[PATCH] kernel-doc: fix fusion and i2o docs

Correct lots of typos, kernel-doc warnings, & kernel-doc usage in fusion and
i2o drivers.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/message/fusion/mptfc.c

@@ -1395,8 +1395,7 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptfc_init - Register MPT adapter(s) as SCSI host(s) with
- *	linux scsi mid-layer.
+ *	mptfc_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
  *
  *	Returns 0 for success, non-zero for failure.
  */
@@ -1440,7 +1439,7 @@ mptfc_init(void)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptfc_remove - Removed fc infrastructure for devices
+ *	mptfc_remove - Remove fc infrastructure for devices
  *	@pdev: Pointer to pci_dev structure
  *
  */

drivers/message/fusion/mptscsih.c

@@ -1230,15 +1230,15 @@ mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len)
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mptscsih_proc_info - Return information about MPT adapter
+ * 	@host:   scsi host struct
+ * 	@buffer: if write, user data; if read, buffer for user
+ *	@start: returns the buffer address
+ * 	@offset: if write, 0; if read, the current offset into the buffer from
+ * 		 the previous read.
+ * 	@length: if write, return length;
+ *	@func:   write = 1; read = 0
  *
  *	(linux scsi_host_template.info routine)
- *
- * 	buffer: if write, user data; if read, buffer for user
- * 	length: if write, return length;
- * 	offset: if write, 0; if read, the current offset into the buffer from
- * 		the previous read.
- * 	hostno: scsi host number
- *	func:   if write = 1; if read = 0
  */
 int
 mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
@@ -1902,8 +1902,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptscsih_host_reset - Perform a SCSI host adapter RESET!
- *	new_eh variant
+ *	mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
  *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
  *
  *	(linux scsi_host_template.eh_host_reset_handler routine)
@@ -1949,8 +1948,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptscsih_tm_pending_wait - wait for pending task management request to
- *		complete.
+ *	mptscsih_tm_pending_wait - wait for pending task management request to complete
  *	@hd: Pointer to MPT host structure.
  *
  *	Returns {SUCCESS,FAILED}.
@@ -1982,6 +1980,7 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
 /**
  *	mptscsih_tm_wait_for_completion - wait for completion of TM task
  *	@hd: Pointer to MPT host structure.
+ *	@timeout: timeout in seconds
  *
  *	Returns {SUCCESS,FAILED}.
  */
@@ -3429,8 +3428,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 /**
  *	mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
  *	@hd: Pointer to a SCSI HOST structure
- *	@vtarget: per device private data
- *	@lun: lun
+ *	@vdevice: virtual target device
  *
  *	Uses the ISR, but with special processing.
  *	MUST be single-threaded.

drivers/message/fusion/mptspi.c

@@ -1100,8 +1100,7 @@ static struct pci_driver mptspi_driver = {
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptspi_init - Register MPT adapter(s) as SCSI host(s) with
- *	linux scsi mid-layer.
+ *	mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
  *
  *	Returns 0 for success, non-zero for failure.
  */
@@ -1135,7 +1134,6 @@ mptspi_init(void)
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mptspi_exit - Unregisters MPT adapter(s)
- *
  */
 static void __exit
 mptspi_exit(void)

drivers/message/i2o/bus-osm.c

@@ -56,6 +56,9 @@ static int i2o_bus_scan(struct i2o_device *dev)
 /**
  *	i2o_bus_store_scan - Scan the I2O Bus Adapter
  *	@d: device which should be scanned
+ *	@attr: device_attribute
+ *	@buf: output buffer
+ *	@count: buffer size
  *
  *	Returns count.
  */

drivers/message/i2o/device.c

@@ -54,8 +54,8 @@ static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd,
  *	@dev: I2O device to claim
  *	@drv: I2O driver which wants to claim the device
  *
- *	Do the leg work to assign a device to a given OSM. If the claim succeed
- *	the owner of the rimary. If the attempt fails a negative errno code
+ *	Do the leg work to assign a device to a given OSM. If the claim succeeds,
+ *	the owner is the primary. If the attempt fails a negative errno code
  *	is returned. On success zero is returned.
  */
 int i2o_device_claim(struct i2o_device *dev)
@@ -208,7 +208,7 @@ static struct i2o_device *i2o_device_alloc(void)
 
