You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from Davic Miller:
1) Support busy polling generically, for all NAPI drivers. From Eric
Dumazet.
2) Add byte/packet counter support to nft_ct, from Floriani Westphal.
3) Add RSS/XPS support to mvneta driver, from Gregory Clement.
4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
Frederic Sowa.
5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.
6) Add support for VLAN device bridging to mlxsw switch driver, from
Ido Schimmel.
7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.
8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.
9) Reorganize wireless drivers into per-vendor directories just like we
do for ethernet drivers. From Kalle Valo.
10) Provide a way for administrators "destroy" connected sockets via the
SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti.
11) Add support to add/remove multicast routes via netlink, from Nikolay
Aleksandrov.
12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.
13) Add forwarding and packet duplication facilities to nf_tables, from
Pablo Neira Ayuso.
14) Dead route support in MPLS, from Roopa Prabhu.
15) TSO support for thunderx chips, from Sunil Goutham.
16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.
17) Rationalize, consolidate, and more completely document the checksum
offloading facilities in the networking stack. From Tom Herbert.
18) Support aborting an ongoing scan in mac80211/cfg80211, from
Vidyullatha Kanchanapally.
19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
net: bnxt: always return values from _bnxt_get_max_rings
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
phy: remove an unneeded condition
mdio: remove an unneed condition
mdio_bus: NULL dereference on allocation error
net: Fix typo in netdev_intersect_features
net: freescale: mac-fec: Fix build error from phy_device API change
net: freescale: ucc_geth: Fix build error from phy_device API change
bonding: Prevent IPv6 link local address on enslaved devices
IB/mlx5: Add flow steering support
net/mlx5_core: Export flow steering API
net/mlx5_core: Make ipv4/ipv6 location more clear
net/mlx5_core: Enable flow steering support for the IB driver
net/mlx5_core: Initialize namespaces only when supported by device
net/mlx5_core: Set priority attributes
net/mlx5_core: Connect flow tables
net/mlx5_core: Introduce modify flow table command
net/mlx5_core: Managing root flow table
...
This commit is contained in:
Linus Torvalds
@@ -19,6 +19,25 @@ Description:
|
||||
Set to 0 to pad all frames. Set greater than tx_max to
|
||||
disable all padding.
|
||||
|
||||
What: /sys/class/net/<iface>/cdc_ncm/ndp_to_end
|
||||
Date: Dec 2015
|
||||
KernelVersion: 4.5
|
||||
Contact: Bjørn Mork <bjorn@mork.no>
|
||||
Description:
|
||||
Boolean attribute showing the status of the "NDP to
|
||||
end" quirk. Defaults to 'N', except for devices
|
||||
already known to need it enabled.
|
||||
|
||||
The "NDP to end" quirk makes the driver place the NDP
|
||||
(the packet index table) after the payload. The NCM
|
||||
specification does not mandate this, but some devices
|
||||
are known to be more restrictive. Write 'Y' to this
|
||||
attribute for temporary testing of a suspect device
|
||||
failing to work with the default driver settings.
|
||||
|
||||
A device entry should be added to the driver if this
|
||||
quirk is found to be required.
|
||||
|
||||
What: /sys/class/net/<iface>/cdc_ncm/rx_max
|
||||
Date: May 2014
|
||||
KernelVersion: 3.16
|
||||
|
||||
@@ -8,7 +8,7 @@ Description:
|
||||
|
||||
What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
|
||||
Date: May 2011
|
||||
Contact: Antonio Quartulli <antonio@meshcoding.com>
|
||||
Contact: Antonio Quartulli <a@unstable.cc>
|
||||
Description:
|
||||
Indicates whether the data traffic going from a
|
||||
wireless client to another wireless client will be
|
||||
@@ -70,7 +70,7 @@ Description:
|
||||
|
||||
What: /sys/class/net/<mesh_iface>/mesh/isolation_mark
|
||||
Date: Nov 2013
|
||||
Contact: Antonio Quartulli <antonio@meshcoding.com>
|
||||
Contact: Antonio Quartulli <a@unstable.cc>
|
||||
Description:
|
||||
Defines the isolation mark (and its bitmask) which
|
||||
is used to classify clients as "isolated" by the
|
||||
|
||||
@@ -0,0 +1,23 @@
|
||||
What: /sys/class/net/<iface>/qmi/raw_ip
|
||||
Date: Dec 2015
|
||||
KernelVersion: 4.4
|
||||
Contact: Bjørn Mork <bjorn@mork.no>
|
||||
Description:
|
||||
Boolean. Default: 'N'
|
||||
|
||||
Set this to 'Y' to change the network device link
|
||||
framing from '802.3' to 'raw-ip'.
