You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c net/8021q/vlan_core.c net/core/dev.c
This commit is contained in:
David S. Miller
@@ -1,3 +1,46 @@
|
||||
What: /sys/bus/pci/drivers/.../bind
|
||||
Date: December 2003
|
||||
Contact: linux-pci@vger.kernel.org
|
||||
Description:
|
||||
Writing a device location to this file will cause
|
||||
the driver to attempt to bind to the device found at
|
||||
this location. This is useful for overriding default
|
||||
bindings. The format for the location is: DDDD:BB:DD.F.
|
||||
That is Domain:Bus:Device.Function and is the same as
|
||||
found in /sys/bus/pci/devices/. For example:
|
||||
# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
|
||||
(Note: kernels before 2.6.28 may require echo -n).
|
||||
|
||||
What: /sys/bus/pci/drivers/.../unbind
|
||||
Date: December 2003
|
||||
Contact: linux-pci@vger.kernel.org
|
||||
Description:
|
||||
Writing a device location to this file will cause the
|
||||
driver to attempt to unbind from the device found at
|
||||
this location. This may be useful when overriding default
|
||||
bindings. The format for the location is: DDDD:BB:DD.F.
|
||||
That is Domain:Bus:Device.Function and is the same as
|
||||
found in /sys/bus/pci/devices/. For example:
|
||||
# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
|
||||
(Note: kernels before 2.6.28 may require echo -n).
|
||||
|
||||
What: /sys/bus/pci/drivers/.../new_id
|
||||
Date: December 2003
|
||||
Contact: linux-pci@vger.kernel.org
|
||||
Description:
|
||||
Writing a device ID to this file will attempt to
|
||||
dynamically add a new device ID to a PCI device driver.
|
||||
This may allow the driver to support more hardware than
|
||||
was included in the driver's static device ID support
|
||||
table at compile time. The format for the device ID is:
|
||||
VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID,
|
||||
Device ID, Subsystem Vendor ID, Subsystem Device ID,
|
||||
Class, Class Mask, and Private Driver Data. The Vendor ID
|
||||
and Device ID fields are required, the rest are optional.
|
||||
Upon successfully adding an ID, the driver will probe
|
||||
for the device and attempt to bind to it. For example:
|
||||
# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
|
||||
|
||||
What: /sys/bus/pci/devices/.../vpd
|
||||
Date: February 2008
|
||||
Contact: Ben Hutchings <bhutchings@solarflare.com>
|
||||
|
||||
@@ -1,205 +0,0 @@
|
||||
This README escorted the skystar2-driver rewriting procedure. It describes the
|
||||
state of the new flexcop-driver set and some internals are written down here
|
||||
too.
|
||||
|
||||
This document hopefully describes things about the flexcop and its
|
||||
device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
|
||||
drivers based on the skystar2.c and other information.
|
||||
|
||||
Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
|
||||
touched and rewritten.
|
||||
|
||||
History & News
|
||||
==============
|
||||
2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
|
||||
|
||||
|
||||
|
||||
|
||||
General coding processing
|
||||
=========================
|
||||
|
||||
We should proceed as follows (as long as no one complains):
|
||||
|
||||
0) Think before start writing code!
|
||||
|
||||
1) rewriting the skystar2.c with the help of the flexcop register descriptions
|
||||
and splitting up the files to a pci-bus-part and a flexcop-part.
|
||||
The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
|
||||
device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
|
||||
|
||||
2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
|
||||
and other pci drivers)
|
||||
|
||||
3) make some beautification (see 'Improvements when rewriting (refactoring) is
|
||||
done')
|
||||
|
||||
4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
|
||||
a wider tester audience.
|
||||
|
||||
5) creating an usb-bus-part using the already written flexcop code for the pci
|
||||
card.
|
||||
|
||||
Idea: create a kernel-object for the flexcop and export all important
|
||||
functions. This option saves kernel-memory, but maybe a lot of functions have
|
||||
to be exported to kernel namespace.
|
||||
|
||||
|
||||
Current situation
|
||||
=================
|
||||
|
||||
0) Done :)
|
||||
1) Done (some minor issues left)
|
||||
2) Done
|
||||
3) Not ready yet, more information is necessary
|
||||
4) next to be done (see the table below)
|
||||
5) USB driver is working (yes, there are some minor issues)
|
||||
|
||||
What seems to be ready?
