Merge remote-tracking branch 'linus/master' into testing

.gitignore

@@ -29,6 +29,7 @@ modules.builtin
 *.bz2
 *.lzma
 *.xz
+*.lz4
 *.lzo
 *.patch
 *.gcno

Documentation/00-INDEX

@@ -187,6 +187,8 @@ firmware_class/
 	- request_firmware() hotplug interface info.
 flexible-arrays.txt
 	- how to make use of flexible sized arrays in linux
+fmc/
+	- information about the FMC bus abstraction
 frv/
 	- Fujitsu FR-V Linux documentation.
 futex-requeue-pi.txt

Documentation/ABI/stable/sysfs-driver-ib_srp

@@ -54,6 +54,13 @@ Description:	Interface for making ib_srp connect to a new target.
 		  ib_srp. Specifying a value that exceeds cmd_sg_entries is
 		  only safe with partial memory descriptor list support enabled
 		  (allow_ext_sg=1).
+		* comp_vector, a number in the range 0..n-1 specifying the
+		  MSI-X completion vector. Some HCA's allocate multiple (n)
+		  MSI-X vectors per HCA port. If the IRQ affinity masks of
+		  these interrupts have been configured such that each MSI-X
+		  interrupt is handled by a different CPU then the comp_vector
+		  parameter can be used to spread the SRP completion workload
+		  over multiple CPU's.
 
 What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
 Date:		January 2, 2006

Documentation/ABI/stable/sysfs-module

@@ -4,9 +4,13 @@ Description:
 
 	/sys/module/MODULENAME
 		The name of the module that is in the kernel.  This
-		module name will show up either if the module is built
-		directly into the kernel, or if it is loaded as a
-		dynamic module.
+		module name will always show up if the module is loaded as a
+		dynamic module.  If it is built directly into the kernel, it
+		will only show up if it has a version or at least one
+		parameter.
+
+		Note: The conditions of creation in the built-in case are not
+		by design and may be removed in the future.
 
 	/sys/module/MODULENAME/parameters
 		This directory contains individual files that are each

Documentation/ABI/testing/configfs-usb-gadget

@@ -0,0 +1,81 @@
+What:		/config/usb-gadget
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains sub-groups corresponding to created
+		USB gadgets.
+
+What:		/config/usb-gadget/gadget
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		The attributes of a gadget:
+
+		UDC		- bind a gadget to UDC/unbind a gadget;
+				write UDC's name found in /sys/class/udc/*
+				to bind a gadget, empty string "" to unbind.
+
+		bDeviceClass	- USB device class code
+		bDeviceSubClass	- USB device subclass code
+		bDeviceProtocol	- USB device protocol code
+		bMaxPacketSize0	- maximum endpoint 0 packet size
+		bcdDevice	- bcd device release number
+		bcdUSB		- bcd USB specification version number
+		idProduct	- product ID
+		idVendor	- vendor ID
+
+What:		/config/usb-gadget/gadget/configs
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains a USB gadget's configurations
+
+What:		/config/usb-gadget/gadget/configs/config
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes of a configuration:
+
+		bmAttributes	- configuration characteristics
+		MaxPower	- maximum power consumption from the bus
+
+What:		/config/usb-gadget/gadget/configs/config/strings
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains subdirectories for language-specific
+		strings for this configuration.
+
+What:		/config/usb-gadget/gadget/configs/config/strings/language
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		configuration	- configuration description
+
+
+What:		/config/usb-gadget/gadget/functions
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains functions available to this USB gadget.
+
+What:		/config/usb-gadget/gadget/strings
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains subdirectories for language-specific
+		strings for this gadget.
+
+What:		/config/usb-gadget/gadget/strings/language
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		serialnumber	- gadget's serial number (string)
+		product		- gadget's product description
+		manufacturer	- gadget's manufacturer description
+

Documentation/ABI/testing/configfs-usb-gadget-acm

@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/acm.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with acm function's instance "name".

Documentation/ABI/testing/configfs-usb-gadget-ecm

@@ -0,0 +1,16 @@
+What:		/config/usb-gadget/gadget/functions/ecm.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+
+

Documentation/ABI/testing/configfs-usb-gadget-eem

@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/eem.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link

Documentation/ABI/testing/configfs-usb-gadget-ncm

@@ -0,0 +1,15 @@
+What:		/config/usb-gadget/gadget/functions/ncm.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+

Documentation/ABI/testing/configfs-usb-gadget-obex

@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/obex.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with obex function's instance "name".
+

Documentation/ABI/testing/configfs-usb-gadget-phonet

@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/phonet.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: ifname.
+		It contains the network interface name assigned during
+		network device registration.