 /**
  *	i2o_device_add - allocate a new I2O device and add it to the IOP
- *	@iop: I2O controller where the device is on
+ *	@c: I2O controller that the device is on
  *	@entry: LCT entry of the I2O device
  *
  *	Allocate a new I2O device and initialize it with the LCT entry. The
@@ -280,7 +280,7 @@ err:
 
 /**
  *	i2o_device_remove - remove an I2O device from the I2O core
- *	@dev: I2O device which should be released
+ *	@i2o_dev: I2O device which should be released
  *
  *	Is used on I2O controller removal or LCT modification, when the device
  *	is removed from the system. Note that the device could still hang

drivers/message/i2o/driver.c

@@ -34,9 +34,7 @@ static spinlock_t i2o_drivers_lock;
 static struct i2o_driver **i2o_drivers;
 
 /**
- *	i2o_bus_match - Tell if a I2O device class id match the class ids of
- *			the I2O driver (OSM)
- *
+ *	i2o_bus_match - Tell if I2O device class id matches the class ids of the I2O driver (OSM)
  *	@dev: device which should be verified
  *	@drv: the driver to match against
  *
@@ -248,7 +246,7 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m)
 
 /**
  *	i2o_driver_notify_controller_add_all - Send notify of added controller
- *					       to all I2O drivers
+ *	@c: newly added controller
  *
  *	Send notifications to all registered drivers that a new controller was
  *	added.
@@ -267,8 +265,8 @@ void i2o_driver_notify_controller_add_all(struct i2o_controller *c)
 }
 
 /**
- *	i2o_driver_notify_controller_remove_all - Send notify of removed
- *						  controller to all I2O drivers
+ *	i2o_driver_notify_controller_remove_all - Send notify of removed controller
+ *	@c: controller that is being removed
  *
  *	Send notifications to all registered drivers that a controller was
  *	removed.
@@ -287,8 +285,8 @@ void i2o_driver_notify_controller_remove_all(struct i2o_controller *c)
 }
 
 /**
- *	i2o_driver_notify_device_add_all - Send notify of added device to all
- *					   I2O drivers
+ *	i2o_driver_notify_device_add_all - Send notify of added device
+ *	@i2o_dev: newly added I2O device
  *
  *	Send notifications to all registered drivers that a device was added.
  */
@@ -306,8 +304,8 @@ void i2o_driver_notify_device_add_all(struct i2o_device *i2o_dev)
 }
 
 /**
- *	i2o_driver_notify_device_remove_all - Send notify of removed device to
- *					      all I2O drivers
+ *	i2o_driver_notify_device_remove_all - Send notify of removed device
+ *	@i2o_dev: device that is being removed
  *
  *	Send notifications to all registered drivers that a device was removed.
  */
@@ -362,7 +360,7 @@ int __init i2o_driver_init(void)
 /**
  *	i2o_driver_exit - clean up I2O drivers (OSMs)
  *
- *	Unregisters the I2O bus and free driver array.
+ *	Unregisters the I2O bus and frees driver array.
  */
 void __exit i2o_driver_exit(void)
 {

drivers/message/i2o/exec-osm.c

@@ -94,8 +94,8 @@ static struct i2o_exec_wait *i2o_exec_wait_alloc(void)
 };
 
 /**
- *	i2o_exec_wait_free - Free a i2o_exec_wait struct
- *	@i2o_exec_wait: I2O wait data which should be cleaned up
+ *	i2o_exec_wait_free - Free an i2o_exec_wait struct
+ *	@wait: I2O wait data which should be cleaned up
  */
 static void i2o_exec_wait_free(struct i2o_exec_wait *wait)
 {
@@ -105,7 +105,7 @@ static void i2o_exec_wait_free(struct i2o_exec_wait *wait)
 /**
  * 	i2o_msg_post_wait_mem - Post and wait a message with DMA buffers
  *	@c: controller
- *	@m: message to post
+ *	@msg: message to post
  *	@timeout: time in seconds to wait
  *	@dma: i2o_dma struct of the DMA buffer to free on failure
  *
@@ -269,6 +269,7 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 /**
  *	i2o_exec_show_vendor_id - Displays Vendor ID of controller
  *	@d: device of which the Vendor ID should be displayed
+ *	@attr: device_attribute to display
  *	@buf: buffer into which the Vendor ID should be printed
  *
  *	Returns number of bytes printed into buffer.
@@ -290,6 +291,7 @@ static ssize_t i2o_exec_show_vendor_id(struct device *d,
 /**
  *	i2o_exec_show_product_id - Displays Product ID of controller
  *	@d: device of which the Product ID should be displayed
+ *	@attr: device_attribute to display
  *	@buf: buffer into which the Product ID should be printed
  *
  *	Returns number of bytes printed into buffer.
@@ -365,7 +367,7 @@ static int i2o_exec_remove(struct device *dev)
 
