Merge tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for the kexec_file_load() syscall, which is a prereq for
     secure and trusted boot.

   - Prevent kernel execution of userspace on P9 Radix (similar to
     SMEP/PXN).

   - Sort the exception tables at build time, to save time at boot, and
     store them as relative offsets to save space in the kernel image &
     memory.

   - Allow building the kernel with thin archives, which should allow us
     to build an allyesconfig once some other fixes land.

   - Build fixes to allow us to correctly rebuild when changing the
     kernel endian from big to little or vice versa.

   - Plumbing so that we can avoid doing a full mm TLB flush on P9
     Radix.

   - Initial stack protector support (-fstack-protector).

   - Support for dumping the radix (aka. Linux) and hash page tables via
     debugfs.

   - Fix an oops in cxl coredump generation when cxl_get_fd() is used.

   - Freescale updates from Scott: "Highlights include 8xx hugepage
     support, qbman fixes/cleanup, device tree updates, and some misc
     cleanup."

   - Many and varied fixes and minor enhancements as always.

  Thanks to:
    Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
    Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
    Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
    Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
    Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
    Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
    Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
    Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
    Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"

[ And thanks to Michael, who took time off from a new baby to get this
  pull request done.   - Linus ]

* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
  powerpc/fsl/dts: add FMan node for t1042d4rdb
  powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
  powerpc/fsl/dts: add QMan and BMan nodes on t1024
  powerpc/fsl/dts: add QMan and BMan nodes on t1023
  soc/fsl/qman: test: use DEFINE_SPINLOCK()
  powerpc/fsl-lbc: use DEFINE_SPINLOCK()
  powerpc/8xx: Implement support of hugepages
  powerpc: get hugetlbpage handling more generic
  powerpc: port 64 bits pgtable_cache to 32 bits
  powerpc/boot: Request no dynamic linker for boot wrapper
  soc/fsl/bman: Use resource_size instead of computation
  soc/fsl/qe: use builtin_platform_driver
  powerpc/fsl_pmc: use builtin_platform_driver
  powerpc/83xx/suspend: use builtin_platform_driver
  powerpc/ftrace: Fix the comments for ftrace_modify_code
  powerpc/perf: macros for power9 format encoding
  powerpc/perf: power9 raw event format encoding
  powerpc/perf: update attribute_group data structure
  powerpc/perf: factor out the event format field
  powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
  ...

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -169,4 +169,5 @@ ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
 ti,tmp103		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
 ti,tmp275		Digital Temperature Sensor
+winbond,w83793		Winbond/Nuvoton H/W Monitor
 winbond,wpct301		i2c trusted platform module (TPM)

arch/powerpc/Kconfig

@@ -80,6 +80,7 @@ config ARCH_HAS_DMA_SET_COHERENT_MASK
 config PPC
 	bool
 	default y
+	select BUILDTIME_EXTABLE_SORT
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select BINFMT_ELF
@@ -163,6 +164,7 @@ config PPC
 	select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE
 	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_KERNEL_GZIP
+	select HAVE_CC_STACKPROTECTOR
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -396,6 +398,14 @@ config MPROFILE_KERNEL
 	depends on PPC64 && CPU_LITTLE_ENDIAN
 	def_bool !DISABLE_MPROFILE_KERNEL
 
+config USE_THIN_ARCHIVES
+	bool "Build the kernel using thin archives"
+	default n
+	select THIN_ARCHIVES
+	help
+	  Build the kernel using thin archives.
+	  If you're unsure say N.
+
 config IOMMU_HELPER
 	def_bool PPC64
 
@@ -456,6 +466,19 @@ config KEXEC
 	  interface is strongly in flux, so no good recommendation can be
 	  made.
 