Documentation/ABI/testing/configfs-usb-gadget-rndis

@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/rndis.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link

Documentation/ABI/testing/configfs-usb-gadget-serial

@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/gser.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with gser function's instance "name".
+

Documentation/ABI/testing/configfs-usb-gadget-subset

@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/geth.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link

Documentation/ABI/testing/sysfs-bus-acpi

@@ -0,0 +1,58 @@
+What:		/sys/bus/acpi/devices/.../path
+Date:		December 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the full path of ACPI namespace
+		object associated with the device object.  For example,
+		\_SB_.PCI0.
+		This file is not present for device objects representing
+		fixed ACPI hardware features (like power and sleep
+		buttons).
+
+What:		/sys/bus/acpi/devices/.../modalias
+Date:		July 2007
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the PNP IDs of the device object.
+		That is acpi:HHHHHHHH:[CCCCCCC:].  Where each HHHHHHHH or
+		CCCCCCCC contains device object's PNPID (_HID or _CID).
+
+What:		/sys/bus/acpi/devices/.../hid
+Date:		April 2005
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the hardware ID (_HID) of the
+		device object.  For example, PNP0103.
+		This file is present for device objects having the _HID
+		control method.
+
+What:		/sys/bus/acpi/devices/.../description
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_STR control method, if present.
+
+What:		/sys/bus/acpi/devices/.../adr
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_ADR control method, which is present for ACPI device
+		objects representing devices having standard enumeration
+		algorithms, such as PCI.
+
+What:		/sys/bus/acpi/devices/.../uid
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_UID control method, if present.
+
+What:		/sys/bus/acpi/devices/.../eject
+Date:		December 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		Writing 1 to this attribute will trigger hot removal of
+		this device object.  This file exists for every device
+		object that has _EJ0 method.

Documentation/ABI/testing/sysfs-bus-event_source-devices-events

@@ -27,14 +27,36 @@ Description:	Generic performance monitoring events
 		"basename".
 
 
-What: 		/sys/devices/cpu/events/PM_LD_MISS_L1
-		/sys/devices/cpu/events/PM_LD_REF_L1
-		/sys/devices/cpu/events/PM_CYC
+What: 		/sys/devices/cpu/events/PM_1PLUS_PPC_CMPL
 		/sys/devices/cpu/events/PM_BRU_FIN
-		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
-		/sys/devices/cpu/events/PM_BRU_MPRED
-		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_BR_MPRED
 		/sys/devices/cpu/events/PM_CMPLU_STALL
+		/sys/devices/cpu/events/PM_CMPLU_STALL_BRU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_DCACHE_MISS
+		/sys/devices/cpu/events/PM_CMPLU_STALL_DFU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_DIV
+		/sys/devices/cpu/events/PM_CMPLU_STALL_ERAT_MISS
+		/sys/devices/cpu/events/PM_CMPLU_STALL_FXU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_IFU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_LSU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_REJECT
+		/sys/devices/cpu/events/PM_CMPLU_STALL_SCALAR
+		/sys/devices/cpu/events/PM_CMPLU_STALL_SCALAR_LONG
+		/sys/devices/cpu/events/PM_CMPLU_STALL_STORE
+		/sys/devices/cpu/events/PM_CMPLU_STALL_THRD
+		/sys/devices/cpu/events/PM_CMPLU_STALL_VECTOR
+		/sys/devices/cpu/events/PM_CMPLU_STALL_VECTOR_LONG
+		/sys/devices/cpu/events/PM_CYC
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_BR_MPRED
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_BR_MPRED_IC_MISS
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_IC_MISS
+		/sys/devices/cpu/events/PM_GRP_CMPL
+		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_LD_MISS_L1
+		/sys/devices/cpu/events/PM_LD_REF_L1
+		/sys/devices/cpu/events/PM_RUN_CYC
+		/sys/devices/cpu/events/PM_RUN_INST_CMPL
 
 Date:		2013/01/08
 

Documentation/ABI/testing/sysfs-bus-event_source-devices-format

@@ -9,6 +9,12 @@ Description:
 		we want to export, so that userspace can deal with sane
 		name/value pairs.
 
+		Userspace must be prepared for the possibility that attributes
+		define overlapping bit ranges. For example:
+			attr1 = 'config:0-23'
+			attr2 = 'config:0-7'
+			attr3 = 'config:12-35'
+
 		Example: 'config1:1,6-10,44'
 		Defines contents of attribute that occupies bits 1,6-10,44 of
 		perf_event_attr::config1.

Documentation/ABI/testing/sysfs-bus-iio

@@ -690,45 +690,45 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/scan_elements
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Directory containing interfaces for elements that will be
 		captured for a single triggered sample set in the buffer.
 