 /**
  *	i2o_exec_lct_modified - Called on LCT NOTIFY reply
- *	@c: I2O controller on which the LCT has modified
+ *	@work: work struct for a specific controller
  *
  *	This function handles asynchronus LCT NOTIFY replies. It parses the
  *	new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY

drivers/message/i2o/i2o_block.c

@@ -259,7 +259,7 @@ static int i2o_block_device_unlock(struct i2o_device *dev, u32 media_id)
 /**
  *	i2o_block_device_power - Power management for device dev
  *	@dev: I2O device which should receive the power management request
- *	@operation: Operation which should be send
+ *	@op: Operation to send
  *
  *	Send a power management request to the device dev.
  *
@@ -315,7 +315,7 @@ static inline struct i2o_block_request *i2o_block_request_alloc(void)
  *	i2o_block_request_free - Frees a I2O block request
  *	@ireq: I2O block request which should be freed
  *
- *	Fres the allocated memory (give it back to the request mempool).
+ *	Frees the allocated memory (give it back to the request mempool).
  */
 static inline void i2o_block_request_free(struct i2o_block_request *ireq)
 {
@@ -326,6 +326,7 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq)
  *	i2o_block_sglist_alloc - Allocate the SG list and map it
  *	@c: I2O controller to which the request belongs
  *	@ireq: I2O block request
+ *	@mptr: message body pointer
  *
  *	Builds the SG list and map it to be accessable by the controller.
  *
@@ -490,7 +491,7 @@ static void i2o_block_end_request(struct request *req, int uptodate,
  *	i2o_block_reply - Block OSM reply handler.
  *	@c: I2O controller from which the message arrives
  *	@m: message id of reply
- *	qmsg: the actuall I2O message reply
+ *	@msg: the actual I2O message reply
  *
  *	This function gets all the message replies.
  *
@@ -602,6 +603,8 @@ static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls,
 
 /**
  *	i2o_block_open - Open the block device
+ *	@inode: inode for block device being opened
+ *	@file: file to open
  *
  *	Power up the device, mount and lock the media. This function is called,
  *	if the block device is opened for access.
@@ -629,6 +632,8 @@ static int i2o_block_open(struct inode *inode, struct file *file)
 
 /**
  *	i2o_block_release - Release the I2O block device
+ *	@inode: inode for block device being released
+ *	@file: file to close
  *
  *	Unlock and unmount the media, and power down the device. Gets called if
  *	the block device is closed.
@@ -675,6 +680,8 @@ static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 
 /**
  *	i2o_block_ioctl - Issue device specific ioctl calls.
+ *	@inode: inode for block device ioctl
+ *	@file: file for ioctl
  *	@cmd: ioctl command
  *	@arg: arg
  *
@@ -902,7 +909,7 @@ static int i2o_block_transfer(struct request *req)
 
 /**
  *	i2o_block_request_fn - request queue handling function
- *	q: request queue from which the request could be fetched
+ *	@q: request queue from which the request could be fetched
  *
  *	Takes the next request from the queue, transfers it and if no error
  *	occurs dequeue it from the queue. On arrival of the reply the message

drivers/message/i2o/i2o_proc.c

@@ -163,7 +163,7 @@ static int print_serial_number(struct seq_file *seq, u8 * serialno, int max_len)
  *	i2o_get_class_name - 	do i2o class name lookup
  *	@class: class number
  *
- *	Return a descriptive string for an i2o class
+ *	Return a descriptive string for an i2o class.
  */
 static const char *i2o_get_class_name(int class)
 {

drivers/message/i2o/i2o_scsi.c

@@ -411,8 +411,7 @@ static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
 };
 