+config KEXEC_FILE
+	bool "kexec file based system call"
+	select KEXEC_CORE
+	select BUILD_BIN2C
+	depends on PPC64
+	depends on CRYPTO=y
+	depends on CRYPTO_SHA256=y
+	help
+	  This is a new version of the kexec system call. This call is
+	  file based and takes in file descriptors as system call arguments
+	  for kernel and initramfs as opposed to a list of segments as is the
+	  case for the older kexec call.
+
 config RELOCATABLE
 	bool "Build a relocatable kernel"
 	depends on (PPC64 && !COMPILE_TEST) || (FLATMEM && (44x || FSL_BOOKE))
@@ -479,6 +502,15 @@ config RELOCATABLE
 	  setting can still be useful to bootwrappers that need to know the
 	  load address of the kernel (eg. u-boot/mkimage).
 
+config RELOCATABLE_TEST
+	bool "Test relocatable kernel"
+	depends on (PPC64 && RELOCATABLE)
+	default n
+	help
+	  This runs the relocatable kernel at the address it was initially
+	  loaded at, which tends to be non-zero and therefore test the
+	  relocation code.
+
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
 	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
@@ -490,7 +522,7 @@ config CRASH_DUMP
 
 config FA_DUMP
 	bool "Firmware-assisted dump"
-	depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC
+	depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC_CORE
 	help
 	  A robust mechanism to get reliable kernel crash dump with
 	  assistance from firmware. This approach does not use kexec,
@@ -549,6 +581,13 @@ config ARCH_SPARSEMEM_DEFAULT
 config SYS_SUPPORTS_HUGETLBFS
 	bool
 
+config ILLEGAL_POINTER_VALUE
+	hex
+	# This is roughly half way between the top of user space and the bottom
+	# of kernel space, which seems about as good as we can get.
+	default 0x5deadbeef0000000 if PPC64
+	default 0
+
 source "mm/Kconfig"
 
 config ARCH_MEMORY_PROBE

arch/powerpc/Kconfig.debug

@@ -354,4 +354,20 @@ config FAIL_IOMMU
 
 	  If you are unsure, say N.
 
+config PPC_PTDUMP
+        bool "Export kernel pagetable layout to userspace via debugfs"
+        depends on DEBUG_KERNEL
+        select DEBUG_FS
+        help
+	  This option exports the state of the kernel pagetables to a
+	  debugfs file. This is only useful for kernel developers who are
+	  working in architecture specific areas of the kernel - probably
+	  not a good idea to enable this feature in a production kernel.
+
+	  If you are unsure, say N.
+
+config PPC_HTDUMP
+	def_bool y
+	depends on PPC_PTDUMP && PPC_BOOK3S
+
 endmenu

arch/powerpc/Makefile

@@ -23,7 +23,7 @@ CROSS32AR		:= $(CROSS32_COMPILE)ar
 ifeq ($(HAS_BIARCH),y)
 ifeq ($(CROSS32_COMPILE),)
 CROSS32CC	:= $(CC) -m32
-CROSS32AR	:= GNUTARGET=elf32-powerpc $(AR)
+KBUILD_ARFLAGS	+= --target=elf32-powerpc
 endif
 endif
 
@@ -85,7 +85,7 @@ ifeq ($(HAS_BIARCH),y)
 override AS	+= -a$(BITS)
 override LD	+= -m elf$(BITS)$(LDEMULATION)
 override CC	+= -m$(BITS)
-override AR	:= GNUTARGET=elf$(BITS)-$(GNUTARGET) $(AR)
+KBUILD_ARFLAGS	+= --target=elf$(BITS)-$(GNUTARGET)
 endif
 
 LDFLAGS_vmlinux-y := -Bstatic
@@ -121,6 +121,7 @@ CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 $(MULTIPLEWORD)
 
 ifeq ($(CONFIG_PPC_BOOK3S_64),y)
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
+CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power4
 else
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
 endif
@@ -249,6 +250,7 @@ core-y				+= arch/powerpc/kernel/ \
 core-$(CONFIG_XMON)		+= arch/powerpc/xmon/
 core-$(CONFIG_KVM) 		+= arch/powerpc/kvm/
 core-$(CONFIG_PERF_EVENTS)	+= arch/powerpc/perf/
+core-$(CONFIG_KEXEC_FILE)	+= arch/powerpc/purgatory/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
@@ -275,16 +277,16 @@ zImage: relocs_check
 endif
 