|
||||
|
||||
The netdev will change to reflect the link framing
|
||||
mode. The netdev is an ordinary ethernet device in
|
||||
'802.3' mode, and the driver expects to exchange
|
||||
frames with an ethernet header over the USB link. The
|
||||
netdev is a headerless p-t-p device in 'raw-ip' mode,
|
||||
and the driver expects to echange IPv4 or IPv6 packets
|
||||
without any L2 header over the USB link.
|
||||
|
||||
Userspace is in full control of firmware configuration
|
||||
through the delegation of the QMI protocol. Userspace
|
||||
is responsible for coordination of driver and firmware
|
||||
link framing mode, changing this setting to 'Y' if the
|
||||
firmware is configured for 'raw-ip' mode.
|
||||
@@ -31,6 +31,8 @@ A switch child node has the following optional property:
|
||||
switch. Must be set if the switch can not detect
|
||||
the presence and/or size of a connected EEPROM,
|
||||
otherwise optional.
|
||||
- reset-gpios : phandle and specifier to a gpio line connected to
|
||||
reset pin of the switch chip.
|
||||
|
||||
A switch may have multiple "port" children nodes
|
||||
|
||||
@@ -114,6 +116,7 @@ Example:
|
||||
#size-cells = <0>;
|
||||
reg = <17 1>; /* MDIO address 17, switch 1 in tree */
|
||||
mii-bus = <&mii_bus1>;
|
||||
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||||
|
||||
switch1port0: port@0 {
|
||||
reg = <0>;
|
||||
|
||||
@@ -1,7 +1,12 @@
|
||||
Hisilicon MDIO bus controller
|
||||
|
||||
Properties:
|
||||
- compatible: "hisilicon,mdio","hisilicon,hns-mdio".
|
||||
- compatible: can be one of:
|
||||
"hisilicon,hns-mdio"
|
||||
"hisilicon,mdio"
|
||||
"hisilicon,hns-mdio" is recommended to be used for hip05 and later SOCs,
|
||||
while "hisilicon,mdio" is optional for backwards compatibility only on
|
||||
hip04 Soc.
|
||||
- reg: The base address of the MDIO bus controller register bank.
|
||||
- #address-cells: Must be <1>.
|
||||
- #size-cells: Must be <0>. MDIO addresses have no size component.
|
||||
|
||||
@@ -0,0 +1,18 @@
|
||||
* ADF7242 IEEE 802.15.4 *
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "adi,adf7242"
|
||||
- spi-max-frequency: maximal bus speed (12.5 MHz)
|
||||
- reg: the chipselect index
|
||||
- interrupts: the interrupt generated by the device via pin IRQ1.
|
||||
IRQ_TYPE_LEVEL_HIGH (4) or IRQ_TYPE_EDGE_FALLING (1)
|
||||
|
||||
Example:
|
||||
|
||||
adf7242@0 {
|
||||
compatible = "adi,adf7242";
|
||||
spi-max-frequency = <10000000>;
|
||||
reg = <0>;
|
||||
interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
};
|
||||
@@ -4,6 +4,7 @@ Required properties:
|
||||
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
|
||||
Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
|
||||
available on sama5d3 SoCs.
|
||||
Use "cdns,np4-macb" for NP4 SoC devices.
|
||||
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
|
||||
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
|
||||
the Cadence GEM, or the generic form: "cdns,gem".
|
||||
@@ -19,6 +20,9 @@ Required properties:
|
||||
Optional elements: 'tx_clk'
|
||||
- clocks: Phandles to input clocks.
|
||||
|
||||
Optional properties for PHY child node:
|
||||
- reset-gpios : Should specify the gpio for phy reset
|
||||
|
||||
Examples:
|
||||
|
||||
macb0: ethernet@fffc4000 {
|
||||
@@ -29,4 +33,8 @@ Examples:
|
||||
local-mac-address = [3a 0e 03 04 05 06];
|
||||
clock-names = "pclk", "hclk", "tx_clk";
|
||||
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
|
||||
ethernet-phy@1 {
|
||||
reg = <0x1>;
|
||||
reset-gpios = <&pioE 6 1>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -1,8 +1,9 @@
|
||||
Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
|
||||
|
||||
Some boards require special tuning values, particularly when it comes to
|
||||
clock delays. You can specify clock delay values by adding
|
||||
micrel-specific properties to an Ethernet OF device node.
|
||||
Some boards require special tuning values, particularly when it comes
|
||||
to clock delays. You can specify clock delay values in the PHY OF
|
||||
device node. Deprecated, but still supported, these properties can
|
||||
also be added to an Ethernet OF device node.
