Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Olof Johansson:
 "Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
  of smaller changes, but also some new platforms that are worth
  mentioning:

   - Rockchip RK3399 platforms for Chromebooks, including Samsung
     Chromebook Plus (Kevin)

   - Orange Pi PC2 (Allwinner H5)

   - Freescale LS2088A and LS1088A SoCs

   - Expanded support for Nvidia Tegra186 (and Jetson TX2)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
  arm64: dts: Add basic DT to support Spreadtrum's SP9860G
  arm64: dts: exynos: Use - instead of @ for DT OPP entries
  arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
  arm64: dts: juno: add information about L1 and L2 caches
  arm64: dts: juno: fix few unit address format warnings
  arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
  arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
  arm64: marvell: dts: add crypto engine description for 7k/8k
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
  arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
  arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
  arm64: dts: hisi: add SAS nodes for the hip07 SoC
  arm64: dts: hisi: add RoCE nodes for the hip07 SoC
  arm64: dts: hisi: add network related nodes for the hip07 SoC
  arm64: dts: hisi: add mbigen nodes for the hip07 SoC
  arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
  arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
  dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
  ...

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -43,8 +43,11 @@ Board compatible values:
   - "wetek,hub" (Meson gxbb)
   - "wetek,play2" (Meson gxbb)
   - "amlogic,p212" (Meson gxl s905x)
+  - "khadas,vim" (Meson gxl s905x)
+
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
   - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)

Documentation/devicetree/bindings/arm/cavium-thunder2.txt

@@ -0,0 +1,8 @@
+Cavium ThunderX2 CN99XX platform tree bindings
+----------------------------------------------
+
+Boards with Cavium ThunderX2 CN99XX SoC shall have the root property:
+  compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+
+These SoC uses the "cavium,thunder2" core which will be compatible
+with "brcm,vulcan".

Documentation/devicetree/bindings/arm/cpus.txt

@@ -170,6 +170,7 @@ nodes to be present and contain the properties described below.
 			    "brcm,brahma-b15"
 			    "brcm,vulcan"
 			    "cavium,thunder"
+			    "cavium,thunder2"
 			    "faraday,fa526"
 			    "intel,sa110"
 			    "intel,sa1100"

Documentation/devicetree/bindings/arm/fsl.txt

@@ -179,6 +179,18 @@ LS1046A ARMv8 based RDB Board
 Required root node properties:
     - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
 
+LS1088A SoC
+Required root node properties:
+    - compatible = "fsl,ls1088a";
+
+LS1088A ARMv8 based QDS Board
+Required root node properties:
+    - compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+
+LS1088A ARMv8 based RDB Board
+Required root node properties:
+    - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+
 LS2080A SoC
 Required root node properties:
     - compatible = "fsl,ls2080a";
@@ -195,3 +207,14 @@ LS2080A ARMv8 based RDB Board
 Required root node properties:
     - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
 
+LS2088A SoC
+Required root node properties:
+    - compatible = "fsl,ls2088a";
+
+LS2088A ARMv8 based QDS Board
+Required root node properties:
+    - compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+LS2088A ARMv8 based RDB Board
+Required root node properties:
+    - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -4,6 +4,14 @@ Hi3660 SoC
 Required root node properties:
 	- compatible = "hisilicon,hi3660";
 
+Hi3798cv200 SoC
+Required root node properties:
+	- compatible = "hisilicon,hi3798cv200";
+
+Hi3798cv200 Poplar Board
+Required root node properties:
+	- compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
 Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -59,6 +59,17 @@ Rockchip platforms device tree bindings
       - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
 		     "google,veyron", "rockchip,rk3288";
 
+- Google Gru (dev-board):
+    Required root node properties:
+      - compatible = "google,gru-rev15", "google,gru-rev14",
+		     "google,gru-rev13", "google,gru-rev12",
+		     "google,gru-rev11", "google,gru-rev10",
+		     "google,gru-rev9", "google,gru-rev8",
+		     "google,gru-rev7", "google,gru-rev6",
+		     "google,gru-rev5", "google,gru-rev4",
+		     "google,gru-rev3", "google,gru-rev2",
+		     "google,gru", "rockchip,rk3399";
+
 - Google Jaq (Haier Chromebook 11 and more):
     Required root node properties:
       - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
@@ -73,6 +84,15 @@ Rockchip platforms device tree bindings
 		     "google,veyron-jerry-rev3", "google,veyron-jerry",
 		     "google,veyron", "rockchip,rk3288";
 
+- Google Kevin (Samsung Chromebook Plus):
+    Required root node properties:
+      - compatible = "google,kevin-rev15", "google,kevin-rev14",
+		     "google,kevin-rev13", "google,kevin-rev12",
+		     "google,kevin-rev11", "google,kevin-rev10",
+		     "google,kevin-rev9", "google,kevin-rev8",
+		     "google,kevin-rev7", "google,kevin-rev6",
+		     "google,kevin", "google,gru", "rockchip,rk3399";
+
 - Google Mickey (Asus Chromebit CS10):
     Required root node properties:
       - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
@@ -141,6 +161,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
      - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
 
+- Rockchip RK3328 evb:
+    Required root node properties:
+      - compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
 - Rockchip RK3399 evb:
     Required root node properties:
       - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -5,7 +5,8 @@ controllers within the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-clkc"
+- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
+	      or "amlogic,gxl-clkc" for GXL and GXM SoC.
 - reg: physical base address of the clock controller and length of memory
        mapped region.
 