|
||||
-----------------------
|
||||
|
||||
1) Rewriting
|
||||
1a) i2c is cut off from the flexcop-pci.c and seems to work
|
||||
1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
|
||||
1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
|
||||
1e) eeprom (reading MAC address)
|
||||
1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
|
||||
1f) misc. register accesses for reading parameters (e.g. resetting, revision)
|
||||
1g) pid/mac filter (flexcop-hw-filter.c)
|
||||
1i) dvb-stuff initialization in flexcop.c (done)
|
||||
1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
|
||||
1j) remove flexcop initialization from flexcop-pci.c completely (done)
|
||||
1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
|
||||
1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
|
||||
non-static where possible, moved code to proper places)
|
||||
|
||||
2) Search for errors in the leftover of flexcop-pci.c (partially done)
|
||||
5a) add MAC address reading
|
||||
5c) feeding of ISOC data to the software demux (format of the isochronous data
|
||||
and speed optimization, no real error) (thanks to Vadim Catana)
|
||||
|
||||
What to do in the near future?
|
||||
--------------------------------------
|
||||
(no special order here)
|
||||
|
||||
5) USB driver
|
||||
5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
|
||||
|
||||
Testing changes
|
||||
---------------
|
||||
|
||||
O = item is working
|
||||
P = item is partially working
|
||||
X = item is not working
|
||||
N = item does not apply here
|
||||
<empty field> = item need to be examined
|
||||
|
||||
| PCI | USB
|
||||
item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
|
||||
-------+-------+---------+---------+-------+-------+---------+---------+-------
|
||||
1a) | O | | | | N | N | N | N
|
||||
1b) | O | | | | | | O |
|
||||
1c) | N | N | | | N | N | O |
|
||||
1d) | O | O
|
||||
1e) | O | O
|
||||
1f) | P
|
||||
1g) | O
|
||||
1h) | P |
|
||||
1i) | O | N
|
||||
1j) | O | N
|
||||
1l) | O | N
|
||||
2) | O | N
|
||||
5a) | N | O
|
||||
5b)* | N |
|
||||
5c) | N | O
|
||||
|
||||
* - not done yet
|
||||
|
||||
Known bugs and problems and TODO
|
||||
--------------------------------
|
||||
|
||||
1g/h/l) when pid filtering is enabled on the pci card
|
||||
|
||||
DMA usage currently:
|
||||
The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
|
||||
address and triggers an IRQ when it's full and starts writing to the second
|
||||
address. When the second address is full, the IRQ is triggered again, and
|
||||
the flexcop writes to first address again, and so on.
|
||||
The buffersize of each address is currently 640*188 bytes.
|
||||
|
||||
Problem is, when using hw-pid-filtering and doing some low-bandwidth
|
||||
operation (like scanning) the buffers won't be filled enough to trigger
|
||||
the IRQ. That's why:
|
||||
|
||||
When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
|
||||
is triggered. Is the current write address of DMA1 different to the one
|
||||
during the last IRQ, then the data is passed to the demuxer.
|
||||
|
||||
There is an additional DMA-IRQ-method: packet count IRQ. This isn't
|
||||
implemented correctly yet.
|
||||
|
||||
The solution is to disable HW PID filtering, but I don't know how the DVB
|
||||
API software demux behaves on slow systems with 45MBit/s TS.
|
||||
|
||||
Solved bugs :)
|
||||
--------------
|
||||
1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
|
||||
working)
|
||||
SOLUTION: also index 0 was affected, because net_translation is done for
|
||||
these indexes by default
|
||||
|
||||
5b) isochronous transfer does only work in the first attempt (for the Sky2PC
|
||||
USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
|
||||
woke up again (don't know if this need fixes, see
|
||||
flexcop-fe-tuner.c:flexcop_sleep)
|
||||
|
||||
NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
|
||||
anything in the while the driver is loaded the first time), no transfers take
|
||||
place anymore.
|
||||
|
||||
Improvements when rewriting (refactoring) is done
|
||||
=================================================
|
||||
|
||||
- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
|
||||
(enable sleeping for other demods than dvb-s)
|
||||
- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
|
||||
|
||||
Debugging
|
||||
---------
|
||||
- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
|
||||
with this flexcop, this is important, because i2c is now using the
|
||||
flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
|
||||
that, please tell us so).
|
||||
|
||||
Everything which is identical in the following table, can be put into a common
|
||||
flexcop-module.
|
||||
|
||||
PCI USB
|
||||
-------------------------------------------------------------------------------
|
||||
Different:
|
||||
Register access: accessing IO memory USB control message
|
||||
I2C bus: I2C bus of the FC USB control message
|
||||
Data transfer: DMA isochronous transfer
|
||||
EEPROM transfer: through i2c bus not clear yet
|
||||
|
||||
Identical:
|
||||
Streaming: accessing registers
|
||||
PID Filtering: accessing registers
|
||||
Sram destinations: accessing registers
|
||||
Tuner/Demod: I2C bus
|
||||
DVB-stuff: can be written for common use
|
||||
|
||||
Acknowledgements (just for the rewriting part)
|
||||
================
|
||||
|
||||
Bjarne Steinsbo thought a lot in the first place of the pci part for this code
|
||||
sharing idea.
|
||||
|
||||
Andreas Oberritter for providing a recent PCI initialization template
|
||||
(pluto2.c).
