Merge branch 'next' into resolution

Conflicts: drivers/extcon/extcon-adc-jack.c drivers/extcon/extcon-arizona.c drivers/extcon/extcon-gpio.c include/linux/extcon.h
2026-05-01 15:00:59 -07:00 · 2016-09-15 15:46:11 +05:30
parent 8152263748 b78ea84a7d
commit cb9850d092
28 changed files with 2877 additions and 148 deletions
@@ -0,0 +1,23 @@
+Driver for Broadcom Northstar USB 3.0 PHY
+
+Required properties:
+
+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
+       MMI.
+- reg-names: "dmp" and "ccb-mii"
+
+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+three known series: Ax, Bx and Cx.
+Known A0: BCM4707 rev 0
+Known B0: BCM4707 rev 4, BCM53573 rev 2
+Known B1: BCM4707 rev 6
+Known C0: BCM47094 rev 0
+
+Example:
+	usb3-phy {
+		compatible = "brcm,ns-ax-usb3-phy";
+		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+		reg-names = "dmp", "ccb-mii";
+		#phy-cells = <0>;
+	};
@@ -0,0 +1,64 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+	* "rockchip,rk3366-usb2phy"
+	* "rockchip,rk3399-usb2phy"
+ - reg : the address offset of grf for usb-phy configuration.
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify host or otg port,
+		 and shall be the following entries:
+	* "otg-port" : the name of otg port.
+	* "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+	* "otg-id" : for the otg id interrupt.
+	* "otg-bvalid" : for the otg vbus interrupt.
+	* "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+		See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	u2phy: usb2-phy@700 {
+		compatible = "rockchip,rk3366-usb2phy";
+		reg = <0x700 0x2c>;
+		#clock-cells = <0>;
+		clock-output-names = "sclk_otgphy0_480m";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg-id", "otg-bvalid", "linestate";
+			status = "okay";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "okay";
+		};
+	};
+};
@@ -0,0 +1,101 @@
+* ROCKCHIP type-c PHY
+---------------------
+
+Required properties:
+ - compatible : must be "rockchip,rk3399-typec-phy"
+ - reg: Address and length of the usb phy control register set
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
+ - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
+		    <&cru SCLK_UPHY1_TCPDCORE>;
+ - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
+ - resets : a list of phandle + reset specifier pairs
+ - reset-names : string reset name, must be:
+		 "uphy", "uphy-pipe", "uphy-tcphy"
+ - extcon : extcon specifier for the Power Delivery
+
+Note, there are 2 type-c phys for RK3399, and they are almost identical, except
+these registers(description below), every register node contains 3 sections:
+offset, enable bit, write mask bit.
+ - rockchip,typec-conn-dir : the register of type-c connector direction,
+   for type-c phy0, it must be <0xe580 0 16>;
+   for type-c phy1, it must be <0xe58c 0 16>;
+ - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
+   control.
+   for type-c phy0, it must be <0xe580 3 19>;
+   for type-c phy1, it must be <0xe58c 3 19>;
+ - rockchip,external-psm : the register of type-c phy external psm clock
+   selection.
+   for type-c phy0, it must be <0xe588 14 30>;
+   for type-c phy1, it must be <0xe594 14 30>;
+ - rockchip,pipe-status : the register of type-c phy pipe status.
+   for type-c phy0, it must be <0xe5c0 0 0>;
+   for type-c phy1, it must be <0xe5c0 16 16>;
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify dp or usb3 port,
+		 and shall be the following entries:
+	* "dp-port" : the name of DP port.
+	* "usb3-port" : the name of USB3 port.
+
+Required properties (port (child) node):
+- #phy-cells : must be 0, See ./phy-bindings.txt for details.
+
+Example:
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb0>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb1>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
@@ -5,6 +5,8 @@ This file provides information on what the device node for the R-Car generation

 Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
+	      SoC.
+	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
 	      SoC.
 	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.

@@ -30,11 +32,11 @@ Example (R-Car H3):
 		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee080200 0 0x700>;
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+		clocks = <&cpg CPG_MOD 703>;
 	};

 	usb-phy@ee0a0200 {
 		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+		clocks = <&cpg CPG_MOD 702>;
 	};
@@ -0,0 +1,31 @@
+Rockchip PCIE PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-pcie-phy
+ - #phy-cells: must be 0
+ - clocks: Must contain an entry in clock-names.
+	See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "refclk"
+ - resets: Must contain an entry in reset-names.
+	See ../reset/reset.txt for details.
+ - reset-names: Must be "phy"
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	...
+
+	pcie_phy: pcie-phy {
+		compatible = "rockchip,rk3399-pcie-phy";
+		#phy-cells = <0>;
+		clocks = <&cru SCLK_PCIEPHY_REF>;
+		clock-names = "refclk";
+		resets = <&cru SRST_PCIEPHY>;
+		reset-names = "phy";
+	};
+};
@@ -27,6 +27,9 @@ Optional Properties:
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names: string, clock name, must be "phyclk"
 - #clock-cells: for users of the phy-pll, should be 0
+- reset-names: Only allow the following entries:
+ - phy-reset
+- resets: Must contain an entry for each entry in reset-names.

