Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2026-05-01 15:00:59 -07:00 · 2016-01-24 12:50:56 -08:00
parent e1c10879ed 07d17f0969
commit e2464688b5
130 changed files with 4923 additions and 676 deletions
@@ -0,0 +1,67 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+It handles all internal and external interrupts. This controller exists outside
+of the CPU and is the arbitrator of all interrupts (including interrupts from
+the CPU itself) before they are presented to the CPU.
+
+External interrupts have a software configurable edge polarity. Non external
+interrupts have a type and polarity that is determined by the source of the
+interrupt.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+- reg: Specifies physical base address and size of register range.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+  source connected to this controller. The value shall be 2 and interrupt
+  descriptor shall have the following format:
+
+	<hw_irq irq_type>
+
+  hw_irq - represents the hardware interrupt number as in the data sheet.
+  irq_type - is used to describe the type and polarity of an interrupt. For
+  internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+  IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+  IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Optional properties
+-------------------
+- microchip,external-irqs: u32 array of external interrupts with software
+  polarity configuration. This array corresponds to the bits in the INTCON
+  SFR.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+	compatible = "microchip,pic32mzda-evic";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x1f810000 0x1000>;
+	microchip,external-irqs = <3 8 13 18 23>;
+};
+
+Each device/peripheral must request its interrupt line with the associated type
+and polarity.
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+	...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	...
+};
@@ -0,0 +1,31 @@
+* Microchip PIC32MZDA Platforms
+
+PIC32MZDA Starter Kit
+Required root node properties:
+    - compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda"
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required.  Required properties:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,mips14KEc".
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,mips14KEc";
+		};
+	};
+
+Boot protocol
+--------------
+In accordance with Unified Hosting Interface Reference Manual (MD01069), the
+bootloader must pass the following arguments to the kernel:
+ - $a0: -2.
+ - $a1: KSEG0 address of the flattened device-tree blob.
@@ -0,0 +1,26 @@
+Mediatek Gigabit Switch
+=======================
+
+The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
+
+Required properties:
+- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the gigabit switches interrupt
+- resets: Should contain the gigabit switches resets
+- reset-names: Should contain the reset names "gsw"
+
+Example:
+
+gsw@10110000 {
+	compatible = "ralink,mt7620-gsw";
+	reg = <0x10110000 8000>;
+
+	resets = <&rstctrl 23>;
+	reset-names = "gsw";
+
+	interrupt-parent = <&intc>;
+	interrupts = <17>;
+};
@@ -0,0 +1,61 @@
+Ralink Frame Engine Ethernet controller
+=======================================
+
+The Ralink frame engine ethernet controller can be found on Ralink and
+Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
+
+Depending on the SoC, there is a number of ports connected to the CPU port
+directly and/or via a (gigabit-)switch.
+
+* Ethernet controller node
+
+Required properties:
+- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
+  "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
+  "mediatek,mt7620-eth", "mediatek,mt7621-eth"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the frame engines interrupt
+- resets: Should contain the frame engines resets
+- reset-names: Should contain the reset names "fe". If a switch is present
+  "esw" is also required.
+
+
+* Ethernet port node
+
+Required properties:
+- compatible: Should be "ralink,eth-port"
+- reg: The number of the physical port
+- phy-handle: reference to the node describing the phy
+
+Example:
+
+mdio-bus {
+	...
+	phy0: ethernet-phy@0 {
+		phy-mode = "mii";
+		reg = <0>;
+	};
+};
+
+ethernet@400000 {
+	compatible = "ralink,rt2880-eth";
+	reg = <0x00400000 10000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	resets = <&rstctrl 18>;
+	reset-names = "fe";
+
+	interrupt-parent = <&cpuintc>;
+	interrupts = <5>;
+
+	port@0 {
+		compatible = "ralink,eth-port";
+		reg = <0>;
+		phy-handle = <&phy0>;
+	};
+
+};
@@ -0,0 +1,32 @@
+Ralink Fast Ethernet Embedded Switch
+====================================
+
+The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
+SoCs (RT3x5x, RT5350, MT76x8).
+
+Required properties:
+- compatible: Should be "ralink,rt3050-esw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the embedded switches interrupt
+- resets: Should contain the embedded switches resets
+- reset-names: Should contain the reset names "esw"
+
+Optional properties:
+- ralink,portmap: can be used to choose if the default switch setup is
+  llllw or wllll
+- ralink,led_polarity: override the active high/low settings of the leds
+
+Example:
+
+esw@10110000 {
+	compatible = "ralink,rt3050-esw";
+	reg = <0x10110000 8000>;
+
+	resets = <&rstctrl 23>;
+	reset-names = "esw";
+
+	interrupt-parent = <&intc>;
+	interrupts = <17>;
+};
@@ -0,0 +1,18 @@
+* Atheros AR71XX/9XXX USB PHY
+
+Required properties:
+- compatible: "qca,ar7100-usb-phy"
+- #phys-cells: should be 0
+- reset-names: "usb-phy"[, "usb-suspend-override"]
+- resets: references to the reset controllers
+
+Example:
+
+	usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "usb-phy", "usb-suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+	};
@@ -1454,6 +1454,41 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			In such case C2/C3 won't be used again.
 			idle=nomwait: Disable mwait for CPU C-states

