Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...

MAINTAINERS

@@ -2751,6 +2751,15 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
+EDAC-CAVIUM
+M:	Ralf Baechle <ralf@linux-mips.org>
+M:	David Daney <david.daney@cavium.com>
+L:	linux-edac@vger.kernel.org
+L:	linux-mips@linux-mips.org
+W:	bluesmoke.sourceforge.net
+S:	Supported
+F:	drivers/edac/octeon_edac*
+
 EDAC-E752X
 M:	Mark Gross <mark.gross@intel.com>
 M:	Doug Thompson <dougthompson@xmission.com>

arch/mips/Kconfig

@@ -19,6 +19,7 @@ config MIPS
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select RTC_LIB if !MACH_LOONGSON
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -55,8 +56,8 @@ choice
 config MIPS_ALCHEMY
 	bool "Alchemy processor based machines"
 	select 64BIT_PHYS_ADDR
-	select CEVT_R4K_LIB
-	select CSRC_R4K_LIB
+	select CEVT_R4K
+	select CSRC_R4K
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -107,16 +108,16 @@ config ATH79
 
 config BCM47XX
 	bool "Broadcom BCM47XX based boards"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
-	select CFE
 	help
 	 Support for BCM47XX based boards
 
@@ -193,8 +194,8 @@ config MACH_DECSTATION
 
 config MACH_JAZZ
 	bool "Jazz family of machines"
-	select ARC
-	select ARC32
+	select FW_ARC
+	select FW_ARC32
 	select ARCH_MAY_HAVE_PC_FDC
 	select CEVT_R4K
 	select CSRC_R4K
@@ -417,27 +418,6 @@ config PMC_MSP
 	  of integrated peripherals, interfaces and DSPs in addition to
 	  a variety of MIPS cores.
 
-config PMC_YOSEMITE
-	bool "PMC-Sierra Yosemite eval board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM9000
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_SMP
-	help
-	  Yosemite is an evaluation board for the RM9000x2 processor
-	  manufactured by PMC-Sierra.
-
 config POWERTV
 	bool "Cisco PowerTV"
 	select BOOT_ELF32
@@ -458,8 +438,8 @@ config POWERTV
 
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
-	select ARC
-	select ARC32
+	select FW_ARC
+	select FW_ARC32
 	select BOOT_ELF32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -498,8 +478,8 @@ config SGI_IP22
 
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
-	select ARC
-	select ARC64
+	select FW_ARC
+	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
 	select DMA_COHERENT
@@ -519,8 +499,8 @@ config SGI_IP27
 config SGI_IP28
 	bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	select ARC
-	select ARC64
+	select FW_ARC
+	select FW_ARC64
 	select BOOT_ELF64
 	select CEVT_R4K
 	select CSRC_R4K
@@ -555,8 +535,8 @@ config SGI_IP28
 
 config SGI_IP32
 	bool "SGI IP32 (O2)"
-	select ARC
-	select ARC32
+	select FW_ARC
+	select FW_ARC32
 	select BOOT_ELF32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -674,8 +654,8 @@ config SIBYTE_BIGSUR
 
 config SNI_RM
 	bool "SNI RM200/300/400"
-	select ARC if CPU_LITTLE_ENDIAN
-	select ARC32 if CPU_LITTLE_ENDIAN
+	select FW_ARC if CPU_LITTLE_ENDIAN
+	select FW_ARC32 if CPU_LITTLE_ENDIAN
 	select SNIPROM if CPU_BIG_ENDIAN
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
@@ -776,6 +756,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select EDAC_SUPPORT
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
@@ -819,7 +800,7 @@ config NLM_XLR_BOARD
 	select CSRC_R4K
 	select IRQ_CPU
 	select ARCH_SUPPORTS_MSI
-	select ZONE_DMA if 64BIT
+	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
 	select USB_ARCH_HAS_OHCI if USB_SUPPORT
@@ -847,7 +828,7 @@ config NLM_XLP_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
-	select ZONE_DMA if 64BIT
+	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
 	select USE_OF
@@ -908,7 +889,7 @@ config SCHED_OMIT_FRAME_POINTER
 #
 # Select some configuration options automatically based on user selections.
 #
-config ARC
+config FW_ARC
 	bool
 
 config ARCH_MAY_HAVE_PC_FDC
@@ -926,11 +907,7 @@ config CEVT_DS1287
 config CEVT_GT641XX
 	bool
 
-config CEVT_R4K_LIB
-	bool
-
 config CEVT_R4K
-	select CEVT_R4K_LIB
 	bool
 
 config CEVT_SB1250
@@ -948,11 +925,7 @@ config CSRC_IOASIC
 config CSRC_POWERTV
 	bool
 
-config CSRC_R4K_LIB
-	bool
-
 config CSRC_R4K
-	select CSRC_R4K_LIB
 	bool
 
 config CSRC_SB1250
@@ -963,7 +936,7 @@ config GPIO_TXX9
 	select ARCH_REQUIRE_GPIOLIB
 	bool
 