|
||||
|
||||
Boleslaw Ciesielski for pointing out a problem with firmware loader.
|
||||
|
||||
Vadim Catana for correcting the USB transfer.
|
||||
|
||||
comments, critics and ideas to linux-dvb@linuxtv.org.
|
||||
@@ -1,5 +1,5 @@
|
||||
How to set up the Technisat devices
|
||||
===================================
|
||||
How to set up the Technisat/B2C2 Flexcop devices
|
||||
================================================
|
||||
|
||||
1) Find out what device you have
|
||||
================================
|
||||
@@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)...
|
||||
|
||||
If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
|
||||
"Multimedia devices" => "Customise analog and hybrid tuner modules to build"
|
||||
In this directory uncheck every driver which is activated there.
|
||||
In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
|
||||
|
||||
Then please activate:
|
||||
2a) Main module part:
|
||||
|
||||
a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
|
||||
b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
|
||||
b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
|
||||
OR
|
||||
c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
|
||||
d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
|
||||
Notice: d.) is helpful for troubleshooting
|
||||
|
||||
2b) Frontend module part:
|
||||
|
||||
1.) Revision 2.3:
|
||||
1.) SkyStar DVB-S Revision 2.3:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
|
||||
|
||||
2.) Revision 2.6:
|
||||
2.) SkyStar DVB-S Revision 2.6:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
|
||||
|
||||
3.) Revision 2.7:
|
||||
3.) SkyStar DVB-S Revision 2.7:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
|
||||
c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
|
||||
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
|
||||
|
||||
4.) Revision 2.8:
|
||||
4.) SkyStar DVB-S Revision 2.8:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
|
||||
c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
|
||||
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
|
||||
|
||||
5.) DVB-T card:
|
||||
5.) AirStar DVB-T card:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
|
||||
|
||||
6.) DVB-C card:
|
||||
6.) CableStar DVB-C card:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
|
||||
|
||||
7.) ATSC card 1st generation:
|
||||
7.) AirStar ATSC card 1st generation:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
|
||||
|
||||
8.) ATSC card 2nd generation:
|
||||
8.) AirStar ATSC card 2nd generation:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
|
||||
c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
|
||||
c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
|
||||
|
||||
Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
|
||||
9.) AirStar ATSC card 3rd generation:
|
||||
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
|
||||
b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
|
||||
c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
|
||||
|
||||
Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
|
||||
|
||||
@@ -114,7 +114,7 @@ In addition, the following text indicates that the option:
|
||||
Parameters denoted with BOOT are actually interpreted by the boot
|
||||
loader, and have no meaning to the kernel directly.
|
||||
Do not modify the syntax of boot loader parameters without extreme
|
||||
need or coordination with <Documentation/x86/i386/boot.txt>.
|
||||
need or coordination with <Documentation/x86/boot.txt>.
|
||||
|
||||
There are also arch-specific kernel-parameters not documented here.
|
||||
See for example <Documentation/x86/x86_64/boot-options.txt>.
|
||||
@@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file
|
||||
icn= [HW,ISDN]
|
||||
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
|
||||
|
||||
ide= [HW] (E)IDE subsystem
|
||||
Format: ide=nodma or ide=doubler
|
||||
ide-core.nodma= [HW] (E)IDE subsystem
|
||||
Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
|
||||
.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
|
||||
.chs .ignore_cable are additional options
|
||||
See Documentation/ide/ide.txt.
|
||||
|
||||
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
|
||||
@@ -2449,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file
|
||||
See Documentation/fb/modedb.txt.
|
||||
|
||||
vga= [BOOT,X86-32] Select a particular video mode
|
||||
See Documentation/x86/i386/boot.txt and
|
||||
See Documentation/x86/boot.txt and
|
||||
Documentation/svga.txt.
|
||||
Use vga=ask for menu.