 /**
- *	i2o_scsi_notify_device_remove - Retrieve notifications of removed
- *				        devices
+ *	i2o_scsi_notify_device_remove - Retrieve notifications of removed devices
  *	@i2o_dev: the I2O device which was removed
  *
  *	If a I2O device is removed, we catch the notification to remove the
@@ -432,8 +431,7 @@ static void i2o_scsi_notify_device_remove(struct i2o_device *i2o_dev)
 };
 
 /**
- *	i2o_scsi_notify_controller_add - Retrieve notifications of added
- *					 controllers
+ *	i2o_scsi_notify_controller_add - Retrieve notifications of added controllers
  *	@c: the controller which was added
  *
  *	If a I2O controller is added, we catch the notification to add a
@@ -463,8 +461,7 @@ static void i2o_scsi_notify_controller_add(struct i2o_controller *c)
 };
 
 /**
- *	i2o_scsi_notify_controller_remove - Retrieve notifications of removed
- *					    controllers
+ *	i2o_scsi_notify_controller_remove - Retrieve notifications of removed controllers
  *	@c: the controller which was removed
  *
  *	If a I2O controller is removed, we catch the notification to remove the
@@ -751,7 +748,7 @@ static int i2o_scsi_abort(struct scsi_cmnd *SCpnt)
  *	@capacity: size in sectors
  *	@ip: geometry array
  *
- *	This is anyones guess quite frankly. We use the same rules everyone
+ *	This is anyone's guess quite frankly. We use the same rules everyone
  *	else appears to and hope. It seems to work.
  */
 

drivers/message/i2o/pci.c

@@ -259,6 +259,7 @@ static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id)
 
 /**
  *	i2o_pci_irq_enable - Allocate interrupt for I2O controller
+ *	@c: i2o_controller that the request is for
  *
  *	Allocate an interrupt for the I2O controller, and activate interrupts
  *	on the I2O controller.
@@ -305,7 +306,7 @@ static void i2o_pci_irq_disable(struct i2o_controller *c)
 
 /**
  *	i2o_pci_probe - Probe the PCI device for an I2O controller
- *	@dev: PCI device to test
+ *	@pdev: PCI device to test
  *	@id: id which matched with the PCI device id table
  *
  *	Probe the PCI device for any device which is a memory of the
@@ -447,7 +448,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 
 /**
  *	i2o_pci_remove - Removes a I2O controller from the system
- *	pdev: I2O controller which should be removed
+ *	@pdev: I2O controller which should be removed
  *
  *	Reset the I2O controller, disable interrupts and remove all allocated
  *	resources.

include/linux/i2o.h

@@ -986,7 +986,8 @@ extern void i2o_driver_unregister(struct i2o_driver *);
 
 /**
  *	i2o_driver_notify_controller_add - Send notification of added controller
- *					   to a single I2O driver
+ *	@drv: I2O driver
+ *	@c: I2O controller
  *
  *	Send notification of added controller to a single registered driver.
  */
@@ -998,8 +999,9 @@ static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
 };
 
 /**
- *	i2o_driver_notify_controller_remove - Send notification of removed
- *					      controller to a single I2O driver
+ *	i2o_driver_notify_controller_remove - Send notification of removed controller
+ *	@drv: I2O driver
+ *	@c: I2O controller
  *
  *	Send notification of removed controller to a single registered driver.
  */
@@ -1011,8 +1013,9 @@ static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
 };
 
 /**
- *	i2o_driver_notify_device_add - Send notification of added device to a
- *				       single I2O driver
+ *	i2o_driver_notify_device_add - Send notification of added device
+ *	@drv: I2O driver
+ *	@i2o_dev: the added i2o_device
  *
  *	Send notification of added device to a single registered driver.
  */
@@ -1025,7 +1028,8 @@ static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
 
 /**
  *	i2o_driver_notify_device_remove - Send notification of removed device
- *					  to a single I2O driver
+ *	@drv: I2O driver
+ *	@i2o_dev: the added i2o_device
  *
  *	Send notification of removed device to a single registered driver.
  */
@@ -1148,7 +1152,7 @@ static inline void i2o_msg_post(struct i2o_controller *c,
 /**
  * 	i2o_msg_post_wait - Post and wait a message and wait until return
  *	@c: controller
- *	@m: message to post
+ *	@msg: message to post
  *	@timeout: time in seconds to wait
  *
  * 	This API allows an OSM to post a message and then be told whether or