|
||||
|
||||
Note that these settings are applied after any phy-specific fixup from
|
||||
phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
|
||||
@@ -57,16 +58,6 @@ KSZ9031:
|
||||
|
||||
Examples:
|
||||
|
||||
/* Attach to an Ethernet device with autodetected PHY */
|
||||
&enet {
|
||||
rxc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
txen-skew-ps = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Attach to an explicitly-specified PHY */
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 {
|
||||
rxc-skew-ps = <3000>;
|
||||
|
||||
@@ -0,0 +1,50 @@
|
||||
* STMicroelectronics : NFC Transceiver ST95HF
|
||||
|
||||
ST NFC Transceiver is required to attach with SPI bus.
|
||||
ST95HF node should be defined in DT as SPI slave device of SPI
|
||||
master with which ST95HF transceiver is physically connected.
|
||||
The properties defined below are required to be the part of DT
|
||||
to include ST95HF transceiver into the platform.
|
||||
|
||||
Required properties:
|
||||
===================
|
||||
- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus.
|
||||
|
||||
- compatible: should be "st,st95hf" for ST95HF NFC transceiver
|
||||
|
||||
- spi-max-frequency: Max. operating SPI frequency for ST95HF
|
||||
transceiver.
|
||||
|
||||
- enable-gpio: GPIO line to enable ST95HF transceiver.
|
||||
|
||||
- interrupt-parent : Standard way to specify the controller to which
|
||||
ST95HF transceiver's interrupt is routed.
|
||||
|
||||
- interrupts : Standard way to define ST95HF transceiver's out
|
||||
interrupt.
|
||||
|
||||
Optional property:
|
||||
=================
|
||||
- st95hfvin-supply : This is an optional property. It contains a
|
||||
phandle to ST95HF transceiver's regulator supply node in DT.
|
||||
|
||||
Example:
|
||||
=======
|
||||
spi@9840000 {
|
||||
reg = <0x9840000 0x110>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cs-gpios = <&pio0 4>;
|
||||
status = "okay";
|
||||
|
||||
st95hf@0{
|
||||
reg = <0>;
|
||||
compatible = "st,st95hf";
|
||||
status = "okay";
|
||||
spi-max-frequency = <1000000>;
|
||||
enable-gpio = <&pio4 0>;
|
||||
interrupt-parent = <&pio0>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
|
||||
};
|
||||
@@ -5,8 +5,18 @@ interface contains.
|
||||
|
||||
Required properties:
|
||||
- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
|
||||
"renesas,etheravb-r8a7791" if the device is a part of R8A7791 SoC.
|
||||
"renesas,etheravb-r8a7792" if the device is a part of R8A7792 SoC.
|
||||
"renesas,etheravb-r8a7793" if the device is a part of R8A7793 SoC.
|
||||
"renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
|
||||
"renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
|
||||
"renesas,etheravb-rcar-gen2" for generic R-Car Gen 2 compatible interface.
|
||||
"renesas,etheravb-rcar-gen3" for generic R-Car Gen 3 compatible interface.
|
||||
|
||||
When compatible with the generic version, nodes must list the
|
||||
SoC-specific version corresponding to the platform first
|
||||
followed by the generic version.
|
||||
|
||||
- reg: offset and length of (1) the register block and (2) the stream buffer.
|
||||
- interrupts: A list of interrupt-specifiers, one for each entry in
|
||||
interrupt-names.
|
||||
@@ -37,7 +47,7 @@ Optional properties:
|
||||
Example:
|
||||
|
||||
ethernet@e6800000 {
|
||||
compatible = "renesas,etheravb-r8a7795";
|
||||
compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
|
||||
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
||||
@@ -11,6 +11,8 @@ Required properties:
|
||||
designware version numbers documented in stmmac.txt
|
||||
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
|
||||
encompasses the glue register, the register offset, and the register shift.
|
||||
- altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
|
||||
for ptp ref clk. This affects all emacs as the clock is common.
|
||||
|
||||
Optional properties:
|
||||
altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
|
||||
|
||||
@@ -35,18 +35,18 @@ Optional properties:
|
||||
- reset-names: Should contain the reset signal name "stmmaceth", if a
|
||||
reset phandle is given
|
||||
- max-frame-size: See ethernet.txt file in the same directory
|
||||
- clocks: If present, the first clock should be the GMAC main clock and
|
||||
the second clock should be peripheral's register interface clock. Further
|
||||
clocks may be specified in derived bindings.
|
||||
- clock-names: One name for each entry in the clocks property, the
|
||||
first one should be "stmmaceth" and the second one should be "pclk".
|
||||
- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
|
||||
available this clock is used for programming the Timestamp Addend Register.
|
||||
If not passed then the system clock will be used and this is fine on some
|
||||
platforms.
|
||||
- clocks: If present, the first clock should be the GMAC main clock
|
||||
The optional second clock should be peripheral's register interface clock.
