	};
@@ -348,6 +348,7 @@ PER-CPU MEM
  devm_free_percpu()

 PCI
+  devm_pci_alloc_host_bridge()  : managed PCI host bridge allocation
  devm_pci_remap_cfgspace()	: ioremap PCI configuration space
  devm_pci_remap_cfg_resource()	: ioremap PCI configuration space resource
  pcim_enable_device()		: after success, all PCI ops become managed
@@ -10160,9 +10160,16 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
 F:	drivers/pci/dwc/pcie-hisi.c

+PCIE DRIVER FOR HISILICON KIRIN
+M:	Xiaowei Song <songxiaowei@hisilicon.com>
+M:	Binghui Wang <wangbinghui@hisilicon.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/pcie-kirin.txt
+F:	drivers/pci/dwc/pcie-kirin.c
+
 PCIE DRIVER FOR ROCKCHIP
 M:	Shawn Lin <shawn.lin@rock-chips.com>
-M:	Wenrui Li <wenrui.li@rock-chips.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-rockchip@lists.infradead.org
 S:	Maintained
@@ -10184,6 +10191,14 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/pci-thunder-*
 F:	drivers/pci/host/pci-thunder-*

+PCIE DRIVER FOR MEDIATEK
+M:      Ryder Lee <ryder.lee@mediatek.com>
+L:      linux-pci@vger.kernel.org
+L:      linux-mediatek@lists.infradead.org
+S:      Supported
+F:      Documentation/devicetree/bindings/pci/mediatek*
+F:      drivers/pci/host/*mediatek*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org
@@ -16,6 +16,7 @@
 struct pci_sys_data;
 struct pci_ops;
 struct pci_bus;
+struct pci_host_bridge;
 struct device;

 struct hw_pci {
@@ -25,7 +26,7 @@ struct hw_pci {
 	unsigned int	io_optional:1;
 	void		**private_data;
 	int		(*setup)(int nr, struct pci_sys_data *);
-	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+	int		(*scan)(int nr, struct pci_host_bridge *);
 	void		(*preinit)(void);
 	void		(*postinit)(void);
 	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
@@ -458,10 +458,14 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 	int nr, busnr;

 	for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
-		sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
-		if (WARN(!sys, "PCI: unable to allocate sys data!"))
+		struct pci_host_bridge *bridge;
+
+		bridge = pci_alloc_host_bridge(sizeof(struct pci_sys_data));
+		if (WARN(!bridge, "PCI: unable to allocate bridge!"))
 			break;

+		sys = pci_host_bridge_priv(bridge);
+
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
@@ -473,7 +477,6 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		ret = hw->setup(nr, sys);

 		if (ret > 0) {
-			struct pci_host_bridge *host_bridge;

 			ret = pcibios_init_resource(nr, sys, hw->io_optional);
 			if (ret)  {
@@ -481,26 +484,37 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 				break;
 			}

-			if (hw->scan)
-				sys->bus = hw->scan(nr, sys);
-			else
-				sys->bus = pci_scan_root_bus_msi(parent,
-					sys->busnr, hw->ops, sys,
-					&sys->resources, hw->msi_ctrl);
+			bridge->map_irq = pcibios_map_irq;
+			bridge->swizzle_irq = pcibios_swizzle;

-			if (WARN(!sys->bus, "PCI: unable to scan bus!")) {
-				kfree(sys);
+			if (hw->scan)
+				ret = hw->scan(nr, bridge);
+			else {
+				list_splice_init(&sys->resources,
+						 &bridge->windows);
+				bridge->dev.parent = parent;
+				bridge->sysdata = sys;
+				bridge->busnr = sys->busnr;
+				bridge->ops = hw->ops;
+				bridge->msi = hw->msi_ctrl;
+				bridge->align_resource =
+						hw->align_resource;
+
+				ret = pci_scan_root_bus_bridge(bridge);
+			}
+
+			if (WARN(ret < 0, "PCI: unable to scan bus!")) {
+				pci_free_host_bridge(bridge);
 				break;
 			}

+			sys->bus = bridge->bus;
+
 			busnr = sys->bus->busn_res.end + 1;

 			list_add(&sys->node, head);
-
-			host_bridge = pci_find_host_bridge(sys->bus);
-			host_bridge->align_resource = hw->align_resource;
 		} else {
-			kfree(sys);
+			pci_free_host_bridge(bridge);
 			if (ret < 0)
 				break;
 		}
@@ -519,8 +533,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
 	if (hw->postinit)
 		hw->postinit();

-	pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
-
 	list_for_each_entry(sys, &head, node) {
 		struct pci_bus *bus = sys->bus;

@@ -152,16 +152,23 @@ static void rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);

-static struct pci_bus __init *
-dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+static int __init
+dove_pcie_scan_bus(int nr, struct pci_host_bridge *bridge)
 {
+	struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
+
 	if (nr >= num_pcie_ports) {
 		BUG();
-		return NULL;
+		return -EINVAL;
 	}

-	return pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-				 &sys->resources);
+	list_splice_init(&sys->resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = sys;
+	bridge->busnr = sys->busnr;
+	bridge->ops = &pcie_ops;
+
+	return pci_scan_root_bus_bridge(bridge);
 }

 static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
@@ -504,10 +504,10 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)