|
||||
This is actually a boot loader parameter; the value is
|
||||
|
||||
@@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
|
||||
gpio_request(gpio + 7, "nCF_SEL");
|
||||
gpio_direction_output(gpio + 7, 1);
|
||||
|
||||
/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
|
||||
setup_usb(500, 8);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@@ -417,9 +420,6 @@ static __init void davinci_evm_init(void)
|
||||
platform_add_devices(davinci_evm_devices,
|
||||
ARRAY_SIZE(davinci_evm_devices));
|
||||
evm_init_i2c();
|
||||
|
||||
/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
|
||||
setup_usb(500, 8);
|
||||
}
|
||||
|
||||
static __init void davinci_evm_irq_init(void)
|
||||
|
||||
@@ -230,6 +230,11 @@ static struct clk davinci_clks[] = {
|
||||
.rate = &commonrate,
|
||||
.lpsc = DAVINCI_LPSC_GPIO,
|
||||
},
|
||||
{
|
||||
.name = "usb",
|
||||
.rate = &commonrate,
|
||||
.lpsc = DAVINCI_LPSC_USB,
|
||||
},
|
||||
{
|
||||
.name = "AEMIFCLK",
|
||||
.rate = &commonrate,
|
||||
|
||||
@@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = {
|
||||
#elif defined(CONFIG_USB_MUSB_HOST)
|
||||
.mode = MUSB_HOST,
|
||||
#endif
|
||||
.clock = "usb",
|
||||
.config = &musb_config,
|
||||
};
|
||||
|
||||
|
||||
@@ -19,6 +19,7 @@
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
#include <asm/elf.h>
|
||||
#include <asm/mach-types.h>
|
||||
@@ -201,8 +202,13 @@ static struct platform_device *devs[] __initdata = {
|
||||
&pata_device,
|
||||
};
|
||||
|
||||
static struct i2c_board_info i2c_rtc = {
|
||||
I2C_BOARD_INFO("pcf8583", 0x50)
|
||||
};
|
||||
|
||||
static int __init rpc_init(void)
|
||||
{
|
||||
i2c_register_board_info(0, &i2c_rtc, 1);
|
||||
return platform_add_devices(devs, ARRAY_SIZE(devs));
|
||||
}
|
||||
|
||||
|
||||
@@ -638,6 +638,17 @@ config DMAR
|
||||
and include PCI device scope covered by these DMA
|
||||
remapping devices.
|
||||
|
||||
config DMAR_DEFAULT_ON
|
||||
def_bool y
|
||||
prompt "Enable DMA Remapping Devices by default"
|
||||
depends on DMAR
|
||||
help
|
||||
Selecting this option will enable a DMAR device at boot time if
|
||||
one is found. If this option is not selected, DMAR support can
|
||||
be enabled by passing intel_iommu=on to the kernel. It is
|
||||
recommended you say N here while the DMAR code remains
|
||||
experimental.
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
||||
@@ -507,7 +507,7 @@ static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol)
|
||||
if (trigger == IOSAPIC_EDGE)
|
||||
return -EINVAL;
|
||||
|
||||
for (i = 0; i <= NR_IRQS; i++) {
|
||||
for (i = 0; i < NR_IRQS; i++) {
|
||||
info = &iosapic_intr_info[i];
|
||||
if (info->trigger == trigger && info->polarity == pol &&
|
||||
(info->dmode == IOSAPIC_FIXED ||
|
||||
|
||||
@@ -2149,7 +2149,7 @@ unw_remove_unwind_table (void *handle)
|
||||
|
||||
/* next, remove hash table entries for this table */
|
||||
|
||||
for (index = 0; index <= UNW_HASH_SIZE; ++index) {
|
||||
for (index = 0; index < UNW_HASH_SIZE; ++index) {
|
||||
tmp = unw.cache + unw.hash[index];
|
||||
if (unw.hash[index] >= UNW_CACHE_SIZE
|
||||
|| tmp->ip < table->start || tmp->ip >= table->end)
|
||||
|
||||
+7
-2
@@ -603,7 +603,7 @@ config CAVIUM_OCTEON_SIMULATOR
|
||||
select SYS_SUPPORTS_64BIT_KERNEL
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
select SYS_SUPPORTS_HIGHMEM
|
||||
select CPU_CAVIUM_OCTEON
|
||||
select SYS_HAS_CPU_CAVIUM_OCTEON
|
||||
help
|
||||
The Octeon simulator is software performance model of the Cavium
|
||||
Octeon Processor. It supports simulating Octeon processors on x86
|
||||
@@ -618,7 +618,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
select SYS_SUPPORTS_HIGHMEM
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
select CPU_CAVIUM_OCTEON
|
||||
select SYS_HAS_CPU_CAVIUM_OCTEON
|
||||
select SWAP_IO_SPACE
|
||||
help
|
||||
This option supports all of the Octeon reference boards from Cavium
|
||||
@@ -1234,6 +1234,7 @@ config CPU_SB1
|
||||
|
||||
config CPU_CAVIUM_OCTEON
|
||||
bool "Cavium Octeon processor"
|
||||
depends on SYS_HAS_CPU_CAVIUM_OCTEON
|
||||
select IRQ_CPU
|
||||
select IRQ_CPU_OCTEON
|
||||
select CPU_HAS_PREFETCH
|
||||
@@ -1314,6 +1315,9 @@ config SYS_HAS_CPU_RM9000
|
||||
config SYS_HAS_CPU_SB1
|
||||
bool
|
||||
|
||||
config SYS_HAS_CPU_CAVIUM_OCTEON
|
||||
bool
|
||||
|
||||
#
|
||||
# CPU may reorder R->R, R->W, W->R, W->W
|
||||
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
|
||||
@@ -1387,6 +1391,7 @@ config 32BIT
|
||||
config 64BIT
|
||||
bool "64-bit kernel"
|
||||
depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
|
||||
select HAVE_SYSCALL_WRAPPERS
|
||||
help
|
||||
Select this option if you want to build a 64-bit kernel.
