Merge tag 'bcm2835-for-3.10-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/dt

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: bcm2835: device tree updates

This branch adds two devices to the BCM2835 SoC device tree: the SPI
controller and the HW random number generator.

The SPI controller isn't actually instantiated in the Raspberry Pi
device tree, since there are no on-board SPI devices; it's up to the
end-user to modify their own device-tree to describe whatever they
have attached.

* tag 'bcm2835-for-3.10-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: add Broadcom BCM2835 RNG to the device tree
  ARM: bcm2835: add SPI device to DT

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/bcm2835.dtsi

@@ -34,6 +34,11 @@
 			reg = <0x7e100000 0x28>;
 		};
 
+		rng {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+		};
+
 		uart@20201000 {
 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
 			reg = <0x7e201000 0x1000>;
@@ -64,6 +69,16 @@
 			#interrupt-cells = <2>;
 		};
 
+		spi: spi@20204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clk_spi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@20205000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e205000 0x1000>;
@@ -107,5 +122,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <250000000>;
 		};
+
+		clk_spi: spi {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-frequency = <250000000>;
+		};
 	};
 };