 Example:

@@ -10,6 +10,7 @@ Required properties:
  * allwinner,sun8i-a23-usb-phy
  * allwinner,sun8i-a33-usb-phy
  * allwinner,sun8i-h3-usb-phy
+  * allwinner,sun50i-a64-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
  * "phy_ctrl"
@@ -31,6 +31,8 @@ OMAP USB2 PHY

 Required properties:
 - compatible: Should be "ti,omap-usb2"
+	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
+	       DRA7x
 	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
 	       in DRA7x
 - reg : Address and length of the register set for the device.
@@ -49,6 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
+
 	extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
 }

@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
 	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
 	  controller on Northstar family.

+config PHY_BCM_NS_USB3
+	tristate "Broadcom Northstar USB 3.0 PHY Driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
+	  controller on Northstar family.
+
 config PHY_BERLIN_USB
 	tristate "Marvell Berlin USB PHY Driver"
 	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
@@ -258,7 +267,9 @@ config PHY_SUN4I_USB
 	depends on RESET_CONTROLLER
 	depends on EXTCON
 	depends on POWER_SUPPLY
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_COMMON
 	help
 	  Enable this to support the transceiver that is part of Allwinner
 	  sunxi SoCs.
@@ -358,6 +369,14 @@ config PHY_ROCKCHIP_USB
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.

+config PHY_ROCKCHIP_INNO_USB2
+	tristate "Rockchip INNO USB2PHY Driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	help
+	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
 config PHY_ROCKCHIP_EMMC
 	tristate "Rockchip EMMC PHY Driver"
 	depends on ARCH_ROCKCHIP && OF
@@ -372,6 +391,23 @@ config PHY_ROCKCHIP_DP
 	help
 	  Enable this to support the Rockchip Display Port PHY.

+config PHY_ROCKCHIP_PCIE
+	tristate "Rockchip PCIe PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select EXTCON
+	select GENERIC_PHY
+	select RESET_CONTROLLER
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
@@ -4,6 +4,7 @@

