powerpc/eeh: Cleanup comments in the EEH core

The EEH has been implemented on pSeries platform. The original
code looks a little bit nasty. The patch does cleanup on the
current EEH implementation so that it looks more clean.

        * Duplicated comments have been removed from the corresponding
          header files.
        * Comments have been reorganized so that it looks more clean.
        * The leading comments of functions are adjusted for a little
          bit so that the result of "make pdfdocs" would be more
          unified.
        * Function definitions and calls have unified format as "xxx()".
          That means the format "xxx ()" has been replaced by "xxx()".
        * There're multiple functions implemented for resetting PE. The
          position of those functions have been move around so that they
          are adjacent to each other to reflect their relationship.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/include/asm/eeh.h

@@ -1,6 +1,6 @@
 /*
- * eeh.h
  * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
+ * Copyright 2001-2012 IBM Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -40,8 +40,10 @@ extern int eeh_subsystem_enabled;
 #define EEH_MODE_RECOVERING    (1<<3)
 #define EEH_MODE_IRQ_DISABLED  (1<<4)
 
-/* Max number of EEH freezes allowed before we consider the device
- * to be permanently disabled. */
+/*
+ * Max number of EEH freezes allowed before we consider the device
+ * to be permanently disabled.
+ */
 #define EEH_MAX_ALLOWED_FREEZES 5
 
 void __init eeh_init(void);
@@ -49,26 +51,8 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
 				unsigned long val);
 int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
 void __init pci_addr_cache_build(void);
-
-/**
- * eeh_add_device_early
- * eeh_add_device_late
- *
- * Perform eeh initialization for devices added after boot.
- * Call eeh_add_device_early before doing any i/o to the
- * device (including config space i/o).  Call eeh_add_device_late
- * to finish the eeh setup for this device.
- */
 void eeh_add_device_tree_early(struct device_node *);
 void eeh_add_device_tree_late(struct pci_bus *);
-
-/**
- * eeh_remove_device_recursive - undo EEH for device & children.
- * @dev: pci device to be removed
- *
- * As above, this removes the device; it also removes child
- * pci devices as well.
- */
 void eeh_remove_bus_device(struct pci_dev *);
 
 /**

arch/powerpc/include/asm/ppc-pci.h

@@ -47,92 +47,27 @@ extern int rtas_setup_phb(struct pci_controller *phb);
 
 extern unsigned long pci_probe_only;
 
-/* ---- EEH internal-use-only related routines ---- */
 #ifdef CONFIG_EEH
 
 void pci_addr_cache_insert_device(struct pci_dev *dev);
 void pci_addr_cache_remove_device(struct pci_dev *dev);
 void pci_addr_cache_build(void);
 struct pci_dev *pci_get_device_by_addr(unsigned long addr);
-
-/**
- * eeh_slot_error_detail -- record and EEH error condition to the log
- * @pdn:      pci device node
- * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
- *
- * Obtains the EEH error details from the RTAS subsystem,
- * and then logs these details with the RTAS error log system.
- */
 #define EEH_LOG_TEMP_FAILURE 1
 #define EEH_LOG_PERM_FAILURE 2
 void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
-
-/**
- * rtas_pci_enable - enable IO transfers for this slot
- * @pdn:       pci device node
- * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
- *
- * Enable I/O transfers to this slot 
- */
 #define EEH_THAW_MMIO 2
 #define EEH_THAW_DMA  3
 int rtas_pci_enable(struct pci_dn *pdn, int function);
-
-/**
- * rtas_set_slot_reset -- unfreeze a frozen slot
- * @pdn:       pci device node
- *
- * Clear the EEH-frozen condition on a slot.  This routine
- * does this by asserting the PCI #RST line for 1/8th of
- * a second; this routine will sleep while the adapter is
- * being reset.
- *
- * Returns a non-zero value if the reset failed.
- */
 int rtas_set_slot_reset (struct pci_dn *);
 int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
-
-/** 
- * eeh_restore_bars - Restore device configuration info.
- * @pdn:       pci device node
- *
- * A reset of a PCI device will clear out its config space.
- * This routines will restore the config space for this
- * device, and is children, to values previously obtained
- * from the firmware.
- */
 void eeh_restore_bars(struct pci_dn *);
-
-/**
- * rtas_configure_bridge -- firmware initialization of pci bridge
- * @pdn:       pci device node
- *
- * Ask the firmware to configure all PCI bridges devices
- * located behind the indicated node. Required after a
- * pci device reset. Does essentially the same hing as
- * eeh_restore_bars, but for brdges, and lets firmware 
- * do the work.
- */
 void rtas_configure_bridge(struct pci_dn *);
-
 int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
 int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
-
-/**
- * eeh_mark_slot -- set mode flags for pertition endpoint
- * @pdn:       pci device node
- *
- * mark and clear slots: find "partition endpoint" PE and set or 
- * clear the flags for each subnode of the PE.
- */
-void eeh_mark_slot (struct device_node *dn, int mode_flag);
-void eeh_clear_slot (struct device_node *dn, int mode_flag);
-
-/**
- * find_device_pe -- Find the associated "Partiationable Endpoint" PE
- * @pdn:       pci device node
- */
-struct device_node * find_device_pe(struct device_node *dn);
+void eeh_mark_slot(struct device_node *dn, int mode_flag);
+void eeh_clear_slot(struct device_node *dn, int mode_flag);
+struct device_node *find_device_pe(struct device_node *dn);
 
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);