+	ieee754=	[MIPS] Select IEEE Std 754 conformance mode
+			Format: { strict | legacy | 2008 | relaxed }
+			Default: strict
+
+			Choose which programs will be accepted for execution
+			based on the IEEE 754 NaN encoding(s) supported by
+			the FPU and the NaN encoding requested with the value
+			of an ELF file header flag individually set by each
+			binary.  Hardware implementations are permitted to
+			support either or both of the legacy and the 2008 NaN
+			encoding mode.
+
+			Available settings are as follows:
+			strict	accept binaries that request a NaN encoding
+				supported by the FPU
+			legacy	only accept legacy-NaN binaries, if supported
+				by the FPU
+			2008	only accept 2008-NaN binaries, if supported
+				by the FPU
+			relaxed	accept any binaries regardless of whether
+				supported by the FPU
+
+			The FPU emulator is always able to support both NaN
+			encodings, so if no FPU hardware is present or it has
+			been disabled with 'nofpu', then the settings of
+			'legacy' and '2008' strap the emulator accordingly,
+			'relaxed' straps the emulator for both legacy-NaN and
+			2008-NaN, whereas 'strict' enables legacy-NaN only on
+			legacy processors and both NaN encodings on MIPS32 or
+			MIPS64 CPUs.
+
+			The setting for ABS.fmt/NEG.fmt instruction execution
+			mode generally follows that for the NaN encoding,
+			except where unsupported by hardware.
+
 	ignore_loglevel	[KNL]
 			Ignore loglevel setting - this will print /all/
 			kernel messages to the console. Useful for debugging.
@@ -2420,6 +2420,8 @@ F:	arch/mips/kernel/*bmips*
 F:	arch/mips/boot/dts/brcm/bcm*.dts*
 F:	drivers/irqchip/irq-bcm7*
 F:	drivers/irqchip/irq-brcmstb*
+F:	include/linux/bcm963xx_nvram.h
+F:	include/linux/bcm963xx_tag.h

 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Prashant Sreedharan <prashant@broadcom.com>
@@ -6216,6 +6218,14 @@ F:	arch/arm64/include/uapi/asm/kvm*
 F:	arch/arm64/include/asm/kvm*
 F:	arch/arm64/kvm/

+KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
+M:	James Hogan <james.hogan@imgtec.com>
+L:	linux-mips@linux-mips.org
+S:	Supported
+F:	arch/mips/include/uapi/asm/kvm*
+F:	arch/mips/include/asm/kvm*
+F:	arch/mips/kvm/
+
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://kernel.org/pub/linux/utils/kernel/kexec/
@@ -6313,6 +6323,12 @@ S:	Maintained
 F:	net/l3mdev
 F:	include/net/l3mdev.h

+LANTIQ MIPS ARCHITECTURE
+M:	John Crispin <blogic@openwrt.org>
+L:	linux-mips@linux-mips.org
+S:	Maintained
+F:	arch/mips/lantiq
+
 LAPB module
 L:	linux-x25@vger.kernel.org
 S:	Orphan
@@ -8997,6 +9013,12 @@ L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/aty/aty128fb.c

+RALINK MIPS ARCHITECTURE
+M:	John Crispin <blogic@openwrt.org>
+L:	linux-mips@linux-mips.org
+S:	Maintained
+F:	arch/mips/ralink
+
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 M:	Stanislaw Gruszka <sgruszka@redhat.com>
@@ -21,6 +21,7 @@ platforms += mti-malta
 platforms += mti-sead3
 platforms += netlogic
 platforms += paravirt
+platforms += pic32
 platforms += pistachio
 platforms += pmcs-msp71xx
 platforms += pnx833x
@@ -169,6 +169,7 @@ config BMIPS_GENERIC
 	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Build a generic DT-based kernel image that boots on select
 	  BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
@@ -480,6 +481,14 @@ config MIPS_MALTA
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.