-config CFE
+config FW_CFE
 	bool
 
 config ARCH_DMA_ADDR_T_64BIT
@@ -1079,15 +1052,15 @@ config SYS_SUPPORTS_HUGETLBFS
 	depends on CPU_SUPPORTS_HUGEPAGES && 64BIT
 	default y
 
+config MIPS_HUGE_TLB_SUPPORT
+	def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
+
 config IRQ_CPU
 	bool
 
 config IRQ_CPU_RM7K
 	bool
 
-config IRQ_CPU_RM9K
-	bool
-
 config IRQ_MSP_SLP
 	bool
 
@@ -1112,10 +1085,6 @@ config PCI_GT64XXX_PCI0
 config NO_EXCEPT_FILL
 	bool
 
-config MIPS_RM9122
-	bool
-	select SERIAL_RM9000
-
 config SOC_EMMA2RH
 	bool
 	select CEVT_R4K
@@ -1161,9 +1130,6 @@ config SOC_PNX8550
 config SWAP_IO_SPACE
 	bool
 
-config SERIAL_RM9000
-	bool
-
 config SGI_HAS_INDYDOG
 	bool
 
@@ -1185,7 +1151,7 @@ config SGI_HAS_I8042
 config DEFAULT_SGI_PARTITION
 	bool
 
-config ARC32
+config FW_ARC32
 	bool
 
 config SNIPROM
@@ -1218,7 +1184,7 @@ config ARC_PROMLIB
 	depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
 	default y
 
-config ARC64
+config FW_ARC64
 	bool
 
 config BOOT_ELF64
@@ -1370,6 +1336,7 @@ config CPU_R4X00
 	depends on SYS_HAS_CPU_R4X00
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  MIPS Technologies R4000-series processors other than 4300, including
 	  the R4000, R4400, R4600, and 4700.
@@ -1380,12 +1347,14 @@ config CPU_TX49XX
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HUGEPAGES
 
 config CPU_R5000
 	bool "R5000"
 	depends on SYS_HAS_CPU_R5000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  MIPS Technologies R5000-series processors other than the Nevada.
 
@@ -1394,6 +1363,7 @@ config CPU_R5432
 	depends on SYS_HAS_CPU_R5432
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HUGEPAGES
 
 config CPU_R5500
 	bool "R5500"
@@ -1419,6 +1389,7 @@ config CPU_NEVADA
 	depends on SYS_HAS_CPU_NEVADA
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.
 
@@ -1439,6 +1410,7 @@ config CPU_R10000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  MIPS Technologies R10000-series processors.
 
@@ -1449,15 +1421,7 @@ config CPU_RM7000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
-
-config CPU_RM9000
-	bool "RM9000"
-	depends on SYS_HAS_CPU_RM9000
-	select CPU_HAS_PREFETCH
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
-	select WEAK_ORDERING
+	select CPU_SUPPORTS_HUGEPAGES
 
 config CPU_SB1
 	bool "SB1"
@@ -1465,6 +1429,7 @@ config CPU_SB1
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
 	select WEAK_ORDERING
 
 config CPU_CAVIUM_OCTEON
@@ -1528,9 +1493,9 @@ config CPU_XLR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
-	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLR/XLS processors.
 
@@ -1544,6 +1509,7 @@ config CPU_XLP
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH
+	select CPU_MIPSR2
 	help
 	  Netlogic Microsystems XLP processors.
 endchoice
@@ -1591,6 +1557,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
 
 config CPU_LOONGSON1
 	bool
@@ -1675,9 +1642,6 @@ config SYS_HAS_CPU_R10000
 config SYS_HAS_CPU_RM7000
 	bool
 
-config SYS_HAS_CPU_RM9000
-	bool
-
 config SYS_HAS_CPU_SB1
 	bool
 
@@ -1757,7 +1721,7 @@ config CPU_SUPPORTS_UNCACHED_ACCELERATED
 	bool
 config MIPS_PGD_C0_CONTEXT
 	bool
-	default y if 64BIT && CPU_MIPSR2
+	default y if 64BIT && CPU_MIPSR2 && !CPU_XLP
 
 #
 # Set to y for ptrace access to watch registers.
@@ -2188,7 +2152,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
+	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2366,6 +2330,29 @@ config KEXEC
 	  support.  As of this writing the exact hardware interface is
 	  strongly in flux, so no good recommendation can be made.
 
