Merge tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 3.11-rc3.

  Lots of little things, nothing major.  A number of new device ids,
  build fixes for DMA, and a bunch of other minor things.  All of these
  have been in the linux-next tree"

* tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  usb: Clear both buffers when clearing a control transfer TT buffer.
  usb/gadget: free opts struct on error recovery
  USB: mos7840: fix memory leak in open
  usb: serial: option.c: remove ONDA MT825UP product ID fromdriver
  usb: serial: option: add Olivetti Olicard 200
  usb: serial: option: blacklist ONDA MT689DC QMI interface
  xhci: fix null pointer dereference on ring_doorbell_for_active_rings
  usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0
  usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabled
  usb: xhci: Mark two functions __maybe_unused
  xhci: Avoid NULL pointer deref when host dies.
  usb: serial: option: Add ONYX 3G device support
  USB: ti_usb_3410_5052: fix dynamic-id matching
  usb: option: add TP-LINK MA260
  USB: option: add D-Link DWM-152/C1 and DWM-156/C1
  USB: EHCI: Fix resume signalling on remote wakeup
  USB: cp210x: add MMB and PI ZigBee USB Device Support
  usb: cp210x support SEL C662 Vendor/Device
  USB: option: append Petatel NP10T device to GSM modems list
  USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga
  ...

drivers/usb/core/hub.c

@@ -668,6 +668,15 @@ resubmit:
 static inline int
 hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
 {
+	/* Need to clear both directions for control ep */
+	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_CONTROL) {
+		int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+				HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+				devinfo ^ 0x8000, tt, NULL, 0, 1000);
+		if (status)
+			return status;
+	}
 	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
 			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
 			       tt, NULL, 0, 1000);
@@ -2848,6 +2857,15 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
 				USB_CTRL_SET_TIMEOUT);
 }
 
+/* Count of wakeup-enabled devices at or below udev */
+static unsigned wakeup_enabled_descendants(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+
+	return udev->do_remote_wakeup +
+			(hub ? hub->wakeup_enabled_descendants : 0);
+}
+
 /*
  * usb_port_suspend - suspend a usb device's upstream port
  * @udev: device that's no longer in active use, not a root hub
@@ -2888,8 +2906,8 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
  * Linux (2.6) currently has NO mechanisms to initiate that:  no khubd
  * timer, no SRP, no requests through sysfs.
  *
- * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get
- * suspended only when their bus goes into global suspend (i.e., the root
+ * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
+ * suspended until their bus goes into global suspend (i.e., the root
  * hub is suspended).  Nevertheless, we change @udev->state to
  * USB_STATE_SUSPENDED as this is the device's "logical" state.  The actual
  * upstream port setting is stored in @udev->port_is_suspended.
@@ -2960,15 +2978,21 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	/* see 7.1.7.6 */
 	if (hub_is_superspeed(hub->hdev))
 		status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
-	else if (PMSG_IS_AUTO(msg))
-		status = set_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_SUSPEND);
+
 	/*
 	 * For system suspend, we do not need to enable the suspend feature
 	 * on individual USB-2 ports.  The devices will automatically go
 	 * into suspend a few ms after the root hub stops sending packets.
 	 * The USB 2.0 spec calls this "global suspend".
+	 *
+	 * However, many USB hubs have a bug: They don't relay wakeup requests
+	 * from a downstream port if the port's suspend feature isn't on.
+	 * Therefore we will turn on the suspend feature if udev or any of its
+	 * descendants is enabled for remote wakeup.
 	 */
+	else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
+		status = set_port_feature(hub->hdev, port1,
+				USB_PORT_FEAT_SUSPEND);
 	else {
 		really_suspend = false;
 		status = 0;
@@ -3003,15 +3027,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		if (!PMSG_IS_AUTO(msg))
 			status = 0;
 	} else {
-		/* device has up to 10 msec to fully suspend */
 		dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
 				(PMSG_IS_AUTO(msg) ? "auto-" : ""),
 				udev->do_remote_wakeup);
-		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 		if (really_suspend) {
 			udev->port_is_suspended = 1;
+
+			/* device has up to 10 msec to fully suspend */
 			msleep(10);
 		}
+		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 	}
 
 	/*
@@ -3293,7 +3318,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	unsigned		port1;
 	int			status;
 
-	/* Warn if children aren't already suspended */
+	/*
+	 * Warn if children aren't already suspended.
+	 * Also, add up the number of wakeup-enabled descendants.
+	 */
+	hub->wakeup_enabled_descendants = 0;
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
 		struct usb_device	*udev;
 