+config MACH_PIC32
+	bool "Microchip PIC32 Family"
+	help
+	  This enables support for the Microchip PIC32 family of platforms.
+
+	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
+	  microcontrollers.
+
 config MIPS_SEAD3
 	bool "MIPS SEAD3 board"
 	select BOOT_ELF32
@@ -979,6 +988,7 @@ source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
+source "arch/mips/pic32/Kconfig"
 source "arch/mips/pistachio/Kconfig"
 source "arch/mips/pmcs-msp71xx/Kconfig"
 source "arch/mips/ralink/Kconfig"
@@ -1755,6 +1765,10 @@ config SYS_SUPPORTS_ZBOOT_UART16550
 	bool
 	select SYS_SUPPORTS_ZBOOT

+config SYS_SUPPORTS_ZBOOT_UART_PROM
+	bool
+	select SYS_SUPPORTS_ZBOOT
+
 config CPU_LOONGSON2
 	bool
 	select CPU_SUPPORTS_32BIT_KERNEL
@@ -2017,7 +2031,8 @@ config KVM_GUEST
 	bool "KVM Guest Kernel"
 	depends on BROKEN_ON_SMP
 	help
-	  Select this option if building a guest kernel for KVM (Trap & Emulate) mode
+	  Select this option if building a guest kernel for KVM (Trap & Emulate)
+	  mode.

 config KVM_GUEST_TIMER_FREQ
 	int "Count/Compare Timer Frequency (MHz)"
@@ -166,16 +166,6 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
 endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
-#
-# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
-# as MIPS64 R1; older versions as just R1.  This leaves the possibility open
-# that GCC might generate R2 code for -march=loongson3a which then is rejected
-# by GAS.  The cc-option can't probe for this behaviour so -march=loongson3a
-# can't easily be used safely within the kbuild framework.
-#
-cflags-$(CONFIG_CPU_LOONGSON3)  +=					\
-	$(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-	-Wa,-mips64r2 -Wa,--trap

 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
@@ -40,7 +40,7 @@

 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
-	return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
+	return !!alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
 }

 static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -68,7 +68,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)

 static int gpio1_get(struct gpio_chip *chip, unsigned offset)
 {
-	return alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
+	return !!alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
 }

 static void gpio1_set(struct gpio_chip *chip,
@@ -119,7 +119,7 @@ struct gpio_chip alchemy_gpio_chip[] = {

 static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
 {
-	return au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+	return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
 }

 static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
@@ -37,7 +37,7 @@ static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 				container_of(chip, struct ar7_gpio_chip, chip);
 	void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;

-	return readl(gpio_in) & (1 << gpio);
+	return !!(readl(gpio_in) & (1 << gpio));
 }

 static int titan_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
@@ -23,7 +23,6 @@ void ath79_clocks_init(void);
 unsigned long ath79_get_sys_clk_rate(const char *id);

 void ath79_ddr_ctrl_init(void);
-void ath79_ddr_wb_flush(unsigned int reg);

 void ath79_gpio_init(void);

@@ -26,9 +26,13 @@
 #include "common.h"
 #include "machtypes.h"

+static void __init ath79_misc_intc_domain_init(
+	struct device_node *node, int irq);
+
 static void ath79_misc_irq_handler(struct irq_desc *desc)
 {
-	void __iomem *base = ath79_reset_base;
+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	void __iomem *base = domain->host_data;
 	u32 pending;

 	pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
@@ -42,15 +46,15 @@ static void ath79_misc_irq_handler(struct irq_desc *desc)
 	while (pending) {
 		int bit = __ffs(pending);

-		generic_handle_irq(ATH79_MISC_IRQ(bit));
+		generic_handle_irq(irq_linear_revmap(domain, bit));
 		pending &= ~BIT(bit);
 	}
 }

 static void ar71xx_misc_irq_unmask(struct irq_data *d)
 {
-	unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
-	void __iomem *base = ath79_reset_base;
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
 	u32 t;