+config CRASH_DUMP
+	  bool "Kernel crash dumps"
+	  help
+	  Generate crash dump after being started by kexec.
+	  This should be normally only set in special crash dump kernels
+	  which are loaded in the main kernel with kexec-tools into
+	  a specially reserved region and then later executed after
+	  a crash by kdump/kexec. The crash dump kernel must be compiled
+	  to a memory address not used by the main kernel or firmware using
+	  PHYSICAL_START.
+
+config PHYSICAL_START
+	  hex "Physical address where the kernel is loaded"
+	  default "0xffffffff84000000" if 64BIT
+	  default "0x84000000" if 32BIT
+	  depends on CRASH_DUMP
+	  help
+	  This gives the CKSEG0 or KSEG0 address where the kernel is loaded.
+	  If you plan to use kernel for capturing the crash dump change
+	  this value to start of the reserved region (the "X" value as
+	  specified in the "crashkernel=YM@XM" command line boot parameter
+	  passed to the panic-ed kernel).
+
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
@@ -2572,6 +2559,8 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/mips/Kconfig.debug"

arch/mips/Makefile

@@ -145,8 +145,6 @@ cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_RM9000)	+= $(call cc-option,-march=rm9000,-march=r5000) \
-			-Wa,--trap
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap
@@ -173,9 +171,9 @@ endif
 #
 # Firmware support
 #
-libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
-libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
-libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
+libs-$(CONFIG_FW_ARC)		+= arch/mips/fw/arc/
+libs-$(CONFIG_FW_CFE)		+= arch/mips/fw/cfe/
+libs-$(CONFIG_FW_SNIPROM)	+= arch/mips/fw/sni/
 libs-y				+= arch/mips/fw/lib/
 
 #
@@ -192,6 +190,10 @@ endif
 #
 include $(srctree)/arch/mips/Kbuild.platforms
 
+ifdef CONFIG_PHYSICAL_START
+load-y                                  = $(CONFIG_PHYSICAL_START)
+endif
+
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 

arch/mips/ar7/platform.c

@@ -202,8 +202,11 @@ static struct resource physmap_flash_resource = {
 	.end	= 0x107fffff,
 };
 
+static const char *ar7_probe_types[] = { "ar7part", NULL };
+
 static struct physmap_flash_data physmap_flash_data = {
 	.width	= 2,
+	.part_probe_types = ar7_probe_types,
 };
 
 static struct platform_device physmap_flash = {

arch/mips/bcm47xx/Kconfig

@@ -9,6 +9,7 @@ config BCM47XX_SSB
 	select SSB_EMBEDDED
 	select SSB_B43_PCI_BRIDGE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
+	select SSB_DRIVER_GPIO
 	default y
 	help
 	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -23,6 +24,7 @@ config BCM47XX_BCMA
 	select BCMA_DRIVER_MIPS
 	select BCMA_HOST_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
+	select BCMA_DRIVER_GPIO
 	default y
 	help
 	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

arch/mips/bcm47xx/Makefile

@@ -3,5 +3,5 @@
 # under Linux.
 #
 
-obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
 obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o

arch/mips/bcm47xx/gpio.c

@@ -1,102 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
- */
-
-#include <linux/export.h>
-#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_driver_chipcommon.h>
-#include <linux/ssb/ssb_driver_extif.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-#include <asm/mach-bcm47xx/gpio.h>
-
-#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
-static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
-#else
-static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
-#endif
-
-int gpio_request(unsigned gpio, const char *tag)
-{
-	switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
-	case BCM47XX_BUS_TYPE_SSB:
-		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
-		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-			return -EINVAL;
-
-		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
-		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-			return -EINVAL;
-
-		if (test_and_set_bit(gpio, gpio_in_use))
-			return -EBUSY;
-
-		return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	case BCM47XX_BUS_TYPE_BCMA:
-		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
-			return -EINVAL;
-
-		if (test_and_set_bit(gpio, gpio_in_use))
-			return -EBUSY;
-
-		return 0;
-#endif
-	}
-	return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
-	switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
-	case BCM47XX_BUS_TYPE_SSB:
-		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
-		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-			return;
-
-		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
-		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-			return;
-
-		clear_bit(gpio, gpio_in_use);
-		return;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	case BCM47XX_BUS_TYPE_BCMA:
-		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
-			return;
-
-		clear_bit(gpio, gpio_in_use);
-		return;
-#endif
-	}
-}
-EXPORT_SYMBOL(gpio_free);
-
-int gpio_to_irq(unsigned gpio)
-{
-	switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
-	case BCM47XX_BUS_TYPE_SSB:
-		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
-			return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
-		else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
-			return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
-		else
-			return -EINVAL;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	case BCM47XX_BUS_TYPE_BCMA:
-		return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
-#endif
-	}
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(gpio_to_irq);

arch/mips/bcm47xx/prom.c

@@ -1,6 +1,7 @@
 /*
  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
  *  Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -27,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/smp.h>
 #include <asm/bootinfo.h>
 #include <asm/fw/cfe/cfe_api.h>
 #include <asm/fw/cfe/cfe_error.h>
@@ -127,6 +129,8 @@ static __init void prom_init_mem(void)
 {
 	unsigned long mem;
 	unsigned long max;
+	unsigned long off;
+	struct cpuinfo_mips *c = &current_cpu_data;
 