 $(BOOT_TARGETS1): vmlinux
-	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 $(BOOT_TARGETS2): vmlinux
-	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 
 bootwrapper_install:
-	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 %.dtb: scripts
-	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 # Used to create 'merged defconfigs'
 # To use it $(call) it with the first argument as the base defconfig

arch/powerpc/boot/Makefile

@@ -172,10 +172,6 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc
 $(obj)/empty.c:
 	$(Q)touch $@
 
-$(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S
-	$(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \
-		-D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
-
 $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
 	$(Q)cp $< $@
 
@@ -357,17 +353,17 @@ $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
 # Don't put the ramdisk on the pattern rule; when its missing make will try
 # the pattern rule with less dependencies that also matches (even with the
 # hard dependency listed).
-$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
+$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE
 	$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
 
-$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits)
+$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE
 	$(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
 
 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
 	$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
 	$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
 
 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
@@ -375,31 +371,31 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
 $(obj)/vmlinux.strip: vmlinux
 	$(STRIP) -s -R .comment $< -o $@
 
-$(obj)/uImage: vmlinux $(wrapperbits)
+$(obj)/uImage: vmlinux $(wrapperbits) FORCE
 	$(call if_changed,wrap,uboot)
 
-$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
 
-$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
-$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
 
-$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
 	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
 
 # Rule to build device tree blobs

arch/powerpc/boot/dts/fsl/t1023rdb.dts

@@ -41,6 +41,27 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -72,6 +93,14 @@
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};
 
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/fsl/t1023si-post.dtsi

@@ -34,6 +34,21 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -180,6 +195,92 @@
 	};
 };
 
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		cell-index = <0x0>;
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		cell-index = <0x1>;
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		cell-index = <2>;
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		cell-index = <0x3>;
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		cell-index = <0x4>;
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		cell-index = <0x5>;
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -413,6 +514,8 @@
 	};
 
 /include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
 
 /include/ "qoriq-fman3l-0.dtsi"
 /include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"

arch/powerpc/boot/dts/fsl/t1024qds.dts

@@ -41,6 +41,27 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -80,6 +101,14 @@
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};
 
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/fsl/t1024rdb.dts

@@ -41,6 +41,31 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -82,6 +107,14 @@
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};
 
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/fsl/t1042d4rdb.dts

@@ -48,6 +48,58 @@
 					"fsl,deepsleep-cpld";
 		};
 	};
+
+	soc: soc@ffe000000 {
+		fman0: fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_0: ethernet-phy@02 {
+					reg = <0x02>;
+				};
+
+				phy_sgmii_1: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+
+				phy_sgmii_2: ethernet-phy@01 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_0: ethernet-phy@04 {
+					reg = <0x04>;
+				};
+
+				phy_rgmii_1: ethernet-phy@05 {
+					reg = <0x05>;
+				};
+			};
+		};
+	};
+
 };
 
 #include "t1042si-post.dtsi"

arch/powerpc/boot/dts/fsl/t4240rdb.dts

@@ -125,6 +125,10 @@
 		};
 
 		i2c@118000 {
+			hwmon@2f {
+				compatible = "winbond,w83793";
+				reg = <0x2f>;
+			};
 			eeprom@52 {
 				compatible = "at24,24c256";
 				reg = <0x52>;

arch/powerpc/boot/ps3-head.S

@@ -57,11 +57,6 @@ __system_reset_overlay:
 	bctr
 
 1:
-	/* Save the value at addr zero for a null pointer write check later. */
-
-	li	r4, 0
-	lwz	r3, 0(r4)
-
 	/* Primary delays then goes to _zimage_start in wrapper. */
 
 	or	31, 31, 31 /* db16cyc */

arch/powerpc/boot/ps3.c

@@ -119,13 +119,12 @@ void ps3_copy_vectors(void)
 	flush_cache((void *)0x100, 512);
 }
 