-What:		/sys/.../buffer/scan_elements/in_accel_x_en
-What:		/sys/.../buffer/scan_elements/in_accel_y_en
-What:		/sys/.../buffer/scan_elements/in_accel_z_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_en
-What:		/sys/.../buffer/scan_elements/in_magn_x_en
-What:		/sys/.../buffer/scan_elements/in_magn_y_en
-What:		/sys/.../buffer/scan_elements/in_magn_z_en
-What:		/sys/.../buffer/scan_elements/in_timestamp_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_en
-What:		/sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../buffer/scan_elements/in_incli_x_en
-What:		/sys/.../buffer/scan_elements/in_incli_y_en
-What:		/sys/.../buffer/scan_elements/in_pressureY_en
-What:		/sys/.../buffer/scan_elements/in_pressure_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Scan element control for triggered data capture.
 
-What:		/sys/.../buffer/scan_elements/in_accel_type
-What:		/sys/.../buffer/scan_elements/in_anglvel_type
-What:		/sys/.../buffer/scan_elements/in_magn_type
-What:		/sys/.../buffer/scan_elements/in_incli_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_type
-What:		/sys/.../buffer/scan_elements/in_voltage_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
-What:		/sys/.../buffer/scan_elements/in_timestamp_type
-What:		/sys/.../buffer/scan_elements/in_pressureY_type
-What:		/sys/.../buffer/scan_elements/in_pressure_type
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -752,29 +752,29 @@ Description:
 		For other storage combinations this attribute will be extended
 		appropriately.
 
-What:		/sys/.../buffer/scan_elements/in_accel_type_available
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type_available
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		If the type parameter can take one of a small set of values,
 		this attribute lists them.
 
-What:		/sys/.../buffer/scan_elements/in_voltageY_index
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_index
-What:		/sys/.../buffer/scan_elements/in_accel_x_index
-What:		/sys/.../buffer/scan_elements/in_accel_y_index
-What:		/sys/.../buffer/scan_elements/in_accel_z_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_index
-What:		/sys/.../buffer/scan_elements/in_magn_x_index
-What:		/sys/.../buffer/scan_elements/in_magn_y_index
-What:		/sys/.../buffer/scan_elements/in_magn_z_index
-What:		/sys/.../buffer/scan_elements/in_incli_x_index
-What:		/sys/.../buffer/scan_elements/in_incli_y_index
-What:		/sys/.../buffer/scan_elements/in_timestamp_index
-What:		/sys/.../buffer/scan_elements/in_pressureY_index
-What:		/sys/.../buffer/scan_elements/in_pressure_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-bus-pci

@@ -64,7 +64,6 @@ Description:
 		Writing a non-zero value to this attribute will
 		force a rescan of all PCI buses in the system, and
 		re-discover previously removed devices.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../msi_irqs/
 Date:		September, 2011
@@ -90,7 +89,6 @@ Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
 Description:
 		Writing a non-zero value to this attribute will
 		hot-remove the PCI device and any of its children.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
 Date:		May 2011
@@ -99,7 +97,7 @@ Description:
 		Writing a non-zero value to this attribute will
 		force a rescan of the bus and all child buses,
 		and re-discover devices removed earlier from this
-		part of the device tree.  Depends on CONFIG_HOTPLUG.
+		part of the device tree.
 
 What:		/sys/bus/pci/devices/.../rescan
 Date:		January 2009
@@ -109,7 +107,6 @@ Description:
 		force a rescan of the device's parent bus and all
 		child buses, and re-discover devices removed earlier
 		from this part of the device tree.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../reset
 Date:		July 2009

Documentation/ABI/testing/sysfs-bus-usb

@@ -236,3 +236,30 @@ Description:
 		This attribute is to expose these information to user space.
 		The file will read "hotplug", "wired" and "not used" if the
 		information is available, and "unknown" otherwise.
+
+What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
+Date:		May 2013
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		USB 2.0 devices may support hardware link power management (LPM)
+		L1 sleep state. The usb2_lpm_l1_timeout attribute allows
+		tuning the timeout for L1 inactivity timer (LPM timer), e.g.
+		needed inactivity time before host requests the device to go to L1 sleep.
+		Useful for power management tuning.
+		Supported values are 0 - 65535 microseconds.
+
+What:		/sys/bus/usb/devices/.../power/usb2_lpm_besl
+Date:		May 2013
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		USB 2.0 devices that support hardware link power management (LPM)
+		L1 sleep state now use a best effort service latency value (BESL) to
+		indicate the best effort to resumption of service to the device after the
+		initiation of the resume event.
+		If the device does not have a preferred besl value then the host can select
+		one instead. This usb2_lpm_besl attribute allows to tune the host selected besl
+		value in order to tune power saving and service latency.
+
+		Supported values are 0 - 15.
+		More information on how besl values map to microseconds can be found in
+		USB 2.0 ECN Errata for Link Power Management, section 4.10)