|
||||
|
||||
|
||||
@@ -118,7 +118,7 @@ void __init plat_time_init(void)
|
||||
* setup counter 1 (RTC) to tick at full speed
|
||||
*/
|
||||
t = 0xffffff;
|
||||
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
|
||||
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
|
||||
asm volatile ("nop");
|
||||
if (!t)
|
||||
goto cntr_err;
|
||||
@@ -127,7 +127,7 @@ void __init plat_time_init(void)
|
||||
au_sync();
|
||||
|
||||
t = 0xffffff;
|
||||
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
|
||||
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
|
||||
asm volatile ("nop");
|
||||
if (!t)
|
||||
goto cntr_err;
|
||||
@@ -135,7 +135,7 @@ void __init plat_time_init(void)
|
||||
au_sync();
|
||||
|
||||
t = 0xffffff;
|
||||
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
|
||||
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
|
||||
asm volatile ("nop");
|
||||
if (!t)
|
||||
goto cntr_err;
|
||||
|
||||
@@ -111,7 +111,6 @@ int show_interrupts(struct seq_file *p, void *v)
|
||||
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
|
||||
#endif
|
||||
seq_printf(p, " %14s", irq_desc[i].chip->name);
|
||||
seq_printf(p, "-%-8s", irq_desc[i].name);
|
||||
seq_printf(p, " %s", action->name);
|
||||
|
||||
for (action=action->next; action; action = action->next)
|
||||
|
||||
+39
-30
@@ -32,6 +32,7 @@
|
||||
#include <linux/module.h>
|
||||
#include <linux/binfmts.h>
|
||||
#include <linux/security.h>
|
||||
#include <linux/syscalls.h>
|
||||
#include <linux/compat.h>
|
||||
#include <linux/vfs.h>
|
||||
#include <linux/ipc.h>
|
||||
@@ -63,9 +64,9 @@
|
||||
#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
|
||||
#endif
|
||||
|
||||
asmlinkage unsigned long
|
||||
sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
|
||||
unsigned long flags, unsigned long fd, unsigned long pgoff)
|
||||
SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
|
||||
unsigned long, prot, unsigned long, flags, unsigned long, fd,
|
||||
unsigned long, pgoff)
|
||||
{
|
||||
struct file * file = NULL;
|
||||
unsigned long error;
|
||||
@@ -121,21 +122,21 @@ struct rlimit32 {
|
||||
int rlim_max;
|
||||
};
|
||||
|
||||
asmlinkage long sys32_truncate64(const char __user * path,
|
||||
unsigned long __dummy, int a2, int a3)
|
||||
SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
|
||||
unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
|
||||
{
|
||||
return sys_truncate(path, merge_64(a2, a3));
|
||||
}
|
||||
|
||||
asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
|
||||
int a2, int a3)
|
||||
SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
|
||||
unsigned long, a2, unsigned long, a3)
|
||||
{
|
||||
return sys_ftruncate(fd, merge_64(a2, a3));
|
||||
}
|
||||
|
||||
asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
|
||||
unsigned int offset_low, loff_t __user * result,
|
||||
unsigned int origin)
|
||||
SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
|
||||
unsigned long, offset_low, loff_t __user *, result,
|
||||
unsigned long, origin)
|
||||
{
|
||||
return sys_llseek(fd, offset_high, offset_low, result, origin);
|
||||
}
|
||||
@@ -144,20 +145,20 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
|
||||
lseek back to original location. They fail just like lseek does on
|
||||
non-seekable files. */
|
||||
|
||||
asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
|
||||
size_t count, u32 unused, u64 a4, u64 a5)
|
||||
SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
|
||||
unsigned long, unused, unsigned long, a4, unsigned long, a5)
|
||||
{
|
||||
return sys_pread64(fd, buf, count, merge_64(a4, a5));
|
||||
}
|
||||
|
||||
asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
|
||||
size_t count, u32 unused, u64 a4, u64 a5)
|
||||
SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
|
||||
size_t, count, u32, unused, u64, a4, u64, a5)
|
||||
{
|
||||
return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
|
||||
}
|
||||
|
||||
asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
|
||||
struct compat_timespec __user *interval)
|
||||
SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
|
||||
struct compat_timespec __user *, interval)
|
||||
{
|
||||
struct timespec t;
|
||||
int ret;
|
||||
@@ -174,8 +175,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
|
||||
|
||||
#ifdef CONFIG_SYSVIPC
|
||||
|
||||
asmlinkage long
|
||||
sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
|
||||
SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
|
||||
unsigned long, ptr, unsigned long, fifth)
|
||||
{
|
||||
int version, err;
|
||||
|
||||
@@ -233,8 +234,8 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
|
||||
|
||||
#else
|
||||
|
||||
asmlinkage long
|
||||
sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
|
||||
SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
|
||||
u32, ptr, u32 fifth)
|
||||
{
|
||||
return -ENOSYS;
|
||||
}
|
||||
@@ -242,7 +243,7 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
|
||||
#endif /* CONFIG_SYSVIPC */
|
||||
|
||||
#ifdef CONFIG_MIPS32_N32
|
||||
asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
|
||||
SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
|
||||
{
|
||||
/* compat_sys_semctl expects a pointer to union semun */
|
||||
u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
|
||||
@@ -251,13 +252,14 @@ asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
|
||||
return compat_sys_semctl(semid, semnum, cmd, uptr);
|
||||
}
|
||||
|
||||
asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
|
||||
SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
|
||||
int, msgflg)
|
||||
{
|
||||
return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
|
||||
}
|
||||
|
||||
asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
|
||||
int msgflg)
|
||||
SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
|
||||
int, msgtyp, int, msgflg)
|
||||
{
|
||||
return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
|
||||
compat_ptr(msgp));
|
||||
@@ -277,7 +279,7 @@ struct sysctl_args32
|
||||
|
||||
#ifdef CONFIG_SYSCTL_SYSCALL
|
||||
|
||||
asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
|
||||
SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
|
||||
{
|
||||
struct sysctl_args32 tmp;
|
||||
int error;
|
||||
@@ -316,9 +318,16 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
|
||||
return error;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
|
||||
{
|
||||
return -ENOSYS;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SYSCTL_SYSCALL */
|
||||
|
||||
asmlinkage long sys32_newuname(struct new_utsname __user * name)
|
||||
SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
@@ -334,7 +343,7 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name)
|
||||
return ret;
|
||||
}
|
||||
|
||||
asmlinkage int sys32_personality(unsigned long personality)
|
||||
SYSCALL_DEFINE1(32_personality, unsigned long, personality)
|
||||
{
|
||||
int ret;
|
||||
personality &= 0xffffffff;
|
||||
@@ -357,7 +366,7 @@ struct ustat32 {
|
||||
|
||||
extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
|
||||
|
||||
asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
|
||||
SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
|
||||
{
|
||||
int err;
|
||||
struct ustat tmp;
|
||||
@@ -381,8 +390,8 @@ out:
|
||||
return err;
|
||||
}
|
||||
|
||||
asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
|
||||
s32 count)
|
||||
SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
|
||||
compat_off_t __user *, offset, s32, count)