 	/* Figure out memory size by finding aliases.
 	 *
@@ -143,18 +147,26 @@ static __init void prom_init_mem(void)
 	 * max contains the biggest possible address supported by the platform.
 	 * If the method wants to try something above we assume 128MB ram.
 	 */
-	max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
+	off = (unsigned long)prom_init;
+	max = off | ((128 << 20) - 1);
 	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-		if (((unsigned long)(prom_init) + mem) > max) {
+		if ((off + mem) > max) {
 			mem = (128 << 20);
 			printk(KERN_DEBUG "assume 128MB RAM\n");
 			break;
 		}
-		if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
-		    *(unsigned long *)(prom_init))
+		if (!memcmp(prom_init, prom_init + mem, 32))
 			break;
 	}
 
+	/* Ignoring the last page when ddr size is 128M. Cached
+	 * accesses to last page is causing the processor to prefetch
+	 * using address above 128M stepping out of the ddr address
+	 * space.
+	 */
+	if (c->cputype == CPU_74K && (mem == (128  << 20)))
+		mem -= 0x1000;
+
 	add_memory_region(0, mem, BOOT_MEM_RAM);
 }
 

arch/mips/bcm47xx/setup.c

@@ -94,7 +94,7 @@ static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
 			 bus->host_pci->bus->number + 1,
 			 PCI_SLOT(bus->host_pci->devfn));
-		bcm47xx_fill_sprom(out, prefix);
+		bcm47xx_fill_sprom(out, prefix, false);
 		return 0;
 	} else {
 		printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
@@ -113,7 +113,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
 
 	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
-	bcm47xx_fill_sprom(&iv->sprom, NULL);
+	bcm47xx_fill_sprom(&iv->sprom, NULL, false);
 
 	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
@@ -165,16 +165,17 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
 			 bus->host_pci->bus->number + 1,
 			 PCI_SLOT(bus->host_pci->devfn));
-		bcm47xx_fill_sprom(out, prefix);
+		bcm47xx_fill_sprom(out, prefix, false);
 		return 0;
 	case BCMA_HOSTTYPE_SOC:
 		memset(out, 0, sizeof(struct ssb_sprom));
-		bcm47xx_fill_sprom_ethernet(out, NULL);
 		core = bcma_find_core(bus, BCMA_CORE_80211);
 		if (core) {
 			snprintf(prefix, sizeof(prefix), "sb/%u/",
 				 core->core_index);
-			bcm47xx_fill_sprom(out, prefix);
+			bcm47xx_fill_sprom(out, prefix, true);
+		} else {
+			bcm47xx_fill_sprom(out, NULL, false);
 		}
 		return 0;
 	default:

arch/mips/bcm47xx/wgt634u.c

@@ -11,6 +11,7 @@
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
 #include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_embedded.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 #include <linux/gpio.h>
@@ -116,7 +117,8 @@ static irqreturn_t gpio_interrupt(int irq, void *ignored)
 
 	/* Interrupt are level triggered, revert the interrupt polarity
 	   to clear the interrupt. */
-	gpio_polarity(WGT634U_GPIO_RESET, state);
+	ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
+			  state ? 1 << WGT634U_GPIO_RESET : 0);
 
 	if (!state) {
 		printk(KERN_INFO "Reset button pressed");
@@ -150,7 +152,9 @@ static int __init wgt634u_init(void)
 				 gpio_interrupt, IRQF_SHARED,
 				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
 			gpio_direction_input(WGT634U_GPIO_RESET);
-			gpio_intmask(WGT634U_GPIO_RESET, 1);
+			ssb_gpio_intmask(&bcm47xx_bus.ssb,
+					 1 << WGT634U_GPIO_RESET,
+					 1 << WGT634U_GPIO_RESET);
 			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
 					    SSB_CHIPCO_IRQ_GPIO,
 					    SSB_CHIPCO_IRQ_GPIO);

arch/mips/bcm63xx/Makefile

@@ -1,6 +1,7 @@
-obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-		   dev-spi.o dev-uart.o dev-wdt.o dev-usb-usbd.o
+obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+		   dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
+		   dev-usb-usbd.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -18,6 +18,7 @@
 #include <bcm63xx_dev_uart.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
+#include <bcm63xx_nvram.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
@@ -29,8 +30,6 @@
 
 #define PFX	"board_bcm963xx: "
 
-static struct bcm963xx_nvram nvram;
-static unsigned int mac_addr_used;
 static struct board_info board;
 
 /*
@@ -715,51 +714,15 @@ const char *board_get_name(void)
 	return board.name;
 }
 