@@ -3303,6 +3332,9 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 			if (PMSG_IS_AUTO(msg))
 				return -EBUSY;
 		}
+		if (udev)
+			hub->wakeup_enabled_descendants +=
+					wakeup_enabled_descendants(udev);
 	}
 
 	if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {

drivers/usb/core/hub.h

@@ -59,6 +59,9 @@ struct usb_hub {
 	struct usb_tt		tt;		/* Transaction Translator */
 
 	unsigned		mA_per_port;	/* current for each child */
+#ifdef	CONFIG_PM
+	unsigned		wakeup_enabled_descendants;
+#endif
 
 	unsigned		limited_power:1;
 	unsigned		quiescing:1;

drivers/usb/dwc3/Kconfig

@@ -1,6 +1,6 @@
 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
-	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS
+	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed

drivers/usb/dwc3/core.c

@@ -450,7 +450,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	}
 
 	if (IS_ERR(dwc->usb3_phy)) {
-		ret = PTR_ERR(dwc->usb2_phy);
+		ret = PTR_ERR(dwc->usb3_phy);
 
 		/*
 		 * if -ENXIO is returned, it means PHY layer wasn't

drivers/usb/dwc3/core.h

@@ -759,8 +759,8 @@ struct dwc3 {
 
 struct dwc3_event_type {
 	u32	is_devspec:1;
-	u32	type:6;
-	u32	reserved8_31:25;
+	u32	type:7;
+	u32	reserved8_31:24;
 } __packed;
 
 #define DWC3_DEPEVT_XFERCOMPLETE	0x01

drivers/usb/dwc3/gadget.c

@@ -1584,6 +1584,7 @@ err1:
 	__dwc3_gadget_ep_disable(dwc->eps[0]);
 
 err0:
+	dwc->gadget_driver = NULL;
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;

drivers/usb/gadget/Kconfig

@@ -193,6 +193,7 @@ config USB_FUSB300
 	   Faraday usb device controller FUSB300 driver
 
 config USB_FOTG210_UDC
+	depends on HAS_DMA
 	tristate "Faraday FOTG210 USB Peripheral Controller"
 	help
 	   Faraday USB2.0 OTG controller which can be configured as
@@ -328,13 +329,14 @@ config USB_S3C_HSUDC
 
 config USB_MV_UDC
 	tristate "Marvell USB2.0 Device Controller"
-	depends on GENERIC_HARDIRQS
+	depends on GENERIC_HARDIRQS && HAS_DMA
 	help
 	  Marvell Socs (including PXA and MMP series) include a high speed
 	  USB2.0 OTG controller, which can be configured as high speed or
 	  full speed USB peripheral.
 
 config USB_MV_U3D
+	depends on HAS_DMA
 	tristate "MARVELL PXA2128 USB 3.0 controller"
 	help
 	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
@@ -639,6 +641,7 @@ config USB_CONFIGFS_RNDIS
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
+	select USB_U_RNDIS
 	select USB_F_RNDIS
 	help
 	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,

drivers/usb/gadget/at91_udc.c

@@ -870,8 +870,8 @@ static void clk_on(struct at91_udc *udc)
 	if (udc->clocked)
 		return;
 	udc->clocked = 1;
-	clk_enable(udc->iclk);
-	clk_enable(udc->fclk);
+	clk_prepare_enable(udc->iclk);
+	clk_prepare_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)
@@ -880,8 +880,8 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable(udc->fclk);
-	clk_disable(udc->iclk);
+	clk_disable_unprepare(udc->fclk);
+	clk_disable_unprepare(udc->iclk);
 }
 
 /*
@@ -1725,7 +1725,7 @@ static int at91udc_probe(struct platform_device *pdev)
 	/* init software state */
 	udc = &controller;
 	udc->gadget.dev.parent = dev;
-	if (pdev->dev.of_node)
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
 		at91udc_of_init(udc, pdev->dev.of_node);
 	else
 		memcpy(&udc->board, dev->platform_data,
@@ -1782,12 +1782,14 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
-	clk_enable(udc->iclk);
+	retval = clk_prepare_enable(udc->iclk);
+	if (retval)
+		goto fail1;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable(udc->iclk);
+	clk_disable_unprepare(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);

drivers/usb/gadget/f_ecm.c

@@ -959,8 +959,11 @@ static struct usb_function_instance *ecm_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = ecm_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_PTR(PTR_ERR(opts->net));
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "", &ecm_func_type);
 