|
||||
{
|
||||
mm_segment_t old_fs = get_fs();
|
||||
int ret;
|
||||
|
||||
@@ -399,7 +399,7 @@ einval: li v0, -ENOSYS
|
||||
sys sys_swapon 2
|
||||
sys sys_reboot 3
|
||||
sys sys_old_readdir 3
|
||||
sys old_mmap 6 /* 4090 */
|
||||
sys sys_mips_mmap 6 /* 4090 */
|
||||
sys sys_munmap 2
|
||||
sys sys_truncate 2
|
||||
sys sys_ftruncate 2
|
||||
@@ -519,7 +519,7 @@ einval: li v0, -ENOSYS
|
||||
sys sys_sendfile 4
|
||||
sys sys_ni_syscall 0
|
||||
sys sys_ni_syscall 0
|
||||
sys sys_mmap2 6 /* 4210 */
|
||||
sys sys_mips_mmap2 6 /* 4210 */
|
||||
sys sys_truncate64 4
|
||||
sys sys_ftruncate64 4
|
||||
sys sys_stat64 2
|
||||
|
||||
@@ -207,7 +207,7 @@ sys_call_table:
|
||||
PTR sys_newlstat
|
||||
PTR sys_poll
|
||||
PTR sys_lseek
|
||||
PTR old_mmap
|
||||
PTR sys_mips_mmap
|
||||
PTR sys_mprotect /* 5010 */
|
||||
PTR sys_munmap
|
||||
PTR sys_brk
|
||||
|
||||
@@ -129,12 +129,12 @@ EXPORT(sysn32_call_table)
|
||||
PTR sys_newlstat
|
||||
PTR sys_poll
|
||||
PTR sys_lseek
|
||||
PTR old_mmap
|
||||
PTR sys_mips_mmap
|
||||
PTR sys_mprotect /* 6010 */
|
||||
PTR sys_munmap
|
||||
PTR sys_brk
|
||||
PTR sys32_rt_sigaction
|
||||
PTR sys32_rt_sigprocmask
|
||||
PTR sys_32_rt_sigaction
|
||||
PTR sys_32_rt_sigprocmask
|
||||
PTR compat_sys_ioctl /* 6015 */
|
||||
PTR sys_pread64
|
||||
PTR sys_pwrite64
|
||||
@@ -159,7 +159,7 @@ EXPORT(sysn32_call_table)
|
||||
PTR compat_sys_setitimer
|
||||
PTR sys_alarm
|
||||
PTR sys_getpid
|
||||
PTR sys32_sendfile
|
||||
PTR sys_32_sendfile
|
||||
PTR sys_socket /* 6040 */
|
||||
PTR sys_connect
|
||||
PTR sys_accept
|
||||
@@ -181,14 +181,14 @@ EXPORT(sysn32_call_table)
|
||||
PTR sys_exit
|
||||
PTR compat_sys_wait4
|
||||
PTR sys_kill /* 6060 */
|
||||
PTR sys32_newuname
|
||||
PTR sys_32_newuname
|
||||
PTR sys_semget
|
||||
PTR sys_semop
|
||||
PTR sysn32_semctl
|
||||
PTR sys_n32_semctl
|
||||
PTR sys_shmdt /* 6065 */
|
||||
PTR sys_msgget
|
||||
PTR sysn32_msgsnd
|
||||
PTR sysn32_msgrcv
|
||||
PTR sys_n32_msgsnd
|
||||
PTR sys_n32_msgrcv
|
||||
PTR compat_sys_msgctl
|
||||
PTR compat_sys_fcntl /* 6070 */
|
||||
PTR sys_flock
|
||||
@@ -245,15 +245,15 @@ EXPORT(sysn32_call_table)
|
||||
PTR sys_getsid
|
||||
PTR sys_capget
|
||||
PTR sys_capset
|
||||
PTR sys32_rt_sigpending /* 6125 */
|
||||
PTR sys_32_rt_sigpending /* 6125 */
|
||||
PTR compat_sys_rt_sigtimedwait
|
||||
PTR sys32_rt_sigqueueinfo
|
||||
PTR sys_32_rt_sigqueueinfo
|
||||
PTR sysn32_rt_sigsuspend
|
||||
PTR sys32_sigaltstack
|
||||
PTR compat_sys_utime /* 6130 */
|
||||
PTR sys_mknod
|
||||
PTR sys32_personality
|
||||
PTR sys32_ustat
|
||||
PTR sys_32_personality
|
||||
PTR sys_32_ustat
|
||||
PTR compat_sys_statfs
|
||||
PTR compat_sys_fstatfs /* 6135 */
|
||||
PTR sys_sysfs
|
||||
@@ -265,14 +265,14 @@ EXPORT(sysn32_call_table)
|
||||
PTR sys_sched_getscheduler
|
||||
PTR sys_sched_get_priority_max
|
||||
PTR sys_sched_get_priority_min
|
||||
PTR sys32_sched_rr_get_interval /* 6145 */
|
||||
PTR sys_32_sched_rr_get_interval /* 6145 */
|
||||
PTR sys_mlock
|
||||
PTR sys_munlock
|
||||
PTR sys_mlockall
|
||||
PTR sys_munlockall
|
||||
PTR sys_vhangup /* 6150 */
|
||||
PTR sys_pivot_root
|
||||
PTR sys32_sysctl
|
||||
PTR sys_32_sysctl
|
||||
PTR sys_prctl
|
||||
PTR compat_sys_adjtimex
|
||||
PTR compat_sys_setrlimit /* 6155 */
|
||||
|
||||
@@ -265,12 +265,12 @@ sys_call_table:
|
||||
PTR sys_olduname
|
||||
PTR sys_umask /* 4060 */
|
||||
PTR sys_chroot
|
||||
PTR sys32_ustat
|
||||
PTR sys_32_ustat
|
||||
PTR sys_dup2
|
||||
PTR sys_getppid
|
||||
PTR sys_getpgrp /* 4065 */
|
||||
PTR sys_setsid
|
||||
PTR sys32_sigaction
|
||||
PTR sys_32_sigaction
|
||||
PTR sys_sgetmask
|
||||
PTR sys_ssetmask
|
||||
PTR sys_setreuid /* 4070 */
|
||||
@@ -293,7 +293,7 @@ sys_call_table:
|
||||