-/*
- * register & return a new board mac address
- */
-static int board_get_mac_address(u8 *mac)
-{
-	u8 *oui;
-	int count;
-
-	if (mac_addr_used >= nvram.mac_addr_count) {
-		printk(KERN_ERR PFX "not enough mac address\n");
-		return -ENODEV;
-	}
-
-	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
-	oui = mac + ETH_ALEN/2 - 1;
-	count = mac_addr_used;
-
-	while (count--) {
-		u8 *p = mac + ETH_ALEN - 1;
-
-		do {
-			(*p)++;
-			if (*p != 0)
-				break;
-			p--;
-		} while (p != oui);
-
-		if (p == oui) {
-			printk(KERN_ERR PFX "unable to fetch mac address\n");
-			return -ENODEV;
-		}
-	}
-
-	mac_addr_used++;
-	return 0;
-}
-
 /*
  * early init callback, read nvram data from flash and checksum it
  */
 void __init board_prom_init(void)
 {
-	unsigned int check_len, i;
-	u8 *boot_addr, *cfe, *p;
+	unsigned int i;
+	u8 *boot_addr, *cfe;
 	char cfe_version[32];
+	char *board_name;
 	u32 val;
 
 	/* read base address of boot chip select (0)
@@ -782,27 +745,15 @@ void __init board_prom_init(void)
 		strcpy(cfe_version, "unknown");
 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
 
-	/* extract nvram data */
-	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-
-	/* check checksum before using data */
-	if (nvram.version <= 4)
-		check_len = offsetof(struct bcm963xx_nvram, checksum_old);
-	else
-		check_len = sizeof(nvram);
-	val = 0;
-	p = (u8 *)&nvram;
-	while (check_len--)
-		val += *p;
-	if (val) {
+	if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
 		printk(KERN_ERR PFX "invalid nvram checksum\n");
 		return;
 	}
 
+	board_name = bcm63xx_nvram_get_name();
 	/* find board by name */
 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
-			    sizeof(nvram.name)))
+		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
 			continue;
 		/* copy, board desc array is marked initdata */
 		memcpy(&board, bcm963xx_boards[i], sizeof(board));
@@ -812,7 +763,7 @@ void __init board_prom_init(void)
 	/* bail out if board is not found, will complain later */
 	if (!board.name[0]) {
 		char name[17];
-		memcpy(name, nvram.name, 16);
+		memcpy(name, board_name, 16);
 		name[16] = 0;
 		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
 		       name);
@@ -890,11 +841,11 @@ int __init board_register_devices(void)
 		bcm63xx_pcmcia_register();
 
 	if (board.has_enet0 &&
-	    !board_get_mac_address(board.enet0.mac_addr))
+	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
 
 	if (board.has_enet1 &&
-	    !board_get_mac_address(board.enet1.mac_addr))
+	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
 		bcm63xx_enet_register(1, &board.enet1);
 
 	if (board.has_usbd)
@@ -907,7 +858,7 @@ int __init board_register_devices(void)
 	 * do this after registering enet devices
 	 */
 #ifdef CONFIG_SSB_PCIHOST
-	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		if (ssb_arch_register_fallback_sprom(

arch/mips/bcm63xx/clk.c

@@ -14,6 +14,7 @@
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_io.h>
 #include <bcm63xx_regs.h>
+#include <bcm63xx_reset.h>
 #include <bcm63xx_clk.h>
 
 static DEFINE_MUTEX(clocks_mutex);
@@ -124,15 +125,10 @@ static void enetsw_set(struct clk *clk, int enable)
 			CKCTL_6368_SWPKT_USB_EN |
 			CKCTL_6368_SWPKT_SAR_EN, enable);
 	if (enable) {
-		u32 val;
-
 		/* reset switch core afer clock change */
-		val = bcm_perf_readl(PERF_SOFTRESET_6368_REG);
-		val &= ~SOFTRESET_6368_ENETSW_MASK;
-		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
 		msleep(10);
-		val |= SOFTRESET_6368_ENETSW_MASK;
-		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 0);
 		msleep(10);
 	}
 }
@@ -222,15 +218,10 @@ static void xtm_set(struct clk *clk, int enable)
 			CKCTL_6368_SWPKT_SAR_EN, enable);
 
 	if (enable) {
-		u32 val;
-
 		/* reset sar core afer clock change */
-		val = bcm_perf_readl(PERF_SOFTRESET_6368_REG);
-		val &= ~SOFTRESET_6368_SAR_MASK;
-		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 1);
 		mdelay(1);
-		val |= SOFTRESET_6368_SAR_MASK;
-		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 0);
 		mdelay(1);
 	}
 }
@@ -252,6 +243,19 @@ static struct clk clk_ipsec = {
 	.set	= ipsec_set,
 };
 