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -35,6 +35,7 @@ Required properties:
 	* "fsl,ls1021a-clockgen"
 	* "fsl,ls1043a-clockgen"
 	* "fsl,ls1046a-clockgen"
+	* "fsl,ls1088a-clockgen"
 	* "fsl,ls2080a-clockgen"
 	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks

Documentation/devicetree/bindings/soc/rockchip/grf.txt

@@ -18,6 +18,7 @@ Required Properties:
    - "rockchip,rk3188-grf", "syscon": for rk3188
    - "rockchip,rk3228-grf", "syscon": for rk3228
    - "rockchip,rk3288-grf", "syscon": for rk3288
+   - "rockchip,rk3328-grf", "syscon": for rk3328
    - "rockchip,rk3368-grf", "syscon": for rk3368
    - "rockchip,rk3399-grf", "syscon": for rk3399
 - compatible: PMUGRF should be one of the following:

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -139,6 +139,7 @@ holt	Holt Integrated Circuits, Inc.
 honeywell	Honeywell
 hp	Hewlett Packard
 holtek	Holtek Semiconductor, Inc.
+hwacom	HwaCom Systems Inc.
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -162,6 +163,7 @@ jedec	JEDEC Solid State Technology Association
 karo	Ka-Ro electronics GmbH
 keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
+khadas	Khadas
 kinetic Kinetic Technologies
 kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation

arch/arm/boot/dts/meson8.dtsi

@@ -106,6 +106,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
 		};
 
 		spi_nor_pins: nor {
@@ -148,6 +149,7 @@
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 120 16>;
 		};
 
 		uart_ao_a_pins: uart_ao_a {

arch/arm/boot/dts/meson8b.dtsi

@@ -198,6 +198,7 @@
 				reg-names = "mux", "pull", "pull-enable", "gpio";
 				gpio-controller;
 				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl_cbus 0 0 130>;
 			};
 		};
 
@@ -215,6 +216,7 @@
 				reg-names = "mux", "pull", "gpio";
 				gpio-controller;
 				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl_aobus 0 130 16>;
 			};
 
 			uart_ao_a_pins: uart_ao_a {

arch/arm/boot/dts/sunxi-h3-h5.dtsi

@@ -68,31 +68,12 @@
 			clock-output-names = "osc32k";
 		};
 
-		apb0: apb0_clk {
-			compatible = "fixed-factor-clock";
+		iosc: internal-osc-clk {
 			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&osc24M>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01f01428 {
-			compatible = "allwinner,sun8i-h3-apb0-gates-clk",
-				     "allwinner,sun4i-a10-gates-clk";
-			reg = <0x01f01428 0x4>;
-			#clock-cells = <1>;
-			clocks = <&apb0>;
-			clock-indices = <0>, <1>;
-			clock-output-names = "apb0_pio", "apb0_ir";
-		};
-
-		ir_clk: ir_clk@01f01454 {
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01f01454 0x4>;
-			#clock-cells = <0>;
-			clocks = <&osc32k>, <&osc24M>;
-			clock-output-names = "ir";
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-accuracy = <300000000>;
+			clock-output-names = "iosc";
 		};
 	};
 
@@ -576,9 +557,12 @@
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		apb0_reset: reset@01f014b0 {
-			reg = <0x01f014b0 0x4>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun50i-a64-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
@@ -589,9 +573,9 @@
 
 		ir: ir@01f02000 {
 			compatible = "allwinner,sun5i-a13-ir";
-			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clocks = <&r_ccu 4>, <&r_ccu 11>;
 			clock-names = "apb", "ir";
-			resets = <&apb0_reset 1>;
+			resets = <&r_ccu 0>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01f02000 0x40>;
 			status = "disabled";
@@ -601,9 +585,8 @@
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_reset 0>;
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;

arch/arm64/boot/dts/allwinner/Makefile

@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -98,6 +98,14 @@
 		clock-output-names = "osc32k";
 	};
 
+	iosc: internal-osc-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-accuracy = <300000000>;
+		clock-output-names = "iosc";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -394,5 +402,26 @@
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun50i-a64-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun50i-a64-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
 	};
 };

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts

@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi PC 2";
+	compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r-gpio-keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi

@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun50i-h5-emmc",
+		     "allwinner,sun50i-a64-emmc";
+	clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+	clock-names = "ahb", "mmc";
+};
+
+&pio {
+	compatible = "allwinner,sun50i-h5-pinctrl";
+};

arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi

@@ -0,0 +1 @@
+../../../../arm/boot/dts/sunxi-h3-h5.dtsi

arch/arm64/boot/dts/amlogic/Makefile

@@ -7,9 +7,11 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -98,6 +98,27 @@
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -188,3 +209,21 @@
 &ethmac {
 	status = "okay";
 };
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};