PTR sys_swapon
|
||||
PTR sys_reboot
|
||||
PTR compat_sys_old_readdir
|
||||
PTR old_mmap /* 4090 */
|
||||
PTR sys_mips_mmap /* 4090 */
|
||||
PTR sys_munmap
|
||||
PTR sys_truncate
|
||||
PTR sys_ftruncate
|
||||
@@ -320,12 +320,12 @@ sys_call_table:
|
||||
PTR compat_sys_wait4
|
||||
PTR sys_swapoff /* 4115 */
|
||||
PTR compat_sys_sysinfo
|
||||
PTR sys32_ipc
|
||||
PTR sys_32_ipc
|
||||
PTR sys_fsync
|
||||
PTR sys32_sigreturn
|
||||
PTR sys32_clone /* 4120 */
|
||||
PTR sys_setdomainname
|
||||
PTR sys32_newuname
|
||||
PTR sys_32_newuname
|
||||
PTR sys_ni_syscall /* sys_modify_ldt */
|
||||
PTR compat_sys_adjtimex
|
||||
PTR sys_mprotect /* 4125 */
|
||||
@@ -339,11 +339,11 @@ sys_call_table:
|
||||
PTR sys_fchdir
|
||||
PTR sys_bdflush
|
||||
PTR sys_sysfs /* 4135 */
|
||||
PTR sys32_personality
|
||||
PTR sys_32_personality
|
||||
PTR sys_ni_syscall /* for afs_syscall */
|
||||
PTR sys_setfsuid
|
||||
PTR sys_setfsgid
|
||||
PTR sys32_llseek /* 4140 */
|
||||
PTR sys_32_llseek /* 4140 */
|
||||
PTR compat_sys_getdents
|
||||
PTR compat_sys_select
|
||||
PTR sys_flock
|
||||
@@ -356,7 +356,7 @@ sys_call_table:
|
||||
PTR sys_ni_syscall /* 4150 */
|
||||
PTR sys_getsid
|
||||
PTR sys_fdatasync
|
||||
PTR sys32_sysctl
|
||||
PTR sys_32_sysctl
|
||||
PTR sys_mlock
|
||||
PTR sys_munlock /* 4155 */
|
||||
PTR sys_mlockall
|
||||
@@ -368,7 +368,7 @@ sys_call_table:
|
||||
PTR sys_sched_yield
|
||||
PTR sys_sched_get_priority_max
|
||||
PTR sys_sched_get_priority_min
|
||||
PTR sys32_sched_rr_get_interval /* 4165 */
|
||||
PTR sys_32_sched_rr_get_interval /* 4165 */
|
||||
PTR compat_sys_nanosleep
|
||||
PTR sys_mremap
|
||||
PTR sys_accept
|
||||
@@ -397,25 +397,25 @@ sys_call_table:
|
||||
PTR sys_getresgid
|
||||
PTR sys_prctl
|
||||
PTR sys32_rt_sigreturn
|
||||
PTR sys32_rt_sigaction
|
||||
PTR sys32_rt_sigprocmask /* 4195 */
|
||||
PTR sys32_rt_sigpending
|
||||
PTR sys_32_rt_sigaction
|
||||
PTR sys_32_rt_sigprocmask /* 4195 */
|
||||
PTR sys_32_rt_sigpending
|
||||
PTR compat_sys_rt_sigtimedwait
|
||||
PTR sys32_rt_sigqueueinfo
|
||||
PTR sys_32_rt_sigqueueinfo
|
||||
PTR sys32_rt_sigsuspend
|
||||
PTR sys32_pread /* 4200 */
|
||||
PTR sys32_pwrite
|
||||
PTR sys_32_pread /* 4200 */
|
||||
PTR sys_32_pwrite
|
||||
PTR sys_chown
|
||||
PTR sys_getcwd
|
||||
PTR sys_capget
|
||||
PTR sys_capset /* 4205 */
|
||||
PTR sys32_sigaltstack
|
||||
PTR sys32_sendfile
|
||||
PTR sys_32_sendfile
|
||||
PTR sys_ni_syscall
|
||||
PTR sys_ni_syscall
|
||||
PTR sys32_mmap2 /* 4210 */
|
||||
PTR sys32_truncate64
|
||||
PTR sys32_ftruncate64
|
||||
PTR sys_mips_mmap2 /* 4210 */
|
||||
PTR sys_32_truncate64
|
||||
PTR sys_32_ftruncate64
|
||||
PTR sys_newstat
|
||||
PTR sys_newlstat
|
||||
PTR sys_newfstat /* 4215 */
|
||||
@@ -481,7 +481,7 @@ sys_call_table:
|
||||
PTR compat_sys_mq_notify /* 4275 */
|
||||
PTR compat_sys_mq_getsetattr
|
||||
PTR sys_ni_syscall /* sys_vserver */
|
||||
PTR sys32_waitid
|
||||
PTR sys_32_waitid
|
||||
PTR sys_ni_syscall /* available, was setaltroot */
|
||||
PTR sys_add_key /* 4280 */
|
||||
PTR sys_request_key
|
||||
|
||||
@@ -19,6 +19,7 @@
|
||||
#include <linux/ptrace.h>
|
||||
#include <linux/unistd.h>
|
||||
#include <linux/compiler.h>
|
||||
#include <linux/syscalls.h>
|
||||
#include <linux/uaccess.h>
|
||||
|
||||
#include <asm/abi.h>
|
||||
@@ -338,8 +339,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
|
||||
}
|
||||
|
||||
#ifdef CONFIG_TRAD_SIGNALS
|
||||
asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
|
||||
struct sigaction __user *oact)
|
||||
SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
|
||||
struct sigaction __user *, oact)
|
||||
{
|
||||
struct k_sigaction new_ka, old_ka;
|
||||
int ret;
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user