+/*
+ * PCIe clock
+ */
+
+static void pcie_set(struct clk *clk, int enable)
+{
+	bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+}
+
+static struct clk clk_pcie = {
+	.set	= pcie_set,
+};
+
 /*
  * Internal peripheral clock
  */
@@ -313,6 +317,8 @@ struct clk *clk_get(struct device *dev, const char *id)
 		return &clk_pcm;
 	if (BCMCPU_IS_6368() && !strcmp(id, "ipsec"))
 		return &clk_ipsec;
+	if (BCMCPU_IS_6328() && !strcmp(id, "pcie"))
+		return &clk_pcie;
 	return ERR_PTR(-ENOENT);
 }
 

arch/mips/bcm63xx/nvram.c

@@ -0,0 +1,107 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#define pr_fmt(fmt) "bcm63xx_nvram: " fmt
+
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/if_ether.h>
+
+#include <bcm63xx_nvram.h>
+
+/*
+ * nvram structure
+ */
+struct bcm963xx_nvram {
+	u32	version;
+	u8	reserved1[256];
+	u8	name[16];
+	u32	main_tp_number;
+	u32	psi_size;
+	u32	mac_addr_count;
+	u8	mac_addr_base[ETH_ALEN];
+	u8	reserved2[2];
+	u32	checksum_old;
+	u8	reserved3[720];
+	u32	checksum_high;
+};
+
+static struct bcm963xx_nvram nvram;
+static int mac_addr_used;
+
+int __init bcm63xx_nvram_init(void *addr)
+{
+	unsigned int check_len;
+	u32 crc, expected_crc;
+
+	/* extract nvram data */
+	memcpy(&nvram, addr, sizeof(nvram));
+
+	/* check checksum before using data */
+	if (nvram.version <= 4) {
+		check_len = offsetof(struct bcm963xx_nvram, reserved3);
+		expected_crc = nvram.checksum_old;
+		nvram.checksum_old = 0;
+	} else {
+		check_len = sizeof(nvram);
+		expected_crc = nvram.checksum_high;
+		nvram.checksum_high = 0;
+	}
+
+	crc = crc32_le(~0, (u8 *)&nvram, check_len);
+
+	if (crc != expected_crc)
+		return -EINVAL;
+
+	return 0;
+}
+
+u8 *bcm63xx_nvram_get_name(void)
+{
+	return nvram.name;
+}
+EXPORT_SYMBOL(bcm63xx_nvram_get_name);
+
+int bcm63xx_nvram_get_mac_address(u8 *mac)
+{
+	u8 *oui;
+	int count;
+
+	if (mac_addr_used >= nvram.mac_addr_count) {
+		pr_err("not enough mac addresses\n");
+		return -ENODEV;
+	}
+
+	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+	oui = mac + ETH_ALEN/2 - 1;
+	count = mac_addr_used;
+
+	while (count--) {
+		u8 *p = mac + ETH_ALEN - 1;
+
+		do {
+			(*p)++;
+			if (*p != 0)
+				break;
+			p--;
+		} while (p != oui);
+
+		if (p == oui) {
+			pr_err("unable to fetch mac address\n");
+			return -ENODEV;
+		}
+	}
+
+	mac_addr_used++;
+	return 0;
+}
+EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);