|
||||
The third optional clock should be the ptp reference clock.
|
||||
Further clocks may be specified in derived bindings.
|
||||
- clock-names: One name for each entry in the clocks property.
|
||||
The first one should be "stmmaceth".
|
||||
The optional second one should be "pclk".
|
||||
The optional third one should be "clk_ptp_ref".
|
||||
- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
|
||||
- tx-fifo-depth: See ethernet.txt file in the same directory
|
||||
- rx-fifo-depth: See ethernet.txt file in the same directory
|
||||
- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
|
||||
|
||||
Examples:
|
||||
|
||||
@@ -65,4 +65,11 @@ Examples:
|
||||
tx-fifo-depth = <16384>;
|
||||
clocks = <&clock>;
|
||||
clock-names = "stmmaceth";
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy1: ethernet-phy@0 {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -10,6 +10,7 @@ modules that can be used to test the following notifiers.
|
||||
* PM notifier
|
||||
* Memory hotplug notifier
|
||||
* powerpc pSeries reconfig notifier
|
||||
* Netdevice notifier
|
||||
|
||||
CPU notifier error injection module
|
||||
-----------------------------------
|
||||
@@ -87,6 +88,30 @@ Possible pSeries reconfig notifier events to be failed are:
|
||||
* PSERIES_DRCONF_MEM_ADD
|
||||
* PSERIES_DRCONF_MEM_REMOVE
|
||||
|
||||
Netdevice notifier error injection module
|
||||
----------------------------------------------
|
||||
This feature is controlled through debugfs interface
|
||||
/sys/kernel/debug/notifier-error-inject/netdev/actions/<notifier event>/error
|
||||
|
||||
Netdevice notifier events which can be failed are:
|
||||
|
||||
* NETDEV_REGISTER
|
||||
* NETDEV_CHANGEMTU
|
||||
* NETDEV_CHANGENAME
|
||||
* NETDEV_PRE_UP
|
||||
* NETDEV_PRE_TYPE_CHANGE
|
||||
* NETDEV_POST_INIT
|
||||
* NETDEV_PRECHANGEMTU
|
||||
* NETDEV_PRECHANGEUPPER
|
||||
* NETDEV_CHANGEUPPER
|
||||
|
||||
Example: Inject netdevice mtu change error (-22 == -EINVAL)
|
||||
|
||||
# cd /sys/kernel/debug/notifier-error-inject/netdev
|
||||
# echo -22 > actions/NETDEV_CHANGEMTU/error
|
||||
# ip link set eth0 mtu 1024
|
||||
RTNETLINK answers: Invalid argument
|
||||
|
||||
For more usage examples
|
||||
-----------------------
|
||||
There are tools/testing/selftests using the notifier error injection features
|
||||
|
||||
@@ -115,14 +115,17 @@ The "bat0" interface can be used like any other regular inter-
|
||||
face. It needs an IP address which can be either statically con-
|
||||
figured or dynamically (by using DHCP or similar services):
|
||||
|
||||
# NodeA: ifconfig bat0 192.168.0.1
|
||||
# NodeB: ifconfig bat0 192.168.0.2
|
||||
# NodeA: ip link set up dev bat0
|
||||
# NodeA: ip addr add 192.168.0.1/24 dev bat0
|
||||
|
||||
# NodeB: ip link set up dev bat0
|
||||
# NodeB: ip addr add 192.168.0.2/24 dev bat0
|
||||
# NodeB: ping 192.168.0.1
|
||||
|
||||
Note: In order to avoid problems remove all IP addresses previ-
|
||||
ously assigned to interfaces now used by batman advanced, e.g.
|
||||
|
||||
# ifconfig eth0 0.0.0.0
|
||||
# ip addr flush dev eth0
|
||||
|
||||
|
||||
LOGGING/DEBUGGING
|
||||
|
||||
@@ -335,6 +335,14 @@ tcp_keepalive_intvl - INTEGER
|
||||
after probes started. Default value: 75sec i.e. connection
|
||||
will be aborted after ~11 minutes of retries.
|
||||
|
||||
tcp_l3mdev_accept - BOOLEAN
|
||||
Enables child sockets to inherit the L3 master device index.
|
||||
Enabling this option allows a "global" listen socket to work
|
||||
across L3 master domains (e.g., VRFs) with connected sockets
|
||||
derived from the listen socket to be bound to the L3 domain in
|
||||
which the packets originated. Only valid when the kernel was
|
||||
compiled with CONFIG_NET_L3_MASTER_DEV.