 /* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
 */
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge)
 {
-	int which_atu;
-	struct pci_bus *bus = NULL;
+	int which_atu, ret;
+	struct pci_sys_data *sys = pci_host_bridge_priv(bridge);

 	switch (init_atu) {
 	case IOP13XX_INIT_ATU_ATUX:
@@ -525,9 +525,14 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)

 	if (!which_atu) {
 		BUG();
-		return NULL;
+		return -ENODEV;
 	}

+	list_splice_init(&sys->resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = sys;
+	bridge->busnr = sys->busnr;
+
 	switch (which_atu) {
 	case IOP13XX_INIT_ATU_ATUX:
 		if (time_after_eq(jiffies + msecs_to_jiffies(1000),
@@ -535,18 +540,22 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
 			while(time_before(jiffies, atux_trhfa_timeout))
 				udelay(100);

-		bus = pci_bus_atux = pci_scan_root_bus(NULL, sys->busnr,
-						       &iop13xx_atux_ops,
-						       sys, &sys->resources);
+		bridge->ops = &iop13xx_atux_ops;
+		ret = pci_scan_root_bus_bridge(bridge);
+		if (!ret)
+			pci_bus_atux = bridge->bus;
 		break;
 	case IOP13XX_INIT_ATU_ATUE:
-		bus = pci_bus_atue = pci_scan_root_bus(NULL, sys->busnr,
-						       &iop13xx_atue_ops,
-						       sys, &sys->resources);
+		bridge->ops = &iop13xx_atue_ops;
+		ret = pci_scan_root_bus_bridge(bridge);
+		if (!ret)
+			pci_bus_atue = bridge->bus;
 		break;
+	default:
+		ret = -EINVAL;
 	}

-	return bus;
+	return ret;
 }

 /* This function is called from iop13xx_pci_init() after assigning valid
@@ -11,9 +11,10 @@ extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;

 struct pci_sys_data;
+struct pci_host_bridge;
 struct hw_pci;
 int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
@@ -194,16 +194,22 @@ static void rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);

-static struct pci_bus __init *
-mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+static int __init mv78xx0_pcie_scan_bus(int nr, struct pci_host_bridge *bridge)
 {
+	struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
+
 	if (nr >= num_pcie_ports) {
 		BUG();
-		return NULL;
+		return -EINVAL;
 	}

-	return pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-				 &sys->resources);
+	list_splice_init(&sys->resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = sys;
+	bridge->busnr = sys->busnr;
+	bridge->ops = &pcie_ops;
+
+	return pci_scan_root_bus_bridge(bridge);
 }

 static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
@@ -54,6 +54,7 @@ void orion5x_restart(enum reboot_mode, const char *);
 * PCIe/PCI functions.
 */
 struct pci_bus;
+struct pci_host_bridge;
 struct pci_sys_data;
 struct pci_dev;

@@ -61,7 +62,7 @@ void orion5x_pcie_id(u32 *dev, u32 *rev);
 void orion5x_pci_disable(void);
 void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+int orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge);
 int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);

 struct tag;
@@ -555,18 +555,27 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 	return 0;
 }

-struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
+int __init orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge)
 {
-	if (nr == 0)
-		return pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					 &sys->resources);
+	struct pci_sys_data *sys = pci_host_bridge_priv(bridge);

-	if (nr == 1 && !orion5x_pci_disabled)
-		return pci_scan_root_bus(NULL, sys->busnr, &pci_ops, sys,
-					 &sys->resources);
+	list_splice_init(&sys->resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = sys;
+	bridge->busnr = sys->busnr;
+
+	if (nr == 0) {
+		bridge->ops = &pcie_ops;
+		return pci_scan_root_bus_bridge(bridge);
+	}
+
+	if (nr == 1 && !orion5x_pci_disabled) {
+		bridge->ops = &pci_ops;
+		return pci_scan_root_bus_bridge(bridge);
+	}

 	BUG();
-	return NULL;
+	return -ENODEV;
 }

 int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
@@ -39,20 +39,18 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 	return res->start;
 }

+#ifdef CONFIG_ACPI
 /*
 * Try to assign the IRQ number when probing a new device
 */
 int pcibios_alloc_irq(struct pci_dev *dev)
 {
-	if (acpi_disabled)
-		dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
-#ifdef CONFIG_ACPI
-	else
-		return acpi_pci_irq_enable(dev);
-#endif
+	if (!acpi_disabled)
+		acpi_pci_irq_enable(dev);

 	return 0;
 }
+#endif

 /*
 * raw_pci_read/write - Platform-specific PCI config space access.
@@ -80,7 +80,6 @@ extern u32 cs5536_pci_conf_read4(int function, int reg);
 #define PCI_BAR3_REG			0x1c
 #define PCI_BAR4_REG			0x20
 #define PCI_BAR5_REG			0x24
-#define PCI_BAR_COUNT			6
 #define PCI_BAR_RANGE_MASK		0xFFFFFFFF

 /* CARDBUS CIS POINTER */
@@ -39,7 +39,6 @@ struct pci_controller {
 	unsigned long io_offset;
 	unsigned long io_map_base;
 	struct resource *busn_resource;
-	unsigned long busn_offset;

 #ifndef CONFIG_PCI_DOMAINS_GENERIC
 	unsigned int index;
@@ -86,8 +86,7 @@ static void pcibios_scanbus(struct pci_controller *hose)
 				hose->mem_resource, hose->mem_offset);
 	pci_add_resource_offset(&resources,
 				hose->io_resource, hose->io_offset);
-	pci_add_resource_offset(&resources,
-				hose->busn_resource, hose->busn_offset);
+	pci_add_resource(&resources, hose->busn_resource);
 	bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
 				&resources);
 	hose->bus = bus;
--- a/Show More
+++ b/Show More