arch/mips/bcm63xx/reset.c

@@ -0,0 +1,223 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_reset.h>
+
+#define __GEN_RESET_BITS_TABLE(__cpu)					\
+	[BCM63XX_RESET_SPI]		= BCM## __cpu ##_RESET_SPI,	\
+	[BCM63XX_RESET_ENET]		= BCM## __cpu ##_RESET_ENET,	\
+	[BCM63XX_RESET_USBH]		= BCM## __cpu ##_RESET_USBH,	\
+	[BCM63XX_RESET_USBD]		= BCM## __cpu ##_RESET_USBD,	\
+	[BCM63XX_RESET_DSL]		= BCM## __cpu ##_RESET_DSL,	\
+	[BCM63XX_RESET_SAR]		= BCM## __cpu ##_RESET_SAR,	\
+	[BCM63XX_RESET_EPHY]		= BCM## __cpu ##_RESET_EPHY,	\
+	[BCM63XX_RESET_ENETSW]		= BCM## __cpu ##_RESET_ENETSW,	\
+	[BCM63XX_RESET_PCM]		= BCM## __cpu ##_RESET_PCM,	\
+	[BCM63XX_RESET_MPI]		= BCM## __cpu ##_RESET_MPI,	\
+	[BCM63XX_RESET_PCIE]		= BCM## __cpu ##_RESET_PCIE,	\
+	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT,
+
+#define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
+#define BCM6328_RESET_ENET	0
+#define BCM6328_RESET_USBH	SOFTRESET_6328_USBH_MASK
+#define BCM6328_RESET_USBD	SOFTRESET_6328_USBS_MASK
+#define BCM6328_RESET_DSL	0
+#define BCM6328_RESET_SAR	SOFTRESET_6328_SAR_MASK
+#define BCM6328_RESET_EPHY	SOFTRESET_6328_EPHY_MASK
+#define BCM6328_RESET_ENETSW	SOFTRESET_6328_ENETSW_MASK
+#define BCM6328_RESET_PCM	SOFTRESET_6328_PCM_MASK
+#define BCM6328_RESET_MPI	0
+#define BCM6328_RESET_PCIE	\
+				(SOFTRESET_6328_PCIE_MASK |		\
+				 SOFTRESET_6328_PCIE_CORE_MASK |	\
+				 SOFTRESET_6328_PCIE_HARD_MASK)
+#define BCM6328_RESET_PCIE_EXT	SOFTRESET_6328_PCIE_EXT_MASK
+
+#define BCM6338_RESET_SPI	SOFTRESET_6338_SPI_MASK
+#define BCM6338_RESET_ENET	SOFTRESET_6338_ENET_MASK
+#define BCM6338_RESET_USBH	SOFTRESET_6338_USBH_MASK
+#define BCM6338_RESET_USBD	SOFTRESET_6338_USBS_MASK
+#define BCM6338_RESET_DSL	SOFTRESET_6338_ADSL_MASK
+#define BCM6338_RESET_SAR	SOFTRESET_6338_SAR_MASK
+#define BCM6338_RESET_EPHY	0
+#define BCM6338_RESET_ENETSW	0
+#define BCM6338_RESET_PCM	0
+#define BCM6338_RESET_MPI	0
+#define BCM6338_RESET_PCIE	0
+#define BCM6338_RESET_PCIE_EXT	0
+
+#define BCM6348_RESET_SPI	SOFTRESET_6348_SPI_MASK
+#define BCM6348_RESET_ENET	SOFTRESET_6348_ENET_MASK
+#define BCM6348_RESET_USBH	SOFTRESET_6348_USBH_MASK
+#define BCM6348_RESET_USBD	SOFTRESET_6348_USBS_MASK
+#define BCM6348_RESET_DSL	SOFTRESET_6348_ADSL_MASK
+#define BCM6348_RESET_SAR	SOFTRESET_6348_SAR_MASK
+#define BCM6348_RESET_EPHY	0
+#define BCM6348_RESET_ENETSW	0
+#define BCM6348_RESET_PCM	0
+#define BCM6348_RESET_MPI	0
+#define BCM6348_RESET_PCIE	0
+#define BCM6348_RESET_PCIE_EXT	0
+
+#define BCM6358_RESET_SPI	SOFTRESET_6358_SPI_MASK
+#define BCM6358_RESET_ENET	SOFTRESET_6358_ENET_MASK
+#define BCM6358_RESET_USBH	SOFTRESET_6358_USBH_MASK
+#define BCM6358_RESET_USBD	0
+#define BCM6358_RESET_DSL	SOFTRESET_6358_ADSL_MASK
+#define BCM6358_RESET_SAR	SOFTRESET_6358_SAR_MASK
+#define BCM6358_RESET_EPHY	SOFTRESET_6358_EPHY_MASK
+#define BCM6358_RESET_ENETSW	0
+#define BCM6358_RESET_PCM	SOFTRESET_6358_PCM_MASK
+#define BCM6358_RESET_MPI	SOFTRESET_6358_MPI_MASK
+#define BCM6358_RESET_PCIE	0
+#define BCM6358_RESET_PCIE_EXT	0
+
+#define BCM6368_RESET_SPI	SOFTRESET_6368_SPI_MASK
+#define BCM6368_RESET_ENET	0
+#define BCM6368_RESET_USBH	SOFTRESET_6368_USBH_MASK
+#define BCM6368_RESET_USBD	SOFTRESET_6368_USBS_MASK
+#define BCM6368_RESET_DSL	0
+#define BCM6368_RESET_SAR	SOFTRESET_6368_SAR_MASK
+#define BCM6368_RESET_EPHY	SOFTRESET_6368_EPHY_MASK
+#define BCM6368_RESET_ENETSW	0
+#define BCM6368_RESET_PCM	SOFTRESET_6368_PCM_MASK
+#define BCM6368_RESET_MPI	SOFTRESET_6368_MPI_MASK
+#define BCM6368_RESET_PCIE	0
+#define BCM6368_RESET_PCIE_EXT	0
+
+#ifdef BCMCPU_RUNTIME_DETECT
+
+/*
+ * core reset bits
+ */
+static const u32 bcm6328_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6328)
+};
+
+static const u32 bcm6338_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6338)
+};
+
+static const u32 bcm6348_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6348)
+};
+
+static const u32 bcm6358_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6358)
+};
+
+static const u32 bcm6368_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6368)
+};
+
+const u32 *bcm63xx_reset_bits;
+static int reset_reg;
+
+static int __init bcm63xx_reset_bits_init(void)
+{
+	if (BCMCPU_IS_6328()) {
+		reset_reg = PERF_SOFTRESET_6328_REG;
+		bcm63xx_reset_bits = bcm6328_reset_bits;
+	} else if (BCMCPU_IS_6338()) {
+		reset_reg = PERF_SOFTRESET_REG;
+		bcm63xx_reset_bits = bcm6338_reset_bits;
+	} else if (BCMCPU_IS_6348()) {
+		reset_reg = PERF_SOFTRESET_REG;
+		bcm63xx_reset_bits = bcm6348_reset_bits;
+	} else if (BCMCPU_IS_6358()) {
+		reset_reg = PERF_SOFTRESET_6358_REG;
+		bcm63xx_reset_bits = bcm6358_reset_bits;
+	} else if (BCMCPU_IS_6368()) {
+		reset_reg = PERF_SOFTRESET_6368_REG;
+		bcm63xx_reset_bits = bcm6368_reset_bits;
+	}
+
+	return 0;
+}
+#else
+
+#ifdef CONFIG_BCM63XX_CPU_6328
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6328)
+};
+#define reset_reg PERF_SOFTRESET_6328_REG
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6338
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6338)
+};
+#define reset_reg PERF_SOFTRESET_REG
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6345
+static const u32 bcm63xx_reset_bits[] = { };
+#define reset_reg 0
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6348
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6348)
+};
+#define reset_reg PERF_SOFTRESET_REG
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6358)
+};
+#define reset_reg PERF_SOFTRESET_6358_REG
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6368
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(6368)
+};
+#define reset_reg PERF_SOFTRESET_6368_REG
+#endif
+
+static int __init bcm63xx_reset_bits_init(void) { return 0; }
+#endif
+
+static DEFINE_SPINLOCK(reset_mutex);
+
+static void __bcm63xx_core_set_reset(u32 mask, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!mask)
+		return;
+
+	spin_lock_irqsave(&reset_mutex, flags);
+	val = bcm_perf_readl(reset_reg);
+
+	if (enable)
+		val &= ~mask;
+	else
+		val |= mask;
+
+	bcm_perf_writel(val, reset_reg);
+	spin_unlock_irqrestore(&reset_mutex, flags);
+}
+
+void bcm63xx_core_set_reset(enum bcm63xx_core_reset core, int reset)
+{
+	__bcm63xx_core_set_reset(bcm63xx_reset_bits[core], reset);
+}
+EXPORT_SYMBOL(bcm63xx_core_set_reset);
+
+postcore_initcall(bcm63xx_reset_bits_init);