drivers/usb/gadget/f_eem.c

@@ -593,8 +593,11 @@ static struct usb_function_instance *eem_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = eem_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_CAST(opts->net);
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type);
 

drivers/usb/gadget/f_ncm.c

@@ -1350,8 +1350,11 @@ static struct usb_function_instance *ncm_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = ncm_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_PTR(PTR_ERR(opts->net));
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type);
 

drivers/usb/gadget/f_phonet.c

@@ -656,8 +656,11 @@ static struct usb_function_instance *phonet_alloc_inst(void)
 
 	opts->func_inst.free_func_inst = phonet_free_inst;
 	opts->net = gphonet_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_PTR(PTR_ERR(opts->net));
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "",
 			&phonet_func_type);

drivers/usb/gadget/f_rndis.c

@@ -963,8 +963,11 @@ static struct usb_function_instance *rndis_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = rndis_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_CAST(opts->net);
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "",
 				    &rndis_func_type);

drivers/usb/gadget/f_subset.c

@@ -505,8 +505,11 @@ static struct usb_function_instance *geth_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = geth_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_CAST(opts->net);
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "",
 				    &gether_func_type);

drivers/usb/gadget/fotg210-udc.c

@@ -1074,7 +1074,7 @@ static struct usb_gadget_ops fotg210_gadget_ops = {
 	.udc_stop		= fotg210_udc_stop,
 };
 
-static int __exit fotg210_udc_remove(struct platform_device *pdev)
+static int fotg210_udc_remove(struct platform_device *pdev)
 {
 	struct fotg210_udc *fotg210 = dev_get_drvdata(&pdev->dev);
 
@@ -1088,7 +1088,7 @@ static int __exit fotg210_udc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init fotg210_udc_probe(struct platform_device *pdev)
+static int fotg210_udc_probe(struct platform_device *pdev)
 {
 	struct resource *res, *ires;
 	struct fotg210_udc *fotg210 = NULL;

drivers/usb/gadget/mv_u3d_core.c

@@ -1776,7 +1776,7 @@ static int mv_u3d_remove(struct platform_device *dev)
 	kfree(u3d->eps);
 
 	if (u3d->irq)
-		free_irq(u3d->irq, &dev->dev);
+		free_irq(u3d->irq, u3d);
 
 	if (u3d->cap_regs)
 		iounmap(u3d->cap_regs);
@@ -1974,7 +1974,7 @@ static int mv_u3d_probe(struct platform_device *dev)
 	return 0;
 
 err_unregister:
-	free_irq(u3d->irq, &dev->dev);
+	free_irq(u3d->irq, u3d);
 err_request_irq:
 err_get_irq:
 	kfree(u3d->status_req);

drivers/usb/gadget/udc-core.c

@@ -50,6 +50,8 @@ static DEFINE_MUTEX(udc_lock);
 
 /* ------------------------------------------------------------------------- */
 
+#ifdef	CONFIG_HAS_DMA
+
 int usb_gadget_map_request(struct usb_gadget *gadget,
 		struct usb_request *req, int is_in)
 {
@@ -99,6 +101,8 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget,
 }
 EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
 
+#endif	/* CONFIG_HAS_DMA */
+
 /* ------------------------------------------------------------------------- */
 
 void usb_gadget_set_state(struct usb_gadget *gadget,
@@ -194,9 +198,11 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 	dev_set_name(&gadget->dev, "gadget");
 	gadget->dev.parent = parent;
 
+#ifdef	CONFIG_HAS_DMA
 	dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask);
 	gadget->dev.dma_parms = parent->dma_parms;
 	gadget->dev.dma_mask = parent->dma_mask;
+#endif
 
 	if (release)
 		gadget->dev.release = release;

drivers/usb/host/ehci-hub.c

@@ -874,6 +874,7 @@ static int ehci_hub_control (
 				ehci->reset_done[wIndex] = jiffies
 						+ msecs_to_jiffies(20);
 				usb_hcd_start_port_resume(&hcd->self, wIndex);
+				set_bit(wIndex, &ehci->resuming_ports);
 				/* check the port again */
 				mod_timer(&ehci_to_hcd(ehci)->rh_timer,
 						ehci->reset_done[wIndex]);

drivers/usb/host/pci-quirks.h

@@ -13,6 +13,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 void sb800_prefetch(struct device *dev, int on);
 #else
+struct pci_dev;
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}

drivers/usb/host/xhci-pci.c

@@ -93,7 +93,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
-		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;