 	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
@@ -62,8 +66,8 @@ static void ar71xx_misc_irq_unmask(struct irq_data *d)

 static void ar71xx_misc_irq_mask(struct irq_data *d)
 {
-	unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
-	void __iomem *base = ath79_reset_base;
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
 	u32 t;

 	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
@@ -75,8 +79,8 @@ static void ar71xx_misc_irq_mask(struct irq_data *d)

 static void ar724x_misc_irq_ack(struct irq_data *d)
 {
-	unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
-	void __iomem *base = ath79_reset_base;
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
 	u32 t;

 	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
@@ -94,12 +98,6 @@ static struct irq_chip ath79_misc_irq_chip = {

 static void __init ath79_misc_irq_init(void)
 {
-	void __iomem *base = ath79_reset_base;
-	int i;
-
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
 	if (soc_is_ar71xx() || soc_is_ar913x())
 		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
 	else if (soc_is_ar724x() ||
@@ -110,13 +108,7 @@ static void __init ath79_misc_irq_init(void)
 	else
 		BUG();

-	for (i = ATH79_MISC_IRQ_BASE;
-	     i < ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT; i++) {
-		irq_set_chip_and_handler(i, &ath79_misc_irq_chip,
-					 handle_level_irq);
-	}
-
-	irq_set_chained_handler(ATH79_CPU_IRQ(6), ath79_misc_irq_handler);
+	ath79_misc_intc_domain_init(NULL, ATH79_CPU_IRQ(6));
 }

 static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
@@ -256,10 +248,10 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }

-#ifdef CONFIG_IRQCHIP
 static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, d->host_data);
 	return 0;
 }

@@ -268,19 +260,14 @@ static const struct irq_domain_ops misc_irq_domain_ops = {
 	.map = misc_map,
 };

-static int __init ath79_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
+static void __init ath79_misc_intc_domain_init(
+	struct device_node *node, int irq)
 {
 	void __iomem *base = ath79_reset_base;
 	struct irq_domain *domain;
-	int irq;
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq)
-		panic("Failed to get MISC IRQ");

 	domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
-			ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, NULL);
+			ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, base);
 	if (!domain)
 		panic("Failed to add MISC irqdomain");

@@ -288,9 +275,19 @@ static int __init ath79_misc_intc_of_init(
 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);

+	irq_set_chained_handler_and_data(irq, ath79_misc_irq_handler, domain);
+}

-	irq_set_chained_handler(irq, ath79_misc_irq_handler);
+static int __init ath79_misc_intc_of_init(
+	struct device_node *node, struct device_node *parent)
+{
+	int irq;

+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		panic("Failed to get MISC IRQ");
+
+	ath79_misc_intc_domain_init(node, irq);
 	return 0;
 }

@@ -349,8 +346,6 @@ static int __init ar79_cpu_intc_of_init(
 IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
 		ar79_cpu_intc_of_init);

-#endif
-
 void __init arch_init_irq(void)
 {
 	if (mips_machtype == ATH79_MACH_GENERIC_OF) {
@@ -36,10 +36,6 @@

 #define ATH79_SYS_TYPE_LEN	64

-#define AR71XX_BASE_FREQ	40000000
-#define AR724X_BASE_FREQ	5000000
-#define AR913X_BASE_FREQ	5000000
-
 static char ath79_sys_type[ATH79_SYS_TYPE_LEN];

 static void ath79_restart(char *command)
@@ -272,15 +268,10 @@ void __init device_tree_init(void)
 	unflatten_and_copy_device_tree();
 }

-static void __init ath79_generic_init(void)
-{
-	/* Nothing to do */
-}
-
 MIPS_MACHINE(ATH79_MACH_GENERIC,
 	     "Generic",
 	     "Generic AR71XX/AR724X/AR913X based board",
-	     ath79_generic_init);
+	     NULL);

 MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
 	     "DTB",
@@ -666,9 +666,15 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
 	switch (bus->hosttype) {
 	case BCMA_HOSTTYPE_PCI:
 		memset(out, 0, sizeof(struct ssb_sprom));
-		snprintf(buf, sizeof(buf), "pci/%u/%u/",
-			 bus->host_pci->bus->number + 1,
-			 PCI_SLOT(bus->host_pci->devfn));
+		/* On BCM47XX all PCI buses share the same domain */
+		if (config_enabled(CONFIG_BCM47XX))
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 bus->host_pci->bus->number + 1,
+				 PCI_SLOT(bus->host_pci->devfn));
+		else
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 pci_domain_nr(bus->host_pci->bus) + 1,
+				 bus->host_pci->bus->number);
 		bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
 		prefix = buf;
 		break;
@@ -10,6 +10,7 @@

 #define pr_fmt(fmt) "bcm63xx_nvram: " fmt

+#include <linux/bcm963xx_nvram.h>
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/export.h>
@@ -18,51 +19,19 @@

 #include <bcm63xx_nvram.h>

-/*
- * nvram structure
- */
-struct bcm963xx_nvram {
-	u32	version;
-	u8	reserved1[256];
-	u8	name[16];
-	u32	main_tp_number;
-	u32	psi_size;
-	u32	mac_addr_count;
-	u8	mac_addr_base[ETH_ALEN];
-	u8	reserved2[2];
-	u32	checksum_old;
-	u8	reserved3[720];
-	u32	checksum_high;
-};
-
-#define BCM63XX_DEFAULT_PSI_SIZE	64
-
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;

 void __init bcm63xx_nvram_init(void *addr)
 {
-	unsigned int check_len;
 	u32 crc, expected_crc;
 	u8 hcs_mac_addr[ETH_ALEN] = { 0x00, 0x10, 0x18, 0xff, 0xff, 0xff };

 	/* extract nvram data */
-	memcpy(&nvram, addr, sizeof(nvram));
+	memcpy(&nvram, addr, BCM963XX_NVRAM_V5_SIZE);

 	/* check checksum before using data */
-	if (nvram.version <= 4) {
-		check_len = offsetof(struct bcm963xx_nvram, reserved3);
-		expected_crc = nvram.checksum_old;
-		nvram.checksum_old = 0;
-	} else {
-		check_len = sizeof(nvram);
-		expected_crc = nvram.checksum_high;
-		nvram.checksum_high = 0;
-	}
-
-	crc = crc32_le(~0, (u8 *)&nvram, check_len);
-
-	if (crc != expected_crc)
+	if (bcm963xx_nvram_checksum(&nvram, &expected_crc, &crc))
 		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
 			expected_crc, crc);

@@ -116,12 +85,3 @@ int bcm63xx_nvram_get_mac_address(u8 *mac)
 	return 0;
 }
 EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
-
-int bcm63xx_nvram_get_psi_size(void)
-{
-	if (nvram.psi_size > 0)
-		return nvram.psi_size;
-
-	return BCM63XX_DEFAULT_PSI_SIZE;
-}
-EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
@@ -105,6 +105,7 @@ static const struct bmips_quirk bmips_quirk_list[] = {
 	{ "brcm,bcm33843-viper",	&bcm3384_viper_quirks		},
 	{ "brcm,bcm6328",		&bcm6328_quirks			},
 	{ "brcm,bcm6368",		&bcm6368_quirks			},
+	{ "brcm,bcm63168",		&bcm6368_quirks			},
 	{ },
 };

@@ -29,20 +29,23 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)

-targets := head.o decompress.o string.o dbg.o uart-16550.o uart-alchemy.o
-
 # decompressor objects (linked with vmlinuz)
 vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o

 ifdef CONFIG_DEBUG_ZBOOT
 vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT)		   += $(obj)/dbg.o
 vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o
 vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY)		   += $(obj)/uart-alchemy.o
 endif

-ifdef CONFIG_KERNEL_XZ
-vmlinuzobjs-y += $(obj)/../../lib/ashldi3.o
-endif
+vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
+
+$(obj)/ashldi3.o: KBUILD_CFLAGS += -I$(srctree)/arch/mips/lib
+$(obj)/ashldi3.c: $(srctree)/arch/mips/lib/ashldi3.c
+	$(call cmd,shipped)
+
+targets := $(notdir $(vmlinuzobjs-y))

 targets += vmlinux.bin
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
@@ -60,7 +63,7 @@ targets += vmlinux.bin.z
 $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,$(tool_y))

-targets += piggy.o
+targets += piggy.o dummy.o
 OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
 			--set-section-flags=.image=contents,alloc,load,readonly,data
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
--- a/Show More
+++ b/Show More