arch/mips/cavium-octeon/executive/cvmx-bootmem.c

@@ -688,3 +688,8 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
 		cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock));
 	return addr_allocated;
 }
+
+struct cvmx_bootmem_desc *cvmx_bootmem_get_desc(void)
+{
+	return cvmx_bootmem_desc;
+}

arch/mips/cavium-octeon/flash_setup.c

@@ -51,7 +51,8 @@ static int __init flash_init(void)
 		flash_map.name = "phys_mapped_flash";
 		flash_map.phys = region_cfg.s.base << 16;
 		flash_map.size = 0x1fc00000 - flash_map.phys;
-		flash_map.bankwidth = 1;
+		/* 8-bit bus (0 + 1) or 16-bit bus (1 + 1) */
+		flash_map.bankwidth = region_cfg.s.width + 1;
 		flash_map.virt = ioremap(flash_map.phys, flash_map.size);
 		pr_notice("Bootbus flash: Setting flash for %luMB flash at "
 			  "0x%08llx\n", flash_map.size >> 20, flash_map.phys);

arch/mips/cavium-octeon/octeon-irq.c

@@ -1266,7 +1266,6 @@ static void __init octeon_irq_init_ciu(void)
 		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52);
 
 	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56);
-	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63);
 
 	/* CIU_1 */
 	for (i = 0; i < 16; i++)

arch/mips/cavium-octeon/octeon-memcpy.S

@@ -79,11 +79,6 @@
 /*
  * Only on the 64-bit kernel we can made use of 64-bit registers.
  */
-#ifdef CONFIG_64BIT
-#define USE_DOUBLE
-#endif
-
-#ifdef USE_DOUBLE
 
 #define LOAD   ld
 #define LOADL  ldl
@@ -119,26 +114,6 @@
 #define t6	$14
 #define t7	$15
 
-#else
-
-#define LOAD   lw
-#define LOADL  lwl
-#define LOADR  lwr
-#define STOREL swl
-#define STORER swr
-#define STORE  sw
-#define ADD    addu
-#define SUB    subu
-#define SRL    srl
-#define SLL    sll
-#define SRA    sra
-#define SLLV   sllv
-#define SRLV   srlv
-#define NBYTES 4
-#define LOG_NBYTES 2
-
-#endif /* USE_DOUBLE */
-
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 #define LDFIRST LOADR
 #define LDREST  LOADL
@@ -395,12 +370,10 @@ EXC(	 sb	t0, N(dst), s_exc_p1)
 
 	COPY_BYTE(0)
 	COPY_BYTE(1)
-#ifdef USE_DOUBLE
 	COPY_BYTE(2)
 	COPY_BYTE(3)
 	COPY_BYTE(4)
 	COPY_BYTE(5)
-#endif
 EXC(	lb	t0, NBYTES-2(src), l_exc)
 	SUB	len, len, 1
 	jr	ra