|
||||
|
||||
tcp_low_latency - BOOLEAN
|
||||
If set, the TCP stack makes decisions that prefer lower
|
||||
latency as opposed to higher throughput. By default, this
|
||||
@@ -1723,6 +1731,25 @@ addip_enable - BOOLEAN
|
||||
|
||||
Default: 0
|
||||
|
||||
pf_enable - INTEGER
|
||||
Enable or disable pf (pf is short for potentially failed) state. A value
|
||||
of pf_retrans > path_max_retrans also disables pf state. That is, one of
|
||||
both pf_enable and pf_retrans > path_max_retrans can disable pf state.
|
||||
Since pf_retrans and path_max_retrans can be changed by userspace
|
||||
application, sometimes user expects to disable pf state by the value of
|
||||
pf_retrans > path_max_retrans, but occasionally the value of pf_retrans
|
||||
or path_max_retrans is changed by the user application, this pf state is
|
||||
enabled. As such, it is necessary to add this to dynamically enable
|
||||
and disable pf state. See:
|
||||
https://datatracker.ietf.org/doc/draft-ietf-tsvwg-sctp-failover for
|
||||
details.
|
||||
|
||||
1: Enable pf.
|
||||
|
||||
0: Disable pf.
|
||||
|
||||
Default: 1
|
||||
|
||||
addip_noauth_enable - BOOLEAN
|
||||
Dynamic Address Reconfiguration (ADD-IP) requires the use of
|
||||
authentication to protect the operations of adding or removing new
|
||||
@@ -1799,7 +1826,9 @@ pf_retrans - INTEGER
|
||||
having to reduce path_max_retrans to a very low value. See:
|
||||
http://www.ietf.org/id/draft-nishida-tsvwg-sctp-failover-05.txt
|
||||
for details. Note also that a value of pf_retrans > path_max_retrans
|
||||
disables this feature
|
||||
disables this feature. Since both pf_retrans and path_max_retrans can
|
||||
be changed by userspace application, a variable pf_enable is used to
|
||||
disable pf state.
|
||||
|
||||
Default: 0
|
||||
|
||||
|
||||
@@ -304,8 +304,12 @@ certain netdevs from flooding unicast traffic for which there is no FDB entry.
|
||||
IGMP Snooping
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
XXX: complete this section
|
||||
|
||||
In order to support IGMP snooping, the port netdevs should trap to the bridge
|
||||
driver all IGMP join and leave messages.
|
||||
The bridge multicast module will notify port netdevs on every multicast group
|
||||
changed whether it is static configured or dynamically joined/leave.
|
||||
The hardware implementation should be forwarding all registered multicast
|
||||
traffic groups only to the configured ports.
|
||||
|
||||
L3 Routing Offload
|
||||
------------------
|
||||
|
||||
+61
-26
@@ -371,6 +371,15 @@ ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
|
||||
M: Jiri Kosina <jikos@kernel.org>
|
||||
S: Maintained
|
||||
|
||||
ADF7242 IEEE 802.15.4 RADIO DRIVER
|
||||
M: Michael Hennerich <michael.hennerich@analog.com>
|
||||
W: https://wiki.analog.com/ADF7242
|
||||
W: http://ez.analog.com/community/linux-device-drivers
|
||||
L: linux-wpan@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/net/ieee802154/adf7242.c
|
||||
F: Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
|
||||
|
||||
ADM1025 HARDWARE MONITOR DRIVER
|
||||
M: Jean Delvare <jdelvare@suse.com>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
@@ -388,7 +397,7 @@ ADM8211 WIRELESS DRIVER
|
||||
L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/adm8211.*
|
||||
F: drivers/net/wireless/admtek/adm8211.*
|
||||
|
||||
ADP1653 FLASH CONTROLLER DRIVER
|
||||
M: Sakari Ailus <sakari.ailus@iki.fi>
|
||||
@@ -1992,7 +2001,7 @@ L: linux-wireless@vger.kernel.org
|
||||
W: http://www.thekelleys.org.uk/atmel
|
||||
W: http://atmelwlandriver.sourceforge.net/
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/atmel*
|
||||
F: drivers/net/wireless/atmel/atmel*
|
||||
|
||||