 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_BCM_NS_USB2)		+= phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3)		+= phy-bcm-ns-usb3.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
@@ -39,8 +40,11 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
@@ -0,0 +1,274 @@
+/*
+ * Broadcom Northstar USB 3.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * All magic values used for initialization (and related comments) were obtained
+ * from Broadcom's SDK:
+ * Copyright (c) Broadcom Corp, 2012
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US	1000	/* usecs */
+
+enum bcm_ns_family {
+	BCM_NS_UNKNOWN,
+	BCM_NS_AX,
+	BCM_NS_BX,
+};
+
+struct bcm_ns_usb3 {
+	struct device *dev;
+	enum bcm_ns_family family;
+	void __iomem *dmp;
+	void __iomem *ccb_mii;
+	struct phy *phy;
+};
+
+static const struct of_device_id bcm_ns_usb3_id_table[] = {
+	{
+		.compatible = "brcm,ns-ax-usb3-phy",
+		.data = (int *)BCM_NS_AX,
+	},
+	{
+		.compatible = "brcm,ns-bx-usb3-phy",
+		.data = (int *)BCM_NS_BX,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
+
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
+				u32 mask, u32 value, unsigned long timeout)
+{
+	unsigned long deadline = jiffies + timeout;
+	u32 val;
+
+	do {
+		val = readl(addr);
+		if ((val & mask) == value)
+			return 0;
+		cpu_relax();
+		udelay(10);
+	} while (!time_after_eq(jiffies, deadline));
+
+	dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
+
+	return -EBUSY;
+}
+
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
+{
+	return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
+				    0x0100, 0x0000,
+				    usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+}
+
+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
+{
+	int err;
+
+	err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
+	if (err < 0) {
+		dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
+		return err;
+	}
+
+	writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
+{
+	int err;
+
+	/* Enable MDIO. Setting MDCDIV as 26  */
+	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+	/* Wait for MDIO? */
+	udelay(2);
+
+	/* USB3 PLL Block */
+	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	if (err < 0)
+		return err;
+
+	/* Assert Ana_Pllseq start */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
+
+	/* Assert CML Divider ratio to 26 */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+	/* Asserting PLL Reset */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
+
+	/* Deaaserting PLL Reset */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	/* Deasserting USB3 system reset */
+	writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+	/* PLL frequency monitor enable */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
+
+	/* PIPE Block */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
+
+	/* CMPMAX & CMPMINTH setting */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
+
+	/* DEGLITCH MIN & MAX setting */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
+
+	/* TXPMD block */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+	/* Enabling SSC */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
+{
+	int err;
+
+	/* Enable MDIO. Setting MDCDIV as 26  */
+	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+	/* Wait for MDIO? */
+	udelay(2);
+
+	/* PLL30 block */
+	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	if (err < 0)
+		return err;
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
+
+	/* Enable SSC */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	/* Deasserting USB3 system reset */
+	writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init(struct phy *phy)
+{
+	struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
+	int err;
+
+	/* Perform USB3 system soft reset */
+	writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
+
+	switch (usb3->family) {
+	case BCM_NS_AX:
+		err = bcm_ns_usb3_phy_init_ns_ax(usb3);
+		break;
+	case BCM_NS_BX:
+		err = bcm_ns_usb3_phy_init_ns_bx(usb3);
+		break;
+	default:
+		WARN_ON(1);
+		err = -ENOTSUPP;
+	}
+
+	return err;
+}
+
+static const struct phy_ops ops = {
+	.init		= bcm_ns_usb3_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int bcm_ns_usb3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct bcm_ns_usb3 *usb3;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+
+	usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return -ENOMEM;
+
+	usb3->dev = dev;
+
+	of_id = of_match_device(bcm_ns_usb3_id_table, dev);
+	if (!of_id)
+		return -EINVAL;
+	usb3->family = (enum bcm_ns_family)of_id->data;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
+	usb3->dmp = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb3->dmp)) {
+		dev_err(dev, "Failed to map DMP regs\n");
+		return PTR_ERR(usb3->dmp);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
+	usb3->ccb_mii = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb3->ccb_mii)) {
+		dev_err(dev, "Failed to map ChipCommon B MII regs\n");
+		return PTR_ERR(usb3->ccb_mii);
+	}
+
+	usb3->phy = devm_phy_create(dev, NULL, &ops);
+	if (IS_ERR(usb3->phy)) {
+		dev_err(dev, "Failed to create PHY\n");
+		return PTR_ERR(usb3->phy);
+	}
+
+	phy_set_drvdata(usb3->phy, usb3);
+	platform_set_drvdata(pdev, usb3);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (!IS_ERR(phy_provider))
+		dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_ns_usb3_driver = {
+	.probe		= bcm_ns_usb3_probe,
+	.driver = {
+		.name = "bcm_ns_usb3",
+		.of_match_table = bcm_ns_usb3_id_table,
+	},
+};
+module_platform_driver(bcm_ns_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
@@ -18,11 +18,6 @@
 #include <linux/phy.h>
 #include <linux/phy/phy.h>

-struct ns2_pci_phy {
-	struct mdio_device *mdiodev;
-	struct phy *phy;
-};
-
 #define BLK_ADDR_REG_OFFSET	0x1f
 #define PLL_AFE1_100MHZ_BLK	0x2100
 #define PLL_CLK_AMP_OFFSET	0x03
@@ -30,17 +25,17 @@ struct ns2_pci_phy {

 static int ns2_pci_phy_init(struct phy *p)
 {
-	struct ns2_pci_phy *phy = phy_get_drvdata(p);
+	struct mdio_device *mdiodev = phy_get_drvdata(p);
 	int rc;

 	/* select the AFE 100MHz block page */
-	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
 			   BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
 	if (rc)
 		goto err;

 	/* set the 100 MHz reference clock amplitude to 2.05 v */
-	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
 			   PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
 	if (rc)
 		goto err;
@@ -48,19 +43,19 @@ static int ns2_pci_phy_init(struct phy *p)
 	return 0;

 err:
-	dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
+	dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
 	return rc;
 }

-static struct phy_ops ns2_pci_phy_ops = {
+static const struct phy_ops ns2_pci_phy_ops = {
 	.init = ns2_pci_phy_init,
+	.owner = THIS_MODULE,
 };

 static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
 {
 	struct device *dev = &mdiodev->dev;
 	struct phy_provider *provider;
-	struct ns2_pci_phy *p;
 	struct phy *phy;

 	phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
@@ -69,16 +64,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
 		return PTR_ERR(phy);
 	}

-	p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
-			 GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	p->mdiodev = mdiodev;
-	dev_set_drvdata(dev, p);
-
-	p->phy = phy;
-	phy_set_drvdata(phy, p);
+	phy_set_drvdata(phy, mdiodev);

 	provider = devm_of_phy_provider_register(&phy->dev,
 						 of_phy_simple_xlate);
@@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
 }
 EXPORT_SYMBOL_GPL(phy_set_mode);