-void platform_init(unsigned long null_check)
+void platform_init(void)
 {
 	const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
 	void *chosen;
 	unsigned long ft_addr;
 	u64 rm_size;
-	unsigned long val;
 
 	console_ops.write = ps3_console_write;
 	platform_ops.exit = ps3_exit;
@@ -153,11 +152,6 @@ void platform_init(unsigned long null_check)
 
 	printf(" flat tree at 0x%lx\n\r", ft_addr);
 
-	val = *(unsigned long *)0;
-
-	if (val != null_check)
-		printf("null check failed: %lx != %lx\n\r", val, null_check);
-
 	((kernel_entry_t)0)(ft_addr, 0, NULL);
 
 	ps3_exit();

arch/powerpc/boot/wrapper

@@ -181,6 +181,28 @@ case "$elfformat" in
     elf32-powerpc)	format=elf32ppc	;;
 esac
 
+ld_version()
+{
+    # Poached from scripts/ld-version.sh, but we don't want to call that because
+    # this script (wrapper) is distributed separately from the kernel source.
+    # Extract linker version number from stdin and turn into single number.
+    awk '{
+	gsub(".*\\)", "");
+	gsub(".*version ", "");
+	gsub("-.*", "");
+	split($1,a, ".");
+	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
+	exit
+    }'
+}
+
+# Do not include PT_INTERP segment when linking pie. Non-pie linking
+# just ignores this option.
+LD_VERSION=$(${CROSS}ld --version | ld_version)
+LD_NO_DL_MIN_VERSION=$(echo 2.26 | ld_version)
+if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VERSION" ] ; then
+	nodl="--no-dynamic-linker"
+fi
 
 platformo=$object/"$platform".o
 lds=$object/zImage.lds
@@ -446,7 +468,7 @@ if [ "$platform" != "miboot" ]; then
         text_start="-Ttext $link_address"
     fi
 #link everything
-    ${CROSS}ld -m $format -T $lds $text_start $pie -o "$ofile" \
+    ${CROSS}ld -m $format -T $lds $text_start $pie $nodl -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi

arch/powerpc/configs/amigaone_defconfig

@@ -45,12 +45,6 @@ CONFIG_PARPORT_PC_FIFO=y
 CONFIG_BLK_DEV_FD=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_BLK_DEV_VIA82CXXX=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -61,6 +55,10 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 # CONFIG_SCSI_SYM53C8XX_MMIO is not set
+CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_VIA=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_VORTEX=y
 CONFIG_8139CP=y

arch/powerpc/configs/cell_defconfig

@@ -108,16 +108,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_IDE=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_AEC62XX=y
-CONFIG_BLK_DEV_SIIMAGE=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
 CONFIG_SATA_PROMISE=y
+CONFIG_PATA_ARTOP=y
 CONFIG_PATA_PDC2027X=m
+CONFIG_PATA_SIL680=y
+CONFIG_ATA_GENERIC=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m

arch/powerpc/configs/chrp32_defconfig

@@ -42,12 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_FD=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_VIA82CXXX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
@@ -56,6 +50,10 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_ATA=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_PCNET32=y
 CONFIG_NET_TULIP=y

arch/powerpc/configs/fsl-emb-nonhw.config

@@ -44,6 +44,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAME_WARN=1024
 CONFIG_FTL=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_HIGH_RES_TIMERS=y
@@ -104,8 +105,13 @@ CONFIG_PACKET=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_QNX4FS_FS=m
 CONFIG_RCU_TRACE=y
+CONFIG_RESET_CONTROLLER=y
 CONFIG_ROOT_NFS=y
 CONFIG_SYSV_FS=m
 CONFIG_SYSVIPC=y

arch/powerpc/configs/g5_defconfig

@@ -60,10 +60,6 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
@@ -73,6 +69,7 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_ATA=y
 CONFIG_SATA_SVW=y
+CONFIG_PATA_MACIO=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y

arch/powerpc/configs/maple_defconfig

@@ -39,16 +39,15 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_IPR=y
 CONFIG_ATA=y
+CONFIG_PATA_AMD=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_AMD8111_ETH=y
 CONFIG_TIGON3=y