ATMEL MAXTOUCH DRIVER
|
||||
M: Nick Dyer <nick.dyer@itdev.co.uk>
|
||||
@@ -2081,7 +2090,7 @@ L: linux-wireless@vger.kernel.org
|
||||
L: b43-dev@lists.infradead.org
|
||||
W: http://wireless.kernel.org/en/users/Drivers/b43
|
||||
S: Odd Fixes
|
||||
F: drivers/net/wireless/b43/
|
||||
F: drivers/net/wireless/broadcom/b43/
|
||||
|
||||
B43LEGACY WIRELESS DRIVER
|
||||
M: Larry Finger <Larry.Finger@lwfinger.net>
|
||||
@@ -2089,7 +2098,7 @@ L: linux-wireless@vger.kernel.org
|
||||
L: b43-dev@lists.infradead.org
|
||||
W: http://wireless.kernel.org/en/users/Drivers/b43
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/b43legacy/
|
||||
F: drivers/net/wireless/broadcom/b43legacy/
|
||||
|
||||
BACKLIGHT CLASS/SUBSYSTEM
|
||||
M: Jingoo Han <jingoohan1@gmail.com>
|
||||
@@ -2101,7 +2110,7 @@ F: include/linux/backlight.h
|
||||
BATMAN ADVANCED
|
||||
M: Marek Lindner <mareklindner@neomailbox.ch>
|
||||
M: Simon Wunderlich <sw@simonwunderlich.de>
|
||||
M: Antonio Quartulli <antonio@meshcoding.com>
|
||||
M: Antonio Quartulli <a@unstable.cc>
|
||||
L: b.a.t.m.a.n@lists.open-mesh.org
|
||||
W: http://www.open-mesh.org/
|
||||
S: Maintained
|
||||
@@ -2391,7 +2400,7 @@ M: Hante Meuleman <meuleman@broadcom.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
L: brcm80211-dev-list@broadcom.com
|
||||
S: Supported
|
||||
F: drivers/net/wireless/brcm80211/
|
||||
F: drivers/net/wireless/broadcom/brcm80211/
|
||||
|
||||
BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
|
||||
M: QLogic-Storage-Upstream@qlogic.com
|
||||
@@ -3113,7 +3122,7 @@ F: sound/pci/cs5535audio/
|
||||
CW1200 WLAN driver
|
||||
M: Solomon Peachy <pizza@shaftnet.org>
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/cw1200/
|
||||
F: drivers/net/wireless/st/cw1200/
|
||||
|
||||
CX18 VIDEO4LINUX DRIVER
|
||||
M: Andy Walls <awalls@md.metrocast.net>
|
||||
@@ -5035,7 +5044,7 @@ L: hostap@shmoo.com (subscribers-only)
|
||||
L: linux-wireless@vger.kernel.org
|
||||
W: http://hostap.epitest.fi/
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/hostap/
|
||||
F: drivers/net/wireless/intersil/hostap/
|
||||
|
||||
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
|
||||
L: platform-driver-x86@vger.kernel.org
|
||||
@@ -5273,6 +5282,13 @@ L: netdev@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/net/ethernet/ibm/ibmveth.*
|
||||
|
||||
IBM Power SRIOV Virtual NIC Device Driver
|
||||
M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
|
||||
M: John Allen <jallen@linux.vnet.ibm.com>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/net/ethernet/ibm/ibmvnic.*
|
||||
|
||||
IBM Power Virtual SCSI Device Drivers
|
||||
M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
|
||||
L: linux-scsi@vger.kernel.org
|
||||
@@ -5603,7 +5619,7 @@ L: linux-wireless@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/networking/README.ipw2100
|
||||
F: Documentation/networking/README.ipw2200
|
||||
F: drivers/net/wireless/ipw2x00/
|
||||
F: drivers/net/wireless/intel/ipw2x00/
|
||||
|
||||
INTEL(R) TRACE HUB
|
||||
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
|
||||
@@ -5635,7 +5651,7 @@ INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
|
||||
M: Stanislaw Gruszka <sgruszka@redhat.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/net/wireless/iwlegacy/
|
||||
F: drivers/net/wireless/intel/iwlegacy/
|
||||
|
||||
INTEL WIRELESS WIFI LINK (iwlwifi)
|
||||
M: Johannes Berg <johannes.berg@intel.com>
|
||||
@@ -5645,7 +5661,7 @@ L: linux-wireless@vger.kernel.org
|
||||
W: http://intellinuxwireless.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
|
||||
S: Supported
|
||||
F: drivers/net/wireless/iwlwifi/
|
||||
F: drivers/net/wireless/intel/iwlwifi/
|