+int phy_reset(struct phy *phy)
+{
+	int ret;
+
+	if (!phy || !phy->ops->reset)
+		return 0;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->reset(phy);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_reset);
+
 /**
 * _of_phy_get() - lookup and obtain a reference to a phy by phandle
 * @np: device_node for which to get the phy
@@ -154,7 +154,7 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 		d_phy->regmap = syscon_regmap_lookup_by_compatible(
 							"ti,da830-cfgchip");
 	else
-		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
 	if (IS_ERR(d_phy->regmap)) {
 		dev_err(dev, "Failed to get syscon\n");
 		return PTR_ERR(d_phy->regmap);
@@ -249,7 +249,7 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
 static unsigned int
 exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 {
-	static u32 reg;
+	u32 reg;
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

 	/* restore any previous reference clock settings */
@@ -295,7 +295,7 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 static unsigned int
 exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
 {
-	static u32 reg;
+	u32 reg;
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

 	/* restore any previous reference clock settings */
@@ -133,11 +133,49 @@ static int omap_usb_power_on(struct phy *x)
 	return omap_usb_phy_power(phy, true);
 }

+static int omap_usb2_disable_clocks(struct omap_usb *phy)
+{
+	clk_disable(phy->wkupclk);
+	if (!IS_ERR(phy->optclk))
+		clk_disable(phy->optclk);
+
+	return 0;
+}
+
+static int omap_usb2_enable_clocks(struct omap_usb *phy)
+{
+	int ret;
+
+	ret = clk_enable(phy->wkupclk);
+	if (ret < 0) {
+		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+		goto err0;
+	}
+
+	if (!IS_ERR(phy->optclk)) {
+		ret = clk_enable(phy->optclk);
+		if (ret < 0) {
+			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+			goto err1;
+		}
+	}
+
+	return 0;
+
+err1:
+	clk_disable(phy->wkupclk);
+
+err0:
+	return ret;
+}
+
 static int omap_usb_init(struct phy *x)
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 	u32 val;

+	omap_usb2_enable_clocks(phy);
+
 	if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
 		/*
 		 *
@@ -155,8 +193,16 @@ static int omap_usb_init(struct phy *x)
 	return 0;
 }

+static int omap_usb_exit(struct phy *x)
+{
+	struct omap_usb *phy = phy_get_drvdata(x);
+
+	return omap_usb2_disable_clocks(phy);
+}
+
 static const struct phy_ops ops = {
 	.init		= omap_usb_init,
+	.exit		= omap_usb_exit,
 	.power_on	= omap_usb_power_on,
 	.power_off	= omap_usb_power_off,
 	.owner		= THIS_MODULE,
@@ -376,65 +422,11 @@ static int omap_usb2_remove(struct platform_device *pdev)
 	return 0;
 }

-#ifdef CONFIG_PM
-
-static int omap_usb2_runtime_suspend(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-
-	clk_disable(phy->wkupclk);
-	if (!IS_ERR(phy->optclk))
-		clk_disable(phy->optclk);
-
-	return 0;
-}
-
-static int omap_usb2_runtime_resume(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = clk_enable(phy->wkupclk);
-	if (ret < 0) {
-		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
-		goto err0;
-	}
-
-	if (!IS_ERR(phy->optclk)) {
-		ret = clk_enable(phy->optclk);
-		if (ret < 0) {
-			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
-			goto err1;
-		}
-	}
-
-	return 0;
-
-err1:
-	clk_disable(phy->wkupclk);
-
-err0:
-	return ret;
-}
-
-static const struct dev_pm_ops omap_usb2_pm_ops = {
-	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
-		NULL)
-};
-
-#define DEV_PM_OPS     (&omap_usb2_pm_ops)
-#else
-#define DEV_PM_OPS     NULL
-#endif
-
 static struct platform_driver omap_usb2_driver = {
 	.probe		= omap_usb2_probe,
 	.remove		= omap_usb2_remove,
 	.driver		= {
 		.name	= "omap-usb2",
-		.pm	= DEV_PM_OPS,
 		.of_match_table = omap_usb2_id_table,
 	},
 };
@@ -283,10 +283,8 @@ static int __ufs_qcom_phy_init_vreg(struct phy *phy,
 			err = 0;
 		}
 		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
-		if (of_get_property(dev->of_node, prop_name, NULL))
-			vreg->is_always_on = true;
-		else
-			vreg->is_always_on = false;
+		vreg->is_always_on = of_property_read_bool(dev->of_node,
+							   prop_name);
 	}

 	if (!strcmp(name, "vdda-pll")) {
@@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)

 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{ .compatible = "renesas,usb2-phy-r8a7795" },
+	{ .compatible = "renesas,usb2-phy-r8a7796" },
 	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
 	{ }
 };
--- a/Show More
+++ b/Show More