||||
|
||||
INTEL MANAGEMENT ENGINE (mei)
|
||||
M: Tomas Winkler <tomas.winkler@intel.com>
|
||||
@@ -6697,7 +6713,7 @@ F: drivers/net/ethernet/marvell/sk*
|
||||
MARVELL LIBERTAS WIRELESS DRIVER
|
||||
L: libertas-dev@lists.infradead.org
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/libertas/
|
||||
F: drivers/net/wireless/marvell/libertas/
|
||||
|
||||
MARVELL MV643XX ETHERNET DRIVER
|
||||
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
||||
@@ -6717,13 +6733,13 @@ M: Amitkumar Karwar <akarwar@marvell.com>
|
||||
M: Nishant Sarmukadam <nishants@marvell.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/mwifiex/
|
||||
F: drivers/net/wireless/marvell/mwifiex/
|
||||
|
||||
MARVELL MWL8K WIRELESS DRIVER
|
||||
M: Lennert Buytenhek <buytenh@wantstofly.org>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
S: Odd Fixes
|
||||
F: drivers/net/wireless/mwl8k.c
|
||||
F: drivers/net/wireless/marvell/mwl8k.c
|
||||
|
||||
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
|
||||
M: Nicolas Pitre <nico@fluxnic.net>
|
||||
@@ -7359,6 +7375,13 @@ F: include/net/netrom.h
|
||||
F: include/uapi/linux/netrom.h
|
||||
F: net/netrom/
|
||||
|
||||
NETRONOME ETHERNET DRIVERS
|
||||
M: Jakub Kicinski <jakub.kicinski@netronome.com>
|
||||
M: Rolf Neugebauer <rolf.neugebauer@netronome.com>
|
||||
L: oss-drivers@netronome.com
|
||||
S: Maintained
|
||||
F: drivers/net/ethernet/netronome/
|
||||
|
||||
NETWORK BLOCK DEVICE (NBD)
|
||||
M: Markus Pargmann <mpa@pengutronix.de>
|
||||
S: Maintained
|
||||
@@ -7490,7 +7513,12 @@ F: net/nfc/
|
||||
F: include/net/nfc/
|
||||
F: include/uapi/linux/nfc.h
|
||||
F: drivers/nfc/
|
||||
F: include/linux/platform_data/microread.h
|
||||
F: include/linux/platform_data/nfcmrvl.h
|
||||
F: include/linux/platform_data/nxp-nci.h
|
||||
F: include/linux/platform_data/pn544.h
|
||||
F: include/linux/platform_data/st21nfca.h
|
||||
F: include/linux/platform_data/st-nci.h
|
||||
F: Documentation/devicetree/bindings/net/nfc/
|
||||
|
||||
NFS, SUNRPC, AND LOCKD CLIENTS
|
||||
@@ -7940,7 +7968,7 @@ L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/en/users/Drivers/orinoco
|
||||
W: http://www.nongnu.org/orinoco/
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/orinoco/
|
||||
F: drivers/net/wireless/intersil/orinoco/
|
||||
|
||||
OSD LIBRARY and FILESYSTEM
|
||||
M: Boaz Harrosh <ooo@electrozaur.com>
|
||||
@@ -7966,7 +7994,7 @@ M: Christian Lamparter <chunkeey@googlemail.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/en/users/Drivers/p54
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/p54/
|
||||
F: drivers/net/wireless/intersil/p54/
|
||||
|
||||
PA SEMI ETHERNET DRIVER
|
||||
M: Olof Johansson <olof@lixom.net>
|
||||
@@ -8517,7 +8545,7 @@ M: "Luis R. Rodriguez" <mcgrof@gmail.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/en/users/Drivers/p54
|
||||
S: Obsolete
|
||||
F: drivers/net/wireless/prism54/
|
||||
F: drivers/net/wireless/intersil/prism54/
|
||||
|
||||
PS3 NETWORK SUPPORT
|
||||
M: Geoff Levand <geoff@infradead.org>
|
||||
@@ -8821,7 +8849,7 @@ M: Stanislaw Gruszka <sgruszka@redhat.com>
|
||||
M: Helmut Schaa <helmut.schaa@googlemail.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/rt2x00/
|
||||
F: drivers/net/wireless/ralink/rt2x00/
|
||||
|
||||
RAMDISK RAM BLOCK DEVICE DRIVER
|
||||
M: Jens Axboe <axboe@kernel.dk>
|
||||
@@ -9062,7 +9090,7 @@ L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/rtl818x/rtl8180/
|
||||
F: drivers/net/wireless/realtek/rtl818x/rtl8180/
|
||||
|
||||
RTL8187 WIRELESS DRIVER
|
||||
M: Herton Ronaldo Krzesinski <herton@canonical.com>
|
||||
@@ -9072,7 +9100,7 @@ L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/rtl818x/rtl8187/
|
||||
F: drivers/net/wireless/realtek/rtl818x/rtl8187/
|
||||
|
||||
RTL8192CE WIRELESS DRIVER
|
||||
M: Larry Finger <Larry.Finger@lwfinger.net>
|
||||
@@ -9081,8 +9109,8 @@ L: linux-wireless@vger.kernel.org
|
||||
W: http://wireless.kernel.org/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/rtlwifi/
|
||||
F: drivers/net/wireless/rtlwifi/rtl8192ce/
|
||||
F: drivers/net/wireless/realtek/rtlwifi/
|
||||
F: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/
|
||||
|
||||
RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
|
||||
M: Jes Sorensen <Jes.Sorensen@redhat.com>
|
||||
@@ -9126,7 +9154,7 @@ F: drivers/s390/block/dasd*
|
||||
F: block/partitions/ibm.c
|
||||
|
||||
S390 NETWORK DRIVERS
|
||||
M: Ursula Braun <ursula.braun@de.ibm.com>
|
||||
M: Ursula Braun <ubraun@linux.vnet.ibm.com>
|
||||
L: linux-s390@vger.kernel.org
|
||||
W: http://www.ibm.com/developerworks/linux/linux390/
|
||||
S: Supported
|
||||
@@ -9156,7 +9184,7 @@ S: Supported
|
||||
F: drivers/s390/scsi/zfcp_*
|
||||
|
||||
S390 IUCV NETWORK LAYER
|
||||
M: Ursula Braun <ursula.braun@de.ibm.com>
|
||||
M: Ursula Braun <ubraun@linux.vnet.ibm.com>
|
||||
L: linux-s390@vger.kernel.org
|
||||
W: http://www.ibm.com/developerworks/linux/linux390/
|
||||
S: Supported
|
||||
@@ -11185,6 +11213,13 @@ L: linux-usb@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/usb/class/usblp.c
|
||||
|
||||
USB QMI WWAN NETWORK DRIVER
|
||||
M: Bjørn Mork <bjorn@mork.no>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/ABI/testing/sysfs-class-net-qmi
|
||||
F: drivers/net/usb/qmi_wwan.c
|
||||
|
||||
USB RTL8150 DRIVER
|
||||
M: Petko Manolov <petkan@nucleusys.com>
|
||||
L: linux-usb@vger.kernel.org
|
||||
@@ -11281,7 +11316,7 @@ USB ZD1201 DRIVER
|
||||
L: linux-wireless@vger.kernel.org
|
||||
W: http://linux-lc100020.sourceforge.net
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/zd1201.*
|
||||
F: drivers/net/wireless/zydas/zd1201.*
|
||||
|
||||
USB ZR364XX DRIVER
|
||||
M: Antoine Jacquet <royale@zerezo.com>
|
||||
@@ -11912,7 +11947,7 @@ W: http://zd1211.ath.cx/wiki/DriverRewrite
|
||||
L: linux-wireless@vger.kernel.org
|
||||
L: zd1211-devs@lists.sourceforge.net (subscribers-only)
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/zd1211rw/
|
||||
F: drivers/net/wireless/zydas/zd1211rw/
|
||||
|
||||
ZPOOL COMPRESSED PAGE STORAGE API
|
||||
M: Dan Streetman <ddstreet@ieee.org>
|
||||
|
||||
@@ -92,4 +92,7 @@
|
||||
#define SO_ATTACH_BPF 50
|
||||
#define SO_DETACH_BPF SO_DETACH_FILTER
|
||||
|
||||
#define SO_ATTACH_REUSEPORT_CBPF 51
|
||||
#define SO_ATTACH_REUSEPORT_EBPF 52
|
||||
|
||||
#endif /* _UAPI_ASM_SOCKET_H */
|
||||
|
||||
@@ -152,8 +152,6 @@ static void build_prologue(struct jit_ctx *ctx)
|
||||
const u8 r8 = bpf2a64[BPF_REG_8];
|
||||
const u8 r9 = bpf2a64[BPF_REG_9];
|
||||
const u8 fp = bpf2a64[BPF_REG_FP];
|
||||
const u8 ra = bpf2a64[BPF_REG_A];
|
||||
const u8 rx = bpf2a64[BPF_REG_X];
|
||||
const u8 tmp1 = bpf2a64[TMP_REG_1];
|
||||
const u8 tmp2 = bpf2a64[TMP_REG_2];
|
||||
|
||||
@@ -200,10 +198,6 @@ static void build_prologue(struct jit_ctx *ctx)
|
||||
|
||||
/* Set up function call stack */
|
||||
emit(A64_SUB_I(1, A64_SP, A64_SP, STACK_SIZE), ctx);
|
||||
|
||||
/* Clear registers A and X */
|
||||
emit_a64_mov_i64(ra, 0, ctx);
|
||||
emit_a64_mov_i64(rx, 0, ctx);
|
||||
}
|
||||
|
||||
static void build_epilogue(struct jit_ctx *ctx)
|
||||
|
||||
@@ -85,4 +85,7 @@
|
||||
#define SO_ATTACH_BPF 50
|
||||
#define SO_DETACH_BPF SO_DETACH_FILTER
|
||||
|
||||
#define SO_ATTACH_REUSEPORT_CBPF 51
|
||||
#define SO_ATTACH_REUSEPORT_EBPF 52
|
||||
|
||||
#endif /* _UAPI__ASM_AVR32